Operations manual for ClearTek2700 Digital model roll laminators with new/rounded profile. Serial numbers WO665-0708 and up or GO909-0708 and up.

Power cord for FX400 or FX1200 pouch laminating machine.

Harness assembly includes motor, heater and line cord for use with PL400 and PL900 pouch laminating machines only.

Side plate for use with PL400 and PL900 pouch laminating machines. Not to be used with PL4, PL10, or PL12 pouch laminating machines.

XL1200 Pouch Laminator Gear Side Plate with five 1/4" push nuts.

XL1200 Pouch Laminator Motor Side Plate

XL1200 Pouch Laminator Heater Assembly

Replacement motor drive switch for MRL Series roll laminators.

Replacement blue right side housing for CRL40 roll laminator. Does not include mounting screws.

Replacement blue left side housing for CRL40 roll laminator. Does not include mounting screws.

Heater element for CRL40 roll laminating machine.

Replacement heater cartridge for MRL42 roll laminator. Note: single heater cartridge only.

Replacement temperature sensing thermal couple for MRL42 roll laminator. Note: may be used as upper or lower.

Replacement motor noise suppression capacitor for MRL Series roll laminators.

Replacement temperature display PC board for MRL42 roll laminator equipped with LCD display. Note: if retrofitting to machine originally equipped with LED temperature display PC board, the main heat control PC board must also be replaced to be LCD compatible, see item 0651.

Replacement temperature display bezel/lens for all MRL42 roll laminators equipped with LCD temperature display PC board. Includes one bezel and one lens.

Replacement thermal cut-off for MRL42 roll laminator. May be used in upper or lower heat shoe.

Replacement motor control PC board for MRL series roll laminators. PC board only, does not include noise suppression capacitor; see item 0616 for capacitor.

Replacement double pole main power switch for MRL Series roll laminators.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "round" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "square" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.

Feed guide fastener kit includes knurled head screw and tinnerman nut. For use on ARL and CSL/Classroom machines equipped with a formed steel feed table.

Feed guide fastener kit includes knob, hex head screw and lock washer. For use on machines equipped with an anodized aluminum feed table.

Replacement fuse holder for MRL Series 30 Amp main fuses.

Replacement 30 Amp main fuse for MRL42 roll laminators.

Replacement drive motor for MRL series roll laminators.

Replacement waste rewind/take-up mandrel for MRL42 roll laminator

Shipping carton with foam inserts for USI ProMount™ 2700 Plus

Heater assembly for USI 31" roll laminating machine. Equivalent part number: 800ELX

Replacement slitter blade for all MRL Series roll laminators. Note: blade only, see item 5119 for complete blade holder assembly.