Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.

This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.

These 4 Steel Dowels are 24" in length and are meant to be used with items 8826, 8827, 8787 USI's versatile banner displays.

Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.

Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Other die sizes available.

Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Other die sizes available.

Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8"> Machine not included. Other die sizes available.

Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8"> Machine not included. Other die sizes available.

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

Economical and long lasting, Made of rustproof steel, these sign holders display corrugated plastic signboards. Available in 3 sizes, Step Stake, Handheld and Tabletop.

• Step Take 10"W x 30"H
• Handheld measure 1-3/4"W x 28"H
• Tabletop measure 8"W x 3"H (base).

The easel that goes anywhere. Lightweight, black steel design sets up in seconds and can support up to 5 lbs. Conveniently folds down to fit into briefcase. Available in Tabletop (14" tall) and Full Height (63" tall).

Ideal for painting, sketching, and commercial display. Lightweight and portable, folds easily to a compact 36" closed size. Durable aluminum construction features ¾"> diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a central cross brace for extra rigidity and height adjustable lower canvas support brackets. Holds canvas from 3" to 33" in height and 1" thick.

Ideal for signage, presentation, and commercial display. Lightweight and portable, it folds easily to a compact 36" closed size. Durable aluminum construction features 3/4" diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a 24" long, springloaded top clamp to securely hold signs, pads, and posters up to 3/4" thick, a central cross brace for extra rigidity, and height adjustable lower canvas support brackets. Materials up to 30" high can fit between the lower support brackets and top clamp.

These powder coated steel feet are ideal for standing up either single or double-sided rigid substrates. Simply slide your board or other substrate into the opening and instantly you have a stand up display. Great for trade shows or marketing displays.

Sold in eaches. Available in 1/4" and 1/2".

Secured reinforcement for hanging or mounted artwork, signs, and more whether indoors or out. Includes grommet die, cutting punch, cutting board, 3 dozen grommets and washers. #2 Grommet with 3/8" inner diameter.

This heavy-duty machine punches the hole and sets the grommet simultaneously. Cuts laminates, foam board, plastics and more. Machine and Die included. Grommet Die #2. Inner Diameter: 1/4" Outer Diameter: 9/16" . Available in Red and Blue.

Dowels can be used where a strong rod is needed such as for a banner. This wood dowel from USI Laminate is best used with pocketed banners. Available in 2' and 3'. Also available in 1/2" diameter. 4/pk.

The highest tack two-sided banner tape available on the market. Makes banner finishing easy.

Single-sided tape for hemming banners. Use to create a super strong banner, no need to sew hems.

Create your own tabletop or counter display. Great for your laminated documents, foam board mounted signs, or cardboard displays. Made from coated board, the material's attractive appearance and stiffness are ideal for presentations. Fast and easy to use-just peel protective tape from 1/2" self-adhesive strip running down easel spine and stick to document. Pop out back to stand easel up. Available in alternate sizes and color.

Create your own tabletop or counter display. Great for your laminated documents, foam board mounted signs, or cardboard displays. Made from coated board, the material's attractive appearance and stiffness are ideal for presentations. Fast and easy to use--just peel protective tape from 1/2" self-adhesive strip running down easel spine and stick to document. Pop out back to stand easel up. Double "wings" provide added stability. Available in alternate sizes and color.

For Grommet Kit #5455.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Brass Finish. Also available in nickel finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8" Machine not included. Brass finish.

Pierce materials up to 6mm (1/4") thick without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Brass finish.