Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.

This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.

Secured reinforcement for hanging or mounted artwork, signs, and more whether indoors or out. Includes grommet die, cutting punch, cutting board, 3 dozen grommets and washers. #2 Grommet with 3/8" inner diameter.

This heavy-duty machine punches the hole and sets the grommet simultaneously. Cuts laminates, foam board, plastics and more. Machine and Die included. Grommet Die #2. Inner Diameter: 1/4" Outer Diameter: 9/16" . Available in Red and Blue.

For Grommet Kit #5455.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Brass Finish. Also available in nickel finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8" Machine not included. Brass finish.

Pierce materials up to 6mm (1/4") thick without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Available in black, brass & Nickel finishes.

Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Other die sizes available.

Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Other die sizes available.

Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8"> Machine not included. Other die sizes available.

Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8"> Machine not included. Other die sizes available.

Accepts light and medium weight materials. Self-sharpening blade assures consistent cutting quality. Features see through clamp, adjustable backstop and metal base. Available in several sizes:

• 20 1/8"
• 28 1/4"
• 37 1/2"
• 37 1/2" With Stand
• 51"
• 51 1/8" With Stand

Self-sharpening blade cuts in both directions. Grid surface will not chip or scratch. Easily cuts light- to medium-weight paper material up to 8 sheets thick of standard 20# stock.  Can cut medium-thickness laminates made with up to 3 mil thick films. Features metal base with preprinted guides. Available in 12" & 18".

Dahle's Premium Rolling Trimmers are designed for heavy duty applications where precision is essential. Whether you are cutting mat board or a single sheet of paper, you can expect to receive the same burr free cut each and every time. This cutting capacity is made possible by a thick walled square aluminum guide rod which provides maximum strength with minimal side movement of the cutting head. Available in several sizes:

• 20 1/8"
• 26 3/8"
• 36 1/4"
• 36 1/8" With Stand
• 51 1/8"
• 51" With Stand

Heavy duty tabletop trimmer cuts through everything from cardboard, mount board and 1/16" hardboard to film, paper and dry-mount tissue. The housing fits the hand comfortably, enclosing the self-sharpening steel rotary blade to avoid accidents. Double steel-tube suspension makes for ease of use. (Trimmer only. Stand not included.) Available in several sizes:

• 18"
• 24"
• 30"
• 36"
• 42"
• 54"

"Ergonomic power grip cutting head designed for right or left-handed push or pull cutting
Convenient built-in handle for increased portability
Switch from cutter to trimmer in a matter of seconds
Cut And Trim On The Same Machine
"

The Titan is a unique bench top cutting and trimming machine. Designed to cut a wide variety of rigid material and trim a wide range of flexible material. The Titan's one piece aluminum base and robust rail assembly incorporates both a blade cutting track for rigid material up to ½" thick and trimming base for roll stock flexible materials. The Titan delivers efficiency, accuracy and the added value of knife cutting and trimming on the same unit. It can be used to cut foam board, corrugated plastic and PVC as well as trim Films, Laminates, Banners, Fabrics, Textiles and Magnetic Sheeting. Adapts to optional Stand with waste catcher, roll holder and locking wheels and optional squaring arm (sold seperately). Includes 100 blades (#5624).

Cut a variety of semi-rigid/flexible materials with the new and affordable F-60 Cutter from Fletcher-Terry. Cuts foamboard, canvas, cardboard, matboard and a variety of other digital media up to 60" in length. Best of all you have the option to use the F-60 as a table top or wall mount trimmer. Unit features a plastic knife blade cartridge (see insert) for quick and safe blade changes, as well as a “lock & cut"> feature where the cutting head lowers and locks during the cutting process.

These 4mm (3/16") clear plastic corners are perfect for foam board signs & maps. Preserve and protect, make sure your work gets to your customer undamaged. Will not mark boards yet stays firmly in place. Packed 100 per box.

Sponge Overlay required for smooth even lamination. Moderately reflective finish enhances colors while reducing glare for clear, easy viewing. Available in Gloss & Satin Matte

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

210M Dry Mount Press Heater Kit

Particle cleaning roller quickly collects and transfers dust and lint off your foam board or working surface for a clean, "dimple" free display. Perfect for cleaning foam board surface before placing document. (Pads sold separately item #7179

Replacement tacky pad for cleaning roller (#7178). 50 Sheets/Pad.

Heavy-duty 7-lb. metal weight with handles keep processed materials completely flat while cooling. Mounted prints present professional results -- no curling.