Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

The Signicade Deluxe improves on the best selling Signicade sandwich board sign design by now making it easier than ever to change your graphics. Your 24" x 36" rigid signage simply slides into the grooves on the face of the A-frame. The hinges are designed to lock the display in the open position to prevent it from tipping over. Includes molded handle for easy transport. Fill with water or sand for ballast. Available in Black and White.  **Hardware only, No Print Included.**

This is our largest outdoor display!  Adjusts up to 17 feet high! Get your message noticed with a custom full color digitally printed flag. You supply the art, we print it. Full color flag (42" x 120" viewable size) printed on polyester fabric. Double-folded & double-stitched hems and finished with #2 grommets for the Giant Outdoor Flag Display (included). Available in Single and Double sided.

Our kit comes with one or two custom printed boards along with the A-Frame equipment. The boards are interchangeable giving you the freedom to change up your message as often as you like. Available in Black or White, Single Sided or Double Sided.

Need to capture attention for an upcoming event, indoors or outdoors? We have the solution! A custom full color digitally printed banner. You supply the art, we print it and ship it. Banner is single side printed on our 13-oz semi-gloss vinyl. The first dimension is the height and the second is the width. Banner is finished with double-folded & double-stitched hems with grommets and 1/4" polypropylene rope.

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner double-side printed on our 18-oz opaque vinyl and formatted for the Versatile Boulevard Bracket. Finished with stitched pole pockets and grommet top and bottom.

Note: Stand is not included in this price.

A custom full color digitally printed flag is a great attention getter and can be used inside or outside. You supply the art, we print it and ship it. Flag is single side printed on dacron (front side correct - back side reverse). The first dimension is the height and the second is the width. Flag is finished with double-stitched hems with canvas leader and grommets.

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner printed on our 10-oz semi-gloss vinyl and formatted for the Versatile Series Banner Stands (SKUs 8787, 8826, & 8827). 24" x 71" viewable size, finished with stitched pole pockets top and bottom. Stand not included.

The all-purpose knife features locking nose to firmly keep blade in place. Uses standard .025 utility blade.

Excellent precision cutting tool for light-to medium-duty work at home, office or studio. This tool uses #11 blades.

Excellent precision cutting tool for light-to medium-duty work at home, office or studio. This Techni Edge Hobby Knife provides a soft grip for precision cutting, scoring, trimming, carving and more. \This tool uses #11 blades.

The Sooper Edge features an eye-catching purple anodized finish that is FINGERPRINT FREE. Constructed of aluminum with a stainless steel cutting edge, it features a curved finger guard for safer cutting. The steel cutting edge prevents the knives from gouging the aluminum. There is a non-slip grip tape in the recessed bottom to prevent unnecessary movement during trimming and cutting. Graduated in inches (divided 16th). Approx. 2-1/2" wide. Available in a lengths from 28" to 96".

This 31" anodized aluminum ruler is difficult to misplace with its bright blue finish. Anodized finish leaves NO FINGERPRINTS. It features a nonskid bottom and easy-to-read numbers marked in graduated 16ths. A protective lip on the leading edge keeps cutting blade away from fingers. 2-1/2" wide. 

Made of hardenened aluminum and designed with a unique vertical protective guard to ensure safe, accurate cutting. Ideal for foam board. Precision ruled edge is graduated in inches (divided 16ths) and in centimeters (divided 1mm) for easy trimming jobs. Extra-wide 3-1/2" base has nonskid rubber backing to prevent slipping and accidental cuts. Convenient hanging ring.

MakerBot PLA Filament is a first-class filament optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.
 

Compatibility

MakerBot Natural PLA Filament is compatible with the MakerBot Replicator 2 and Earlier Models,MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is a set of filaments optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.

Compatibility

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is compatible with the MakerBot Replicator 2 and Earlier Models, MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) Available in Large and Small spools.

Modular stand for the Titan 40 Substrate Trimmer (#9176, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

Modular stand for the Titan 60 Substrate Trimmer (#9177, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

Modular stand for the Titan 80 Substrate Trimmer (#9178, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

Modular stand for the Titan 100 Substrate Trimmer (#9179, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

Modular stand for the Titan 120 Substrate Trimmer (#9188, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

For use with 12" Rotary Trimmer (#5456) only. Set of 3 heads decorate paper edges with wavy, perforated and deckled cuts.

Keencut Glass Cutting Cartridge (optional for Excalibur 1000)

Modular squaring arm assembly that can be added to any Fletcher Terry Titan Substrate Trimmer.

Wall Mount For item 9344