Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.

This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.

The easel that goes anywhere. Lightweight, black steel design sets up in seconds and can support up to 5 lbs. Conveniently folds down to fit into briefcase. Available in Tabletop (14" tall) and Full Height (63" tall).

Ideal for painting, sketching, and commercial display. Lightweight and portable, folds easily to a compact 36" closed size. Durable aluminum construction features ¾"> diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a central cross brace for extra rigidity and height adjustable lower canvas support brackets. Holds canvas from 3" to 33" in height and 1" thick.

Ideal for signage, presentation, and commercial display. Lightweight and portable, it folds easily to a compact 36" closed size. Durable aluminum construction features 3/4" diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a 24" long, springloaded top clamp to securely hold signs, pads, and posters up to 3/4" thick, a central cross brace for extra rigidity, and height adjustable lower canvas support brackets. Materials up to 30" high can fit between the lower support brackets and top clamp.

Create your own tabletop or counter display. Great for your laminated documents, foam board mounted signs, or cardboard displays. Made from coated board, the material's attractive appearance and stiffness are ideal for presentations. Fast and easy to use-just peel protective tape from 1/2" self-adhesive strip running down easel spine and stick to document. Pop out back to stand easel up. Available in alternate sizes and color.

Create your own tabletop or counter display. Great for your laminated documents, foam board mounted signs, or cardboard displays. Made from coated board, the material's attractive appearance and stiffness are ideal for presentations. Fast and easy to use--just peel protective tape from 1/2" self-adhesive strip running down easel spine and stick to document. Pop out back to stand easel up. Double "wings" provide added stability. Available in alternate sizes and color.

The all-purpose knife features locking nose to firmly keep blade in place. Uses standard .025 utility blade.

Excellent precision cutting tool for light-to medium-duty work at home, office or studio. This tool uses #11 blades.

Excellent precision cutting tool for light-to medium-duty work at home, office or studio. This Techni Edge Hobby Knife provides a soft grip for precision cutting, scoring, trimming, carving and more. \This tool uses #11 blades.

The Sooper Edge features an eye-catching purple anodized finish that is FINGERPRINT FREE. Constructed of aluminum with a stainless steel cutting edge, it features a curved finger guard for safer cutting. The steel cutting edge prevents the knives from gouging the aluminum. There is a non-slip grip tape in the recessed bottom to prevent unnecessary movement during trimming and cutting. Graduated in inches (divided 16th). Approx. 2-1/2" wide. Available in a lengths from 28" to 96".

This 31" anodized aluminum ruler is difficult to misplace with its bright blue finish. Anodized finish leaves NO FINGERPRINTS. It features a nonskid bottom and easy-to-read numbers marked in graduated 16ths. A protective lip on the leading edge keeps cutting blade away from fingers. 2-1/2" wide. 

Made of hardenened aluminum and designed with a unique vertical protective guard to ensure safe, accurate cutting. Ideal for foam board. Precision ruled edge is graduated in inches (divided 16ths) and in centimeters (divided 1mm) for easy trimming jobs. Extra-wide 3-1/2" base has nonskid rubber backing to prevent slipping and accidental cuts. Convenient hanging ring.

Particle cleaning roller quickly collects and transfers dust and lint off your foam board or working surface for a clean, "dimple" free display. Perfect for cleaning foam board surface before placing document. (Pads sold separately item #7179

Replacement tacky pad for cleaning roller (#7178). 50 Sheets/Pad.

Heavy-duty 7-lb. metal weight with handles keep processed materials completely flat while cooling. Mounted prints present professional results -- no curling.

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 4 mm thick white corrugated plastic board
• Permanent short term outdoor adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white foam board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per box

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white gator board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB

Each white foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Gloss finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available.Contains Box of 10 Boards

Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available. Available in boxes of 10 and 25.

The gold standard by which the professionals measure quality. USI's ProMount™ Ultra is simply the best - bar none. Individually hand crafted, each board is thoroughly inspected and signed by our skilled craftsmen to guarantee you are getting the ultimate in quality heat-activated mounting board. ProMount™ Ultra's 1/4" thick ultra-rigid foam board is made of high-density expanded polystyrene and double-thick clay-coated paper that is water resistant. Does not warp or bow when working with prints and wide-format graphics. Black. Additional sizes and colors also available.Contains Box of 10 Boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with cold adhesive. Available in boxes of 5 and 10.

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Satin Finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Luster (matte) finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Perfect for mounting artwork from lightweight layouts to heavyweight posters. Just peel back the easy-release protective liner to reveal the pressure-sensitive adhesive. Position the artwork, and press. The 3/16" board is strong, durable and warp resistant. It cuts easily and precisely, leaving clean, sharp and finished edges. Mounts without a ripple, leaving the surface smooth and flawless. Black and other sizes also available.Contains Box of 10 boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with heat activated adhesive. Available in boxes of 5 and 10.

These lightweight PVC boards have a uniform, fine, closed-cell structure that provide a low gloss luster finished surface. The moisture, scratch, and dent resistance characteristics of Sintra® make it a great choice for framing, signage, exhibits, and POP applications. Also available without adhesive.Contains Box of 10 Boards

An economical lightweight solution for outdoor signage. These 4mm (3/16") boards perfectly fit our plastic and metal sign holders.