Replacement right switch label for all ARL2700 Digital model roll laminators with new/rounded profile. May be listed as part number A5927 in Owner's Manual.

Replacement 27" lower laminating roller for ARLPRO2700 roll laminators.

Replacement 27" upper laminating roller for ARLPRO2700 roll laminators.

Replacement upper digital temperature control board for all USI ARLPRO2700 Series roll laminators.

Replacement upper thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

Replacement lower thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

Replacement digital temperature control board. Fits all USI ARL2700 Digital and ARL4000 Digital roll laminators with new/rounded profile with the following serial number sequences: 40845-**** or higher, 50789-**** or higher, 8901****-****. May be listed as part number G4689B in Owner's Manual.

Replacement digital temperature control board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 90870-**** or higher, 00626-**** or higher, 10610-**** or higher, and G0910-**** or higher. May be listed as part number S4690B in Owner's Manual.

Replacement motor power supply board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-**** or, 9****-****. May be listed as part number S6102 in Owner's Manual.

Operations manual for ARL1800 and 2700 Digital model roll laminators with new/rounded profile. Serial numbers: ARL2700 0602-0001 to 0905-0950; ARL1800 all.

Operations manual for CSL/Classroom 2700 roll laminating machine with new/rounded profile. Serial numbers: Blue 0602-0001 to 0805-0871; Green 0602-0001 to 0705-0878; Purple 0702-0001 to 0605-0743.

Operations manual for ARL2700 Digital model roll laminators with new/rounded profile. Serial numbers 40001-0708 and up or 50001-0708 and up.

Operations manual for CSL/Classroom 2700 model roll laminators with new/rounded profile. Serial numbers 90001-0708 and up; 00001-0708 and up; or 10001-0708 and up.

Operations manual for classic/squared profile Digital ARL and CSL/Classroom Series III roll laminating machines.

Operations manual for classic/squared profile ARL and CSL/Classroom Series II laminator.

Shipping carton with foam inserts for classic/squared profile ARL 18" roll laminating machine; machine skus #0013, #7544, or #6217. Note: for new/rounded profile ARL1800 machines built 2002 or later, please use item #0612.

Replacement "snap-in" style motor drive switch. Fits all USI ARL roll laminators with new/rounded profile, and CSL/Classroom Series machines with the following serial number sequences: 0****-****, 1****-****, or 9****-****. Switch and bezel only, does not include wires. May be listed as part number A5511 in Owner's Manual

Replacement keylock switch for USI ARL roll laminating machine. Keys are included. May be listed as part number A5533 in Owner's Manual.

Replacement gray left side housing for classic/squared profile USI ARL roll laminating machines. Has hole for keylock for machines so equipped; keylock not included. May be listed as part number 703B in Owner's Manual. Note: for side housing for machines without a keylock, see part number 3914.

Shipping carton with foam inserts for ARL1800 roll laminator with new/rounded profile; machines skus #7762 or #7763. Note: for classic /squared profile ARL 18" roll laminating machines, please use item #0048.

Single speed AC gearmotor for classic/squared profile USI ARL and CSL/Classroom Series II roll laminating machines with preset, non-variable speed. May be listed as part number 300P or A0907 in Owner's Manual.

Note: part shown in photo is for identification purposes, appearance of actual service part may vary.

Replacement thermometer for all classic/squared profile ARL, and all CSL/Classroom Series roll laminating machines. May be listed as part number 915P or A4506 in Owner's Manual.

Replacement non-lighted rocker switch for all USI ARL classic/squared profile and CSL/Classroom Series II roll laminators equipped with single speed drive motors. Can be used as heat switch or drive switch; switch only, wires not included. If wires are required when using as a heat switch, see item number 3933. May be listed as part number 800P in Owner's Manual.

Replacement 25" rubber roller for 25" ARL and Series II and III CSL/Classroom roll laminators. Can be used as laminating (front) or pull (rear) roller. May be listed as part number 100C or A4556 in Owner's Manual.

Replacement plastic deflector for 25" ARL and Series III CSL/Classroom roll laminators. May be listed as part number 715C or A4565 in Owner's Manual.

Heat switch kit with wires for all CSL/Classroom Series II and III roll laminators and classic/squared profile ARL roll laminators equipped with single speed drive motor and non-lighted heat switch. Kit includes one non-lighted rocker switch and two switch wires.

Heat switch kit with wires for all classic/squared profile ARL roll laminators equipped with variable speed drive motor and lighted heat power switch. Kit includes one lighted rocker switch and three switch wires.

Replacement 120 Volt, 768 Watt heater cartridge for 25" ARL classic/squared profile and CSL/Classroom Series II and III roll laminating machines. May be listed as part number 517P in Owner's Manual.

Replacement upper 1" diameter supply mandrel for all 18" ARL roll laminating machines. May be listed as part number 907B or A4577 in Owner's Manual.

Lighted heat switch for all USI ARL classic/squared profile roll laminating machines equipped with variable speed motor. Switch wires not included; if switch wires are required see item number 3933.