Laminator Parts

Operations manual for ARL1800 and 2700 Digital model roll laminators with new/rounded profile. Serial numbers: ARL2700 0602-0001 to 0905-0950; ARL1800 all.

Operations manual for ARL2700 Digital model roll laminators with new/rounded profile. Serial numbers 40001-0708 and up or 50001-0708 and up.

Operations manual for classic/squared profile Digital ARL and CSL/Classroom Series III roll laminating machines.

Operations manual for classic/squared profile ARL and CSL/Classroom Series II laminator.

New style drive motor designed for use with the PL 4-10 pouch laminating machine with serial number #39933 or higher.

Drive motor upgrade for use with the PL 4-10 pouch laminating machine with serial number #39933 or lower.

Pouch laminator switch designed for use with the PL4-12 pouch laminating machine. Also fits USI PL400 and PL900 pouch laminating machines.

Roller spring for use with the PL 4-12 pouch laminating machine.

Left case end for PL4-12 pouch laminating machine.

Right case end for PL4-12 pouch laminating machine.

Top rear roller for PL12 pouch laminating machine.

Lower rear roller for PL12 pouch laminating machine.

Top heater assembly for PL12 pouch laminating machine.

Bottom heater with thermostat for PL12 pouch laminating machine.

Thermostat for use with PL4-12 and HC3 pouch laminating machines.

Lower heater with thermostat for use with the PL4 pouch laminating machine.

Top front roller for use with PL12 pouch laminating machine.

Lower front roller for use with PL12 pouch laminating machine.

Upper heater for PL4 pouch laminating machine.

Shipping carton with foam inserts for classic/squared profile ARL 18" roll laminating machine; machine skus #0013, #7544, or #6217. Note: for new/rounded profile ARL1800 machines built 2002 or later, please use item #0612.

Replacement "snap-in" style motor drive switch. Fits all USI ARL roll laminators with new/rounded profile, and CSL/Classroom Series machines with the following serial number sequences: 0****-****, 1****-****, or 9****-****. Switch and bezel only, does not include wires. May be listed as part number A5511 in Owner's Manual

Replacement keylock switch for USI ARL roll laminating machine. Keys are included. May be listed as part number A5533 in Owner's Manual.

Replacement gray left side housing for classic/squared profile USI ARL roll laminating machines. Has hole for keylock for machines so equipped; keylock not included. May be listed as part number 703B in Owner's Manual. Note: for side housing for machines without a keylock, see part number 3914.

Shipping carton with foam inserts for ARL1800 roll laminator with new/rounded profile; machines skus #7762 or #7763. Note: for classic /squared profile ARL 18" roll laminating machines, please use item #0048.

Single speed AC gearmotor for classic/squared profile USI ARL and CSL/Classroom Series II roll laminating machines with preset, non-variable speed. May be listed as part number 300P or A0907 in Owner's Manual.

Note: part shown in photo is for identification purposes, appearance of actual service part may vary.

Replacement non-lighted rocker switch for all USI ARL classic/squared profile and CSL/Classroom Series II roll laminators equipped with single speed drive motors. Can be used as heat switch or drive switch; switch only, wires not included. If wires are required when using as a heat switch, see item number 3933. May be listed as part number 800P in Owner's Manual.

Replacement 25" rubber roller for 25" ARL and Series II and III CSL/Classroom roll laminators. Can be used as laminating (front) or pull (rear) roller. May be listed as part number 100C or A4556 in Owner's Manual.

Replacement plastic deflector for 25" ARL and Series III CSL/Classroom roll laminators. May be listed as part number 715C or A4565 in Owner's Manual.

Heat switch kit with wires for all CSL/Classroom Series II and III roll laminators and classic/squared profile ARL roll laminators equipped with single speed drive motor and non-lighted heat switch. Kit includes one non-lighted rocker switch and two switch wires.

Heat switch kit with wires for all classic/squared profile ARL roll laminators equipped with variable speed drive motor and lighted heat power switch. Kit includes one lighted rocker switch and three switch wires.