Replacement motor control PC board. Fits all ARL Series 120 Volt roll laminators equipped with variable speed motor. For classic/squared profile ARL roll laminators with serial numbers 9252-999 or lower see item 4764. May be listed as part number N020 or A6101 in Owner's Manual.

Replacement heat guard for all USI ARL Series 18" roll laminators. May be listed as part number 512B or A4662 in Owner's Manual.

Replacement 18", 120V AC, 800 Watt heater cartridge for all USI ARL Series 18" roll laminators. May be listed as part number 517P or A4729 in Owner's Manual.

Replacement upper roller shaft. Fits all 18" ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A4659 in Owner's Manual.

Replacement complete feed table assembly for all USI ARL Series 12"> roll laminators. Includes feed table, guide and guide hardware. May be listed as part number 900C in Owner's Manual.

Replacement heat guard for all USI ARL Series 12"> roll laminators. May be listed as part number 512B or A4611 in Owner's Manual.

Replacement upper roller shaft. Fits all 12"> ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A5728 in Owner's Manual.

Replacement lower roller shaft for 12"> USI ARL Series roll laminators. May be used as lower laminating (front) or pull (rear) roller. Note: may be used as lower laminating (front) only on machines equipped with manual reverse crank. May be listed as part number 102B or A5729 in Owner's Manual.

Replacement upper heat shoe for all 12"> USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 12"> ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement upper heat shoe for all 18" USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 18" USI ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not contain heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement control knob for ARL and CSL/Classroom roll laminators. May be used as speed control knob on ARL Series machines equipped with variable speed motor, heat control knob on ARL Digital Series machines, or heat control knob on CSL/Classroom Series III and CSL/Classroom machines with new/round profile. May be listed as part number N021 or A5846 in Owner's Manual.

Key lock kit for all classic/squared profile ARL Series roll laminators. Includes grey left side housing with key lock installed.

Operations manual for ARL1800 and 2700 Digital model roll laminators with new/rounded profile. Serial numbers: ARL2700 0602-0001 to 0905-0950; ARL1800 all.

Operations manual for ARL2700 Digital model roll laminators with new/rounded profile. Serial numbers 40001-0708 and up or 50001-0708 and up.

Operations manual for classic/squared profile Digital ARL and CSL/Classroom Series III roll laminating machines.

Operations manual for classic/squared profile ARL and CSL/Classroom Series II laminator.

Motor side plate for use with CT4, CT400, USI400, CT12, CT 1200, USI1200 pouch laminating machines.

Gear Side Plate for use with CT4, CT400, USI400, CT12, CT 1200, USI1200 pouch laminating machines. Includes five 1/4" push nuts.

Thermostat for use with CT400, USI400, CT 1200, USI1200 and BigMouth pouch laminators. Must be modified to be used with CT4 or CT12 pouch laminating machines - special order.

Motor for use with CT400, USI400, CT 1200, and USI1200 pouch laminators. Must be modified to be used with CT4 or CT12 pouch laminating machines - special order.

12" pouch Laminator Pressure Roller for use with CT12 (white), CT 1200 (black), USI1200, RC1200, XL1200, and BigMouth pouch laminating machines. Equivalent part number: 6103030

12" pouch Laminator Heater Assembly for use with CT 1200 and USI1200 pouch laminating machines. Must be modified for CT12 (white) - special order.

Rubber Foot for use with CT4, CT400, USI400, CT12, CT 1200, USI1200, RC1200, XL1200, BigMouth and Lil BigMouth pouch laminating machines. Each machines requires four. NOT sold individually. Equivalent part number: 1103022

Platen coil spring for use with CT4, CT12, CT400, CT 1200, USI400, USI1200, RC1200 pouch laminating machines. Equivalent part number: 1107020

Lighted power switch for use with CT400, USI400, CT 1200, USI1200, and RC1200 pouch laminating machines. Equivalent part number: 1302077

USI1200 and CT 1200 black pouch laminator top cover.

USI1200 and CT 1200 black pouch laminator bottom cover. New Style - can only be used with machiness that have the fuse by the line cord. Not for machines with fuse holder on bottom of the case.

Pouch Laminator Fuse Receptacle for use with USI400, CT400, USI1200, CT 1200, RC1200, XL1200 and BigMouth pouch laminating machines.