Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8"> Machine not included. Other die sizes available.

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

The most economical retractor on the market. Its lighter duty mechanism makes it appropriate for temporary displays or for advertising seasonal specials. Five widths available, all hold a 78" tall graphic. The banner snaps into the top display bar. Use banner tape to attach graphic to the base. Unit is black in color and includes a carry case. **Hardware Only, No Banner Included**

The sleek design of the Superb Retractor offers the perfect mix of form and function. The fully telescoping pole allows you to display banners from 34.5" to 86" in height. The Superb is also small enough to be used as a table top display also. The Superb allows you to keep multiple graphics on hand by using the convenient Graphic Replacement Kit (SKU 9081) as a quick change solution. Includes nylon carry case. **Hardware Only, No Banner Included**

Never worry about your losing your banner's spring tension again. The pop out wheel with release button gives you complete control over the banner's tension. Easily reapply the tension with a turn of the wheel at any time. The banner pulls out and retracts smoothly and the telescoping pole allows you to display banners from 36" to 86" tall. The retractor accepts a 33.5" wide graphic and attaches to top display bar and base with snap rails. Unit is silver in color and includes a carry case. Looks great as a tabletop too. **Hardware Only, No Banner Included**

The Signicade Deluxe improves on the best selling Signicade sandwich board sign design by now making it easier than ever to change your graphics. Your 24" x 36" rigid signage simply slides into the grooves on the face of the A-frame. The hinges are designed to lock the display in the open position to prevent it from tipping over. Includes molded handle for easy transport. Fill with water or sand for ballast. Available in Black and White.  **Hardware only, No Print Included.**

Economical and long lasting, Made of rustproof steel, these sign holders display corrugated plastic signboards. Available in 3 sizes, Step Stake, Handheld and Tabletop.

• Step Take 10"W x 30"H
• Handheld measure 1-3/4"W x 28"H
• Tabletop measure 8"W x 3"H (base).

The easel that goes anywhere. Lightweight, black steel design sets up in seconds and can support up to 5 lbs. Conveniently folds down to fit into briefcase. Available in Tabletop (14" tall) and Full Height (63" tall).

Ideal for painting, sketching, and commercial display. Lightweight and portable, folds easily to a compact 36" closed size. Durable aluminum construction features ¾"> diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a central cross brace for extra rigidity and height adjustable lower canvas support brackets. Holds canvas from 3" to 33" in height and 1" thick.

A complete professional document finishing system. Perfect for posters, displays, and documents up to 25" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat or electricity. Simply feed the item in, turn the handle, and trim. No smell, no mess, no waiting.

A wide format cold encapsulating laminator has arrived. Perfect for posters and displays up to 42" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat. Unit has an emergency stop and a reversible motor to quickly clear a misfeed. Stand and foot switch included.

Handle every document-finishing need in both the classroom and the office. This easy-to-use machine laminates instantly without heat or the complexity of a release liner. Simply turn on the rollers, feed in your document and trim. Great for use with thermal transfer paper and poster makers. Foot pedal included.

ProMask 2700 Electric Tape Laminator Manual Download

This is a short description that provides only the most important details. USI 2 is a cool, simple website that only shows this one product.

High gloss finish, protects and enhances visual images. This one mil film is great for one-way window graphics on flat surfaces.

High gloss finish, protects and enhances visual images. This one mil film is great for one-way window graphics on flat surfaces.

UV vinyl pressure-sensitive overlaminate with up to 3-year outdoor durability. Also available in luster, satin, and matte, all with UV inhibitors.

UV vinyl pressure-sensitive overlaminate with up to 3-year outdoor durability. Also available in gloss, satin, and luster, all with UV inhibitors.

UV vinyl pressure-sensitive overlaminate with up to 3-year outdoor durability. Also available in gloss, luster, and matte, all with UV inhibitors.

UV vinyl pressure-sensitive overlaminate with up to 3-year outdoor durability. Also available in gloss, satin, and matte, all with UV inhibitors.

Optically clear mounting adhesive. Features double release liner with permanent adhesive on both sides. Great for applications requiring see-through graphics

"Premium general purpose white mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
"

Make any graphic a dry-erase board. Write on/wipe off capability. For indoor graphics only.

Make any graphic a dry-erace board. Write on/wipe off capability. For indoor graphics only.

Self-adhesive roll laminating film designed for use with the ProMask 2700 Tape Laminating machine. Gloss finish. 2 Rolls/Box.

Premium pressure-sensitive adhesive suitable for image decal and high-volume mounting applications, including pre-coated mounting boards. Also ideal for mounting prints to smooth porous substrates such as foam boards, cardstock, and tempered hardboard. Provides a strong permanent bond and can be used in all your applications. Aqueous acrylic adhesive on both sides of a clear polyester 0.5mil carrier and single release paper. The new non-slip release liner allows pre-coated boards to stack safely without slippage. Also available in a variety of widths and lengths.

Premium general purpose clear mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.