Shipping carton with foam inserts for ARL2700 or CSL/Classroom 2700 roll laminator new/rounded profile; machine skus #7759, #7760, #7761, #7764 or #7765. Note: for classic/square profile ARL27" or CSL/Classroom 27" roll laminating machines, please use item #1813.
 

Replacement motor noise suppression capacitor for MRL Series roll laminators.

Replacement temperature display PC board for MRL42 roll laminator equipped with LCD display. Note: if retrofitting to machine originally equipped with LED temperature display PC board, the main heat control PC board must also be replaced to be LCD compatible, see item 0651.

Replacement temperature display bezel/lens for all MRL42 roll laminators equipped with LCD temperature display PC board. Includes one bezel and one lens.

Replacement thermal cut-off for MRL42 roll laminator. May be used in upper or lower heat shoe.

Replacement motor control PC board for MRL series roll laminators. PC board only, does not include noise suppression capacitor; see item 0616 for capacitor.

Replacement double pole main power switch for MRL Series roll laminators.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "round" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "square" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.

Feed guide fastener kit includes knurled head screw and tinnerman nut. For use on ARL and CSL/Classroom machines equipped with a formed steel feed table.

Feed guide fastener kit includes knob, hex head screw and lock washer. For use on machines equipped with an anodized aluminum feed table.

Replacement fuse holder for MRL Series 30 Amp main fuses.

Replacement 30 Amp main fuse for MRL42 roll laminators.

Replacement drive motor for MRL series roll laminators.

Replacement waste rewind/take-up mandrel for MRL42 roll laminator

Shipping carton with foam inserts for USI ProMount™ 2700 Plus

Shipping carton with foam inserts for classic/squared profile ARL25 or CSL/Classroom 25 Series III roll laminating machines.

Single speed AC gearmotor for classic/squared profile USI ARL and CSL/Classroom Series II roll laminating machines with preset, non-variable speed. May be listed as part number 300P or A0907 in Owner's Manual.

Note: part shown in photo is for identification purposes, appearance of actual service part may vary.

With its patented EzLoad technology, the Ultima 35 EzLoad is the next generation of roll laminating machines. The innovative design greatly reduces film-loading time and prevents the user from loading the film upside-down, thus eliminating costly service calls. Packed with features including a mill thickness range of 1.7mil to 5mil, one minute warm-up, paper feed guide, heat protection shield and more, the Ultima 35 EzLoad roll laminator provides a quality laminating experience. Uses EZLoad roll laminating film (#8602, #8603, #8604).

Create stickers up to 1-1/2" wide. Includes preloaded cartridge with 20' of permanent adhesive and mini idea booklet. Uses permanent or removable/repositionable adhesive cartridges.

Available machine only or in a kit.

Create-A-Sticker Kit
Kit includes a Xyron 1.5" sticker maker, a xyron tape runner, and a repositionable refill cartridge.

Create stickers, magnets, labels and laminate with the Xyron 900. Applies an even layer of adhesive to items up to 9" wide. Instantly laminates items up to 9" wide. Change applications quickly with easy load cartridges. No heat, batteries or electricity needed.

Available machine only or in a kit.

Creative Genius Kit
Kit includes Xyron 900 Creative Station (with starter cartridge), double sided laminate cartridge, and laminate magnet refill cartridge.

Makes permanent or repositionable stickers up to 2-1/2" wide. Machine comes pre-loaded with 20' of permanent adhesive. Comes with permanent adhesive cartridge and idea guide.

Easy to use lamination technology for the office. This portable cold laminator is always ready because it requires no heat electricity or warm up time. Easy to drop in cartridges apply laminate or magnet to items up to 9 in. wide that will not peel whether leaving a border or trimming to the edge.

Makes applying adhesive to mockups, storyboards, or comps up to 11.75" wide fast and easy. Instantly applies dual laminate or a laminate/adhesive combination without heat or electricity. Simply feed the item in, turn the handle, and trim. No smell, no mess, no waiting.

A complete professional document finishing system. Perfect for posters, displays, and documents up to 25" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat or electricity. Simply feed the item in, turn the handle, and trim. No smell, no mess, no waiting.

A wide format cold encapsulating laminator has arrived. Perfect for posters and displays up to 42" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat. Unit has an emergency stop and a reversible motor to quickly clear a misfeed. Stand and foot switch included.

Handle every document-finishing need in both the classroom and the office. This easy-to-use machine laminates instantly without heat or the complexity of a release liner. Simply turn on the rollers, feed in your document and trim. Great for use with thermal transfer paper and poster makers. Foot pedal included.

ProMask 2700 Electric Tape Laminator Manual Download

This is a short description that provides only the most important details. USI 2 is a cool, simple website that only shows this one product.

Complete replacement lower heat shoe assembly including heat shoe with heater and thermistor installed. Fits all USI ARL2700 Digital and CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number A4745DTF in Owner's Manual.

Replacement upper roller retaining ring for all ARL and CSL/Classroom Series II, III and 2700 roll laminators.