Replacement switch plate for for classic/squared profile USI ARL roll laminators equipped with variable speed drive motor. May be listed as part number 711CVSR in Owner's Manual. Note: for machines equipped with non-variable, single speed drive motor see item 3925.

Replacement knurled head feed guide screw only. For use on machines equipped with a formed steel feed table. May be listed as part number 603S in Owner's Manual.

Replacement reverse cylinder for all ARL classic/squared profile and CSL/Classroom Series II roll laminators equipped with a manual reverse crank. May be listed as part number N015 in Owner's Manual.

Replacement blue heat switch wire for USI ARL and CSL/Classroom roll laminating machines requiring a female quick disconnect terminal on both ends. Wires are sold individually and feature two female quick connect terminals. Note: for machines requiring wires with one ring terminal and one female quick disconnect terminal, see item 3934.

Replacement blue heat switch wire for USI ARL and CSL/Classroom roll laminating machines requiring a female quick disconnect terminal on one end and a ring terminal on the other end. Wires are sold individually and feature one ring terminal and one female quick connect terminal. Note: for machines requiring wires with two female quick disconnect terminals, see item 3933.

Replacement motor housing for all ARL and CSL/Classroom 27" roll laminators except machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number 702C, A3935 or A5935 in Owner's Manual.

Replacement motor drive switch for all classic/squared profile USI ARL roll laminators equipped with a variable speed motor. May be listed as part number 800PVSR or A3936 in Owner's Manual.

Replacement heat guard for all USI ARL and CSL/Classroom 27" roll laminators. May be listed as part number 512B or A3937 in Owner's Manual.

Replacement 27", 120V AC, 770 Watt heater cartridge for all USI ARL and CSL/Classroom 27" roll laminators except machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. Note: when installing 770 Watt heater in a machine originally equipped with 1200 Watt heaters, for proper machine performance, both heaters must be replaced. May be listed as part number 517P or A9703 in Owner's Manual.

Replacement complete feed table assembly for all USI ARL and CSL/Classroom 27" roll laminators. Includes feed table, guide and guide hardware. May be listed as part number 900C in Owner's Manual.

Replacement plastic deflector for all 27" classic/squared profile USI ARL and CSL/Classroom Series III roll laminating machines. May be listed as part number 715C or A3940 in Owner's Manual.

Replacement power cord for all 115V AC ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I and Series II. May be listed as part number 806P or A9906 in Owner's Manual.

Replacement core gripper dog for all USI ARL and CSL/Classroom roll laminators equipped with 1" diameter supply mandrels. Not compatible with 2 1/4" mandrels. Does not include mounting hardware. May be listed as part number 911A or A3942 in Owner's Manual.

Replacement left side panel frame assembly for all gray CSL/Classroom Series III and classic/squared profile USI ARL laminating machines except Digital model. Complete side panel frame including all brackets, and hardware. May be listed as part number 900DSA in Owner's Manual.

Replacement right side panel frame assembly for all gray CSL/Classroom Series III and classic/squared profile USI ARL laminating machines except Digital model. Complete side panel frame including all brackets, and hardware. May be listed as part number 901DSA in Owner's Manual.

Replacement 12"> rubber roller for all 12" USI ARL roll laminators. Can be used as laminating (front) or pull (rear) roller. May be listed as part number 100C or A4616 in Owner's Manual.

Film threading board for roll laminators. For all USI ARL and Classroom series machines. Can work with most machines and is easily cut-down if too wide for your specific machine.

Replacement idler roller for all 18" ARL Series roll laminators. May be used as upper or lower. Does not include dowel pins or nylon idler washers. May be listed as part number 013B or A4658 in Owner's Manual.

Replacement reinforcing bar for all 27" ARL and CSL/Classroom Series roll laminators except ARLPro2700. May be used as upper or lower, does not include mounting hardware. May be listed as part number 616B or A3993 in Owner's Manual.

Replacement supply roll spring. Fits all USI ARL and CSL/Classroom Series roll laminators. May be used as upper or lower. May be listed as part number 910P or A3995 in Owner's Manual.

Replacement tension adjustment knob. Fits all USI ARL and CSL/Classroom Series roll laminators except CSL/Classroom Series I. May be used as upper or lower. May be listed as part number 903B or A3998 in Owner's Manual.

Replacement red "heat-on" indicator light. Fits all classic/squared profile USI ARL and CSL/Classroom Series II and III roll laminating machines equipped with preset, non-variable speed drive motor. May be listed as part number 802P in Owner's Manual.

Upper 1" diameter supply mandrel for all 12" USI ARL Roll laminating machines. May be listed as part number 907B or A4627 in Owner's Manual.

Lower 1" diameter supply mandrel for all 12" USI ARL Roll laminating machines. May be listed as part number 907B or A4628 in Owner's Manual.

Replacement heat power switch for USI CSL/Classroom Series III roll laminators. May be listed as part number 800P in Owner's Manual.

Replacement digital temperature control board for all USI ARL Series Digital roll laminators except machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****.

Replacement motor drive switch for USI CSL/Classroom Series III roll laminators. May be listed as part number 800P in Owner's Manual.

Replacement thermistor assembly for all USI ARL Series Digital roll laminators except machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****.

Replacement jones socket for ARL Series roll laminators. Depending on machine model, part may be used for foot switch or fan kit applications. May be listed as part number N029 or A5096 in Owner's Manual.

These Panasonic Personal Workgroup Scanners (45 PPM and 65 PPM Models) provide industry-leading performance with versatile document handling capabilities and a compact footprint. Easy setup and operation. Scan to a network of devices, a personal computer, email, USB drive and more. Compact footprint means these scanners fit easily into the smallest of spaces such as a reception desk or small office cubicle. Scan small items such as passports and embossed hard cards to larger items such as student records and EKG results. They feature a feed tray capacity of 100 sheets and scan up to 45 or 65 pages per minute, depending on the model. Robust design offers a daily duty cycle of up to 6,000 scanned pages for item #9662 and 8,000 pages for item #9663. Many features including a large color touch screen that allows users to adjust settings from the touch panel and have quick and easy access to the most used scanning operations. Both models meet ENERGY STAR guidelines for energy efficiency. You will save space, money and time with one of these scanners!