Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.

This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.

Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.

Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Other die sizes available.

Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Other die sizes available.

Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8"> Machine not included. Other die sizes available.

Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8"> Machine not included. Other die sizes available.

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

Secured reinforcement for hanging or mounted artwork, signs, and more whether indoors or out. Includes grommet die, cutting punch, cutting board, 3 dozen grommets and washers. #2 Grommet with 3/8" inner diameter.

This heavy-duty machine punches the hole and sets the grommet simultaneously. Cuts laminates, foam board, plastics and more. Machine and Die included. Grommet Die #2. Inner Diameter: 1/4" Outer Diameter: 9/16" . Available in Red and Blue.

For Grommet Kit #5455.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Brass Finish. Also available in nickel finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8" Machine not included. Brass finish.

Pierce materials up to 6mm (1/4") thick without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Available in black, brass & Nickel finishes.

This is our largest outdoor display!  Adjusts up to 17 feet high! Get your message noticed with a custom full color digitally printed flag. You supply the art, we print it. Full color flag (42" x 120" viewable size) printed on polyester fabric. Double-folded & double-stitched hems and finished with #2 grommets for the Giant Outdoor Flag Display (included). Available in Single and Double sided.

The standard tent comes with a power coated steel frame with ABS nylon joints. Easy plastic push buttons for height adjustments and an effortless crank up canopy ensures a perfect fit. The frame is accompanied by a 1 year warranty. The tent is available for custom printing with up to 8 locations. Available tent colors: black, green, navy blue, orange, red, royal blue, white, and yellow.

Need to capture attention for an upcoming event, indoors or outdoors? We have the solution! A custom full color digitally printed banner. You supply the art, we print it and ship it. Banner is single side printed on our 13-oz semi-gloss vinyl. The first dimension is the height and the second is the width. Banner is finished with double-folded & double-stitched hems with grommets and 1/4" polypropylene rope.

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner double-side printed on our 18-oz opaque vinyl and formatted for the Versatile Boulevard Bracket. Finished with stitched pole pockets and grommet top and bottom.

Note: Stand is not included in this price.

A custom full color digitally printed flag is a great attention getter and can be used inside or outside. You supply the art, we print it and ship it. Flag is single side printed on dacron (front side correct - back side reverse). The first dimension is the height and the second is the width. Flag is finished with double-stitched hems with canvas leader and grommets.

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner printed on our 10-oz semi-gloss vinyl and formatted for the Versatile Series Banner Stands (SKUs 8787, 8826, & 8827). 24" x 71" viewable size, finished with stitched pole pockets top and bottom. Stand not included.

Optically clear mounting adhesive. Features double release liner with permanent adhesive on both sides. Great for applications requiring see-through graphics

"Premium general purpose white mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
"

Two-sided white adhesive designed for applications that require mounting to thin media. The opaque backing diminishes the effect of light as it shows through the finished piece leaving a smooth and polished print. Excellent for back lit applications and materials that are especially sensitive to heat.

Premium pressure-sensitive adhesive suitable for image decal and high-volume mounting applications, including pre-coated mounting boards. Also ideal for mounting prints to smooth porous substrates such as foam boards, cardstock, and tempered hardboard. Provides a strong permanent bond and can be used in all your applications. Aqueous acrylic adhesive on both sides of a clear polyester 0.5mil carrier and single release paper. The new non-slip release liner allows pre-coated boards to stack safely without slippage. Also available in a variety of widths and lengths.