Shipping carton with foam inserts for ARL1800 roll laminator with new/rounded profile; machines skus #7762 or #7763. Note: for classic /squared profile ARL 18" roll laminating machines, please use item #0048.

Shipping carton with foam inserts for ARL2700 or CSL/Classroom 2700 roll laminator new/rounded profile; machine skus #7759, #7760, #7761, #7764 or #7765. Note: for classic/square profile ARL27" or CSL/Classroom 27" roll laminating machines, please use item #1813.
 

Replacement motor noise suppression capacitor for MRL Series roll laminators.

Replacement temperature display PC board for MRL42 roll laminator equipped with LCD display. Note: if retrofitting to machine originally equipped with LED temperature display PC board, the main heat control PC board must also be replaced to be LCD compatible, see item 0651.

Replacement temperature display bezel/lens for all MRL42 roll laminators equipped with LCD temperature display PC board. Includes one bezel and one lens.

Replacement thermal cut-off for MRL42 roll laminator. May be used in upper or lower heat shoe.

Replacement motor control PC board for MRL series roll laminators. PC board only, does not include noise suppression capacitor; see item 0616 for capacitor.

Replacement double pole main power switch for MRL Series roll laminators.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "round" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "square" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.

Feed guide fastener kit includes knurled head screw and tinnerman nut. For use on ARL and CSL/Classroom machines equipped with a formed steel feed table.

Feed guide fastener kit includes knob, hex head screw and lock washer. For use on machines equipped with an anodized aluminum feed table.

Replacement fuse holder for MRL Series 30 Amp main fuses.

Replacement 30 Amp main fuse for MRL42 roll laminators.

Replacement drive motor for MRL series roll laminators.

Replacement waste rewind/take-up mandrel for MRL42 roll laminator

Shipping carton with foam inserts for USI ProMount™ 2700 Plus

Shipping carton with foam inserts for classic/squared profile ARL25 or CSL/Classroom 25 Series III roll laminating machines.

Single speed AC gearmotor for classic/squared profile USI ARL and CSL/Classroom Series II roll laminating machines with preset, non-variable speed. May be listed as part number 300P or A0907 in Owner's Manual.

Note: part shown in photo is for identification purposes, appearance of actual service part may vary.

Ideal for signage, presentation, and commercial display. Lightweight and portable, it folds easily to a compact 36" closed size. Durable aluminum construction features 3/4" diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a 24" long, springloaded top clamp to securely hold signs, pads, and posters up to 3/4" thick, a central cross brace for extra rigidity, and height adjustable lower canvas support brackets. Materials up to 30" high can fit between the lower support brackets and top clamp.

These powder coated steel feet are ideal for standing up either single or double-sided rigid substrates. Simply slide your board or other substrate into the opening and instantly you have a stand up display. Great for trade shows or marketing displays.

Sold in eaches. Available in 1/4" and 1/2".

Secured reinforcement for hanging or mounted artwork, signs, and more whether indoors or out. Includes grommet die, cutting punch, cutting board, 3 dozen grommets and washers. #2 Grommet with 3/8" inner diameter.

This heavy-duty machine punches the hole and sets the grommet simultaneously. Cuts laminates, foam board, plastics and more. Machine and Die included. Grommet Die #2. Inner Diameter: 1/4" Outer Diameter: 9/16" . Available in Red and Blue.

This fine art paper is acid free, contains no optical brighteners, and is made from 100% cotton. It's also coated on both sides to support two-sided printing. Medium weight (190 gsm), water resistant, and instant drying. Compatible with all inkjet printers. Use with dye or pigment inks. Available in multiple sizes and also available in sheets.

The ideal paper when you are going to laminate your inkjet print. ProMount Econo-Bond is a thin coated 24# bond inkjet paper. It is designed for use with light to moderate ink coverage.

Offers great D-max with excellent color gamut. Feel free to print on this canvas because it's compatible with all inkjet printers and pigment inks. Available in 8 1/2" x 11" and 11" x 17". 10/pack

This fine art paper is acid free, contains no optical brighteners, and is made from 100% cotton. It's also coated on both sides to support two-sided printing. Medium weight (190 gsm), water resistant, and instant drying. Compatible with all inkjet printers. Use with dye or pigment inks. Available in 8 1/2" x 11" and xx" x 17". Also available in rolls. 25/pack.

Dowels can be used where a strong rod is needed such as for a banner. This wood dowel from USI Laminate is best used with pocketed banners. Available in 2' and 3'. Also available in 1/2" diameter. 4/pk.

The highest tack two-sided banner tape available on the market. Makes banner finishing easy.

Single-sided tape for hemming banners. Use to create a super strong banner, no need to sew hems.