Optically clear mounting adhesive. Features double release liner with permanent adhesive on both sides. Great for applications requiring see-through graphics
Optically clear mounting adhesive. Features double release liner with permanent adhesive on both sides. Great for applications requiring see-through graphics
"Premium general purpose white mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
"
"Premium general purpose white mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
"
Two-sided white adhesive designed for applications that require mounting to thin media. The opaque backing diminishes the effect of light as it shows through the finished piece leaving a smooth and polished print. Excellent for back lit applications and materials that are especially sensitive to heat.
Two-sided white adhesive designed for applications that require mounting to thin media. The opaque backing diminishes the effect of light as it shows through the finished piece leaving a smooth and polished print. Excellent for back lit applications and materials that are especially sensitive to heat.
Premium pressure-sensitive adhesive suitable for image decal and high-volume mounting applications, including pre-coated mounting boards. Also ideal for mounting prints to smooth porous substrates such as foam boards, cardstock, and tempered hardboard. Provides a strong permanent bond and can be used in all your applications. Aqueous acrylic adhesive on both sides of a clear polyester 0.5mil carrier and single release paper. The new non-slip release liner allows pre-coated boards to stack safely without slippage. Also available in a variety of widths and lengths.
Premium pressure-sensitive adhesive suitable for image decal and high-volume mounting applications, including pre-coated mounting boards. Also ideal for mounting prints to smooth porous substrates such as foam boards, cardstock, and tempered hardboard. Provides a strong permanent bond and can be used in all your applications. Aqueous acrylic adhesive on both sides of a clear polyester 0.5mil carrier and single release paper. The new non-slip release liner allows pre-coated boards to stack safely without slippage. Also available in a variety of widths and lengths.
Premium general purpose clear mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
Premium general purpose clear mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.
Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.
This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.
This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.
USI Laminate offers precision crafted clear push pins in a tub of 200. They have a .375" hardened steel point and the heads are .5" in length and .25" in diameter.
USI Laminate offers precision crafted clear push pins in a tub of 200. They have a .375" hardened steel point and the heads are .5" in length and .25" in diameter.
For 3M models 1711, 1720, 1730, 1740, 1760, 1780, 1810, 1820, 1830, 1840, 1850, 1860, 1870, 1880, 9050, 9060, 9070, 9080, 9100, as well as the 900 Series, 213, 300, 400 series, 2770T, and other brands specifying this lamp.
For 3M models 1711, 1720, 1730, 1740, 1760, 1780, 1810, 1820, 1830, 1840, 1850, 1860, 1870, 1880, 9050, 9060, 9070, 9080, 9100, as well as the 900 Series, 213, 300, 400 series, 2770T, and other brands specifying this lamp.
3 chamber EnduraGlide dry erase markers deliver strong, bold colors. They give you the ability to write in thick or thin lines with a versatile chisel tip. The see through ink gauge on the barrel shows you exactly how much ink is left. Available in packs of 4 and 12.
3 chamber EnduraGlide dry erase markers deliver strong, bold colors. They give you the ability to write in thick or thin lines with a versatile chisel tip. The see through ink gauge on the barrel shows you exactly how much ink is left. Available in packs of 4 and 12.
Remove ink from your marker board in an instant with this super, non-toxic product. It is specially formulated to clean, condition and restore melamine and porcelain marker board surfaces.
Remove ink from your marker board in an instant with this super, non-toxic product. It is specially formulated to clean, condition and restore melamine and porcelain marker board surfaces.
Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.
Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.
This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.
This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.
The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.
The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.
The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.
The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.
The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only. No Banner Included.**
The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only. No Banner Included.**
The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.
The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.
The most economical retractor on the market. Its lighter duty mechanism makes it appropriate for temporary displays or for advertising seasonal specials. Five widths available, all hold a 78" tall graphic. The banner snaps into the top display bar. Use banner tape to attach graphic to the base. Unit is black in color and includes a carry case. **Hardware Only, No Banner Included**
The most economical retractor on the market. Its lighter duty mechanism makes it appropriate for temporary displays or for advertising seasonal specials. Five widths available, all hold a 78" tall graphic. The banner snaps into the top display bar. Use banner tape to attach graphic to the base. Unit is black in color and includes a carry case. **Hardware Only, No Banner Included**
The sleek design of the Superb Retractor offers the perfect mix of form and function. The fully telescoping pole allows you to display banners from 34.5" to 86" in height. The Superb is also small enough to be used as a table top display also. The Superb allows you to keep multiple graphics on hand by using the convenient Graphic Replacement Kit (SKU 9081) as a quick change solution. Includes nylon carry case. **Hardware Only, No Banner Included**
The sleek design of the Superb Retractor offers the perfect mix of form and function. The fully telescoping pole allows you to display banners from 34.5" to 86" in height. The Superb is also small enough to be used as a table top display also. The Superb allows you to keep multiple graphics on hand by using the convenient Graphic Replacement Kit (SKU 9081) as a quick change solution. Includes nylon carry case. **Hardware Only, No Banner Included**
Never worry about your losing your banner's spring tension again. The pop out wheel with release button gives you complete control over the banner's tension. Easily reapply the tension with a turn of the wheel at any time. The banner pulls out and retracts smoothly and the telescoping pole allows you to display banners from 36" to 86" tall. The retractor accepts a 33.5" wide graphic and attaches to top display bar and base with snap rails. Unit is silver in color and includes a carry case. Looks great as a tabletop too. **Hardware Only, No Banner Included**
Never worry about your losing your banner's spring tension again. The pop out wheel with release button gives you complete control over the banner's tension. Easily reapply the tension with a turn of the wheel at any time. The banner pulls out and retracts smoothly and the telescoping pole allows you to display banners from 36" to 86" tall. The retractor accepts a 33.5" wide graphic and attaches to top display bar and base with snap rails. Unit is silver in color and includes a carry case. Looks great as a tabletop too. **Hardware Only, No Banner Included**