Laminator Parts

Replacement thermometer for all classic/squared profile ARL, and all CSL/Classroom Series roll laminating machines. May be listed as part number 915P or A4506 in Owner's Manual.

Replacement non-lighted rocker switch for all USI ARL classic/squared profile and CSL/Classroom Series II roll laminators equipped with single speed drive motors. Can be used as heat switch or drive switch; switch only, wires not included. If wires are required when using as a heat switch, see item number 3933. May be listed as part number 800P in Owner's Manual.

Replacement 25" rubber roller for 25" ARL and Series II and III CSL/Classroom roll laminators. Can be used as laminating (front) or pull (rear) roller. May be listed as part number 100C or A4556 in Owner's Manual.

Replacement plastic deflector for 25" ARL and Series III CSL/Classroom roll laminators. May be listed as part number 715C or A4565 in Owner's Manual.

Replacement temperature controlling thermoswitch for all USI ARL classic/squared profile and CSL/Classroom Series II roll laminating machines except ARL Digital. May be listed as part number 518P in Owner's Manual.

Shipping Carton w/Foam Inserts for ARL/CSL 27" Roll Laminator - Classic/Squared Profile

Heat switch kit with wires for all CSL/Classroom Series II and III roll laminators and classic/squared profile ARL roll laminators equipped with single speed drive motor and non-lighted heat switch. Kit includes one non-lighted rocker switch and two switch wires.

Heat switch kit with wires for all classic/squared profile ARL roll laminators equipped with variable speed drive motor and lighted heat power switch. Kit includes one lighted rocker switch and three switch wires.

Heat switch kit with wires for all new/rounded profile ARL and CSL/Classroom roll laminators equipped with lighted heat power switch. Kit includes one lighted rocker switch with bezel and three switch wires.

Replacement "snap-in" style heat poser switch kit. Fits all USI ARL and CSL/Classroom Series roll laminators with new/rounded profile. Includes switch, bezel and wires. Note: will fit machines equipped with or without auto shut-off timer.

Replacement upper 1" diameter supply mandrel for all 18" ARL roll laminating machines. May be listed as part number 907B or A4577 in Owner's Manual.

Lighted heat switch for all USI ARL classic/squared profile roll laminating machines equipped with variable speed motor. Switch wires not included; if switch wires are required see item number 3933.

Replacement lower 1" diameter supply mandrel for all 18" ARL roll laminating machines. May be listed as part number 907B or A4578 in Owner's Manual.

Replacement upper 1" diameter supply mandrel for all 25" ARL Series and 25" CSL/Classroom Series II and III roll laminating machines. May be listed as part number 907B or A4575 in Owner's Manual.

Replacement lower 1" diameter supply mandrel for all 25" ARL Series and 25" CSL/Classroom Series II and III roll laminating machines. May be listed as part number 907B or A4576 in Owner's Manual.

Heat shoe hanger assembly for USI ARL and CSL/Classroom roll laminators. May be listed as part number 608P in Owner's Manual.

Complete replacement feed table assembly including feed table and feed guide with knob, screw and washer. Fits USI 25" ARL and CSL/Classroom Series II and III roll laminating machines. May be listed as part number 900C in Owner's Manual.

Complete replacement feed table assembly including feed table and feed guide with knob, screw and washer. Fits USI 18" ARL laminating machines. May be listed as part number 900C in Owner's Manual.

Variable speed 90VDC gearmotor for USI ARL Series roll laminating machines. May be listed as part number 300PVSR or A3225 in Owner's Manual. Does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, W****-****, or machines with serial numbers beginning with ">H.">

Replacement leather washer for tension adjusting assembly for all ARL and CSL/Classroom roll laminators except CSL/Classroom Series I. May be listed as part number 905B or A3226 in Owner's Manual.

Replacement blue switch wire for all USI ARL and CSL/Classroom Series roll laminators equipped with Auto Shut-off Timer with new/rounded profile. Wire connects heat switch to auto shut-off timer.

Replacement idler roller for all 12"> ARL laminating machines; may be used as upper or lower. Note: does not include dowel pins or nylon idler washers. May be listed as part number 013B in Owner's Manual.

Replacement idler roller dowel pin for USI ARL and CSL/Classroom Series roll laminating machines. Does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number 014A or A4552 in Owner's Manual.

Replacement idler roller for 25" ARL and CSL/Classroom Series I, II, and III laminating machines, may be used as upper or lower. Note: does not include dowel pins or nylon idler washers. May be listed as part number 013B in Owner's Manual.

Replacement 23 tooth motor drive output sprocket for machines equipped with footage counter. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. May be listed as part number 301P or A3874 in Owner's Manual.

Replacement 19 tooth pull roll sprocket for roll laminators. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. May be listed as part number 303P or A3876 in Owner's Manual.

Replacement 20 tooth lam roll sprocket for roll laminators. Fits all ARL and CSL/Classroom Series roll laminating machines except ARL4000, all ARLPro Series, and CSL/Classroom Series I. May be listed as part number 302P or A3877 in Owner's Manual.

Replacement drive chain for classic/squared profile USI ARL and CSL/Classroom Series III roll laminating machines. May be listed as part number 304PA in Owner's Manual.

Replacement pressure adjustment plate for all classic/squared profile USI ARL and CSL/Classroom Series III roll laminating machines. May be listed as part number 400B in Owner's Manual.

Replacement pressure adjustment bracket for all ARL and CSL/Classroom series roll laminators except CSL/Classroom Series I and does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, W****-****, or machines with with serial numbers beginning with ">H."> May be listed as part number 401B or A3881 in Owner's Manual.