These 4 Steel Dowels are 24" in length and are meant to be used with items 8826, 8827, 8787 USI's versatile banner displays.

Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.

Offers the quickest change of graphic for the Superb Retractor (SKU 9072). Allows you to keep a library of your frequent repeating messages.

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

The most economical retractor on the market. Its lighter duty mechanism makes it appropriate for temporary displays or for advertising seasonal specials. Five widths available, all hold a 78" tall graphic. The banner snaps into the top display bar. Use banner tape to attach graphic to the base. Unit is black in color and includes a carry case. **Hardware Only, No Banner Included**

The sleek design of the Superb Retractor offers the perfect mix of form and function. The fully telescoping pole allows you to display banners from 34.5" to 86" in height. The Superb is also small enough to be used as a table top display also. The Superb allows you to keep multiple graphics on hand by using the convenient Graphic Replacement Kit (SKU 9081) as a quick change solution. Includes nylon carry case. **Hardware Only, No Banner Included**

Never worry about your losing your banner's spring tension again. The pop out wheel with release button gives you complete control over the banner's tension. Easily reapply the tension with a turn of the wheel at any time. The banner pulls out and retracts smoothly and the telescoping pole allows you to display banners from 36" to 86" tall. The retractor accepts a 33.5" wide graphic and attaches to top display bar and base with snap rails. Unit is silver in color and includes a carry case. Looks great as a tabletop too. **Hardware Only, No Banner Included**

Economical and long lasting, Made of rustproof steel, these sign holders display corrugated plastic signboards. Available in 3 sizes, Step Stake, Handheld and Tabletop.

• Step Take 10"W x 30"H
• Handheld measure 1-3/4"W x 28"H
• Tabletop measure 8"W x 3"H (base).

The easel that goes anywhere. Lightweight, black steel design sets up in seconds and can support up to 5 lbs. Conveniently folds down to fit into briefcase. Available in Tabletop (14" tall) and Full Height (63" tall).

Ideal for painting, sketching, and commercial display. Lightweight and portable, folds easily to a compact 36" closed size. Durable aluminum construction features ¾"> diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a central cross brace for extra rigidity and height adjustable lower canvas support brackets. Holds canvas from 3" to 33" in height and 1" thick.

Ideal for signage, presentation, and commercial display. Lightweight and portable, it folds easily to a compact 36" closed size. Durable aluminum construction features 3/4" diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a 24" long, springloaded top clamp to securely hold signs, pads, and posters up to 3/4" thick, a central cross brace for extra rigidity, and height adjustable lower canvas support brackets. Materials up to 30" high can fit between the lower support brackets and top clamp.

These powder coated steel feet are ideal for standing up either single or double-sided rigid substrates. Simply slide your board or other substrate into the opening and instantly you have a stand up display. Great for trade shows or marketing displays.

Sold in eaches. Available in 1/4" and 1/2".

Dowels can be used where a strong rod is needed such as for a banner. This wood dowel from USI Laminate is best used with pocketed banners. Available in 2' and 3'. Also available in 1/2" diameter. 4/pk.

The highest tack two-sided banner tape available on the market. Makes banner finishing easy.

Single-sided tape for hemming banners. Use to create a super strong banner, no need to sew hems.

Create your own tabletop or counter display. Great for your laminated documents, foam board mounted signs, or cardboard displays. Made from coated board, the material's attractive appearance and stiffness are ideal for presentations. Fast and easy to use-just peel protective tape from 1/2" self-adhesive strip running down easel spine and stick to document. Pop out back to stand easel up. Available in alternate sizes and color.

Create your own tabletop or counter display. Great for your laminated documents, foam board mounted signs, or cardboard displays. Made from coated board, the material's attractive appearance and stiffness are ideal for presentations. Fast and easy to use--just peel protective tape from 1/2" self-adhesive strip running down easel spine and stick to document. Pop out back to stand easel up. Double "wings" provide added stability. Available in alternate sizes and color.

Deep pockets with pressure-sensitive flange. Pocket is solid plastic front. Avaialble in 3 1/2" x 2", 3 1/2" x 4 1/2" and 4 1/2" x 4 1/2".

Bonds to paper, photographs and lightweight card stock to create instant magnets.

All-purpose hooks hang securely and stay straight.

Just peel off protective strip and stick to any sign, poster or banner. Hang on any metal surface.

Sticks to almost any surface and peels away without leaving messy residue. 1" x 1" size.

This 2-piece hook connects to standard ceiling grids and allows you to hang banners or signage using wire hooks, jet wire or string. 10 hooks per pack (20 pieces).

Finally a simple and effective way to hang corrugated plastic signage. Simply insert the spike end into the corrugated material so that it penetrates across the flutes, then hang it up. 100 per pack.

Finally a simple and safe way to hang foam board. Use with foam or gator board. Just twist the hook into the side of your foamboard substrate while pressing it into the foamboard. Once in place, just hang it up. 100 per pack.

LinKlip is the most simple and affordable solution to mount banners and signs to a chain link fence. Mounts perfectly every time.