Never worry about your losing your banner's spring tension again. The pop out wheel with release button gives you complete control over the banner's tension. Easily reapply the tension with a turn of the wheel at any time. The banner pulls out and retracts smoothly and the telescoping pole allows you to display banners from 36" to 86" tall. The retractor accepts a 33.5" wide graphic and attaches to top display bar and base with snap rails. Unit is silver in color and includes a carry case. Looks great as a tabletop too. **Hardware Only, No Banner Included**

The Signicade Deluxe improves on the best selling Signicade sandwich board sign design by now making it easier than ever to change your graphics. Your 24" x 36" rigid signage simply slides into the grooves on the face of the A-frame. The hinges are designed to lock the display in the open position to prevent it from tipping over. Includes molded handle for easy transport. Fill with water or sand for ballast. Available in Black and White.  **Hardware only, No Print Included.**

Economical and long lasting, Made of rustproof steel, these sign holders display corrugated plastic signboards. Available in 3 sizes, Step Stake, Handheld and Tabletop.

• Step Take 10"W x 30"H
• Handheld measure 1-3/4"W x 28"H
• Tabletop measure 8"W x 3"H (base).

The easel that goes anywhere. Lightweight, black steel design sets up in seconds and can support up to 5 lbs. Conveniently folds down to fit into briefcase. Available in Tabletop (14" tall) and Full Height (63" tall).

Ideal for painting, sketching, and commercial display. Lightweight and portable, folds easily to a compact 36" closed size. Durable aluminum construction features ¾"> diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a central cross brace for extra rigidity and height adjustable lower canvas support brackets. Holds canvas from 3" to 33" in height and 1" thick.

Excellent precision cutting tool for light-to medium-duty work at home, office or studio. This Techni Edge Hobby Knife provides a soft grip for precision cutting, scoring, trimming, carving and more. \This tool uses #11 blades.

Made of hardenened aluminum and designed with a unique vertical protective guard to ensure safe, accurate cutting. Ideal for foam board. Precision ruled edge is graduated in inches (divided 16ths) and in centimeters (divided 1mm) for easy trimming jobs. Extra-wide 3-1/2" base has nonskid rubber backing to prevent slipping and accidental cuts. Convenient hanging ring.

Holds 12 rolls of 2-1/4" core media. Three rows of four pegs each 1-1/4" square and 11" high. 6" space between pegs. Powder-coated silver-vein finish. Heavy-duty 3" nylon casters with brakes make for easy moving and secure placement. Easy Assembly.

Mobile Rack for 2-1/4" Core Media (12 Rolls) - #8836

Holds 16 rolls of 3" core media. Four rows of four pegs each 2"> square and 11" high. 6" space between pegs. Powder-coated silver-vein finish. Heavy-duty 3" nylon casters with brakes make for easy moving and secure placement. Easy Assembly.

Mobile Rack for 3" Core Media (16 Rolls) - #8837

This Standard Laminator Cabinet is constructed of heavy-duty high-impact molded plastic which will not dent, chip, scratch or rust. It is designed to fit CSL or ARL Pro 2700 Heated Roll Laminator ARL Series roll laminators.
Features a locking cabinet and includes 3 outlet power strip with cord and 2 locking casters. Limited lifetime warranty. 27"H x 32" W x 24"D
Note: This product is not eligible for discounts.

Standard Laminator Cabinet/Cart - #9195

This functional, economical cart has an extra-large top to accommodate most laminators. The supply rack holds prints and the convenient film rack stores rolls of film up to 27" wide. Grey laminate tabletop and frame with 2" lockable casters. Supports up to 125 lbs. Assembly required. 42"W x 27"H x 26"D.

Lightweight Laminator Stand - #7448

Unique patented interlocking rail and drawer system that prevents shifting off the rails. Molded stops on the 3 smoke colored drawers prevent drawer from pushing through the back of cart. Unit has deep drawers (drawer dimensions 13 5⁄8"l x 9¾"w x 5"h) Each drawer can hold up to 3 lbs. Cart has four casters (two locking). Assembled dimensions 15 ½"d x 13"w x 26"h.

Top load (on long side) heavy duty vinyl with 2-hole badge clip. Maximum insert size: 2-1/4" x 3-3/8" (data/credit card size)

Top load (on short side) heavy duty vinyl with 2-hole badge clip. Maximum insert size: 2-1/4" x 3-3/8" (data/credit card size)

Top load (on long side) heavy duty vinyl with 5/8" slot and two 5/16" holes. Maximum insert size: 2-1/4" x 3-3/8" (data/credit card size)

Top load (on short side) heavy duty vinyl with 5/8" slot and two 5/16" holes. Maximum insert size: 2-1/4" x 3-3/8" (data/credit card size)

Metal alligator clip riveted to the end of a flexible vinyl or rugged Mylar strap. 100/Box

Adhesive backing securely attaches to ID badges without pre-cut slots. Available in Square, Rectangular, Pin and Aligator Clips.

Metal alligator clip riveted to the end of a flexible vinyl or rugged Mylar strap.

Strap cannot be pulled apart. Detach by cutting with scissors. Clear. (50/Box)

Indestructible 6" airline-safe loops secure tags to luggage.

Strong, durable and won't harm fabric. 30" long. Available in Solid Brass, Nickel Plated Steel and Aluminum.

Lightweight and Comfortable tubular strap has breakaway connector designed to release when tension becomes too great. Available in 30". Clear in color.

Holds badge in place while further extending ID placement. Use with neckchains and neck loops. Clear.

Elastic neck cord with barbed nickel-plated steel ends. For use with vinyl badge holders containing two holes (#8450 horizontal; #8452 vertical). 30" long. White.

Approx. 38" length. Available in different colors.

3/8" flat woven nylon loop with unique clasp that releases when tugged. Natural "V"> shape helps prevent ID cards from twisting. Available in different colors.

3/8" flat woven nylon loop with unique clasp that releases when tugged. Natural "V"> shape helps prevent ID cards from twisting.

Extends the reach of ID badge to 30", fastening easily to belt buckle. Available in solid and translucent colors.

This carabiner style reel with a chrome outer frame and clear vinyl strap is both fashionable and versatile. Available colors are: black, transparent clear, transparent black, transparent royal blue, and transparent red. Customization and printing of the badge reel is available upon request.