Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.

This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.

MakerBot PLA Filament is a first-class filament optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.
 

Compatibility

MakerBot Natural PLA Filament is compatible with the MakerBot Replicator 2 and Earlier Models,MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is a set of filaments optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.

Compatibility

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is compatible with the MakerBot Replicator 2 and Earlier Models, MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) Available in Large and Small spools.

For use with 12" Rotary Trimmer (#5456) only. Set of 3 heads decorate paper edges with wavy, perforated and deckled cuts.

Keencut Glass Cutting Cartridge (optional for Excalibur 1000)

Replacement blade for the Foamwerks Circle Cutter (#9050).

Replacement blade for the Foamwerks Freestyle Cutter (#9047).

Replacement blade for the Foamwerks Straight/Bevel (#9048), Rabbet (#9049), V-Groove (#9051), and Straight (#9053) Foamboard Cutters.

Cutting head assembly for Rotatrim Mastercut (M-Series) trimmers. Compatible with skus #6866, #6953, #6824, #6826, #6827, and #6828.

Replacement blade for Rotatrim Mastercut (M-Series) trimmers. Compatible with skus #6866, #6953, #6824, #6826, #6827, and #6828.

Keencut Replacement Cutting Wheels (2) for Technic Trimmers

Medium Duty Utility Blades 100/box (for Sabre Excalibur)

A box of 100 replacement blades for most Fletcher Terry trimmers. Used with F3100/F3100s/F3000/F65/F48/Titan/Gemini/Gemini Pro/F2200/Print Cutters).

Use with the Fletcher Terry Multi-Substrate Cutter.

13 point snap-off blades.

TechniEdge® hobby blades are designed and manufactured to deliver superior precision, cut quality, durability and comfort so you can work faster and longer with fewer blade changes. The classic #11 blade is one of the industry's leading craft and hobby blades. It has a sharp, fine point for precise, detailed cuts on a wide variety of light- to medium-weight materials. Made in the USA.

These blades are compatible with the TechniEdge Precision Light-Duty Hobby Knife and the TechniEdge Precision Light-Duty Hobby Knife with Soft Grip.

Standard Replacement Blades

8-point snap-off blades. 10 blades per pack.

Optically clear mounting adhesive. Features double release liner with permanent adhesive on both sides. Great for applications requiring see-through graphics

"Premium general purpose white mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
"

Two-sided white adhesive designed for applications that require mounting to thin media. The opaque backing diminishes the effect of light as it shows through the finished piece leaving a smooth and polished print. Excellent for back lit applications and materials that are especially sensitive to heat.

Premium pressure-sensitive adhesive suitable for image decal and high-volume mounting applications, including pre-coated mounting boards. Also ideal for mounting prints to smooth porous substrates such as foam boards, cardstock, and tempered hardboard. Provides a strong permanent bond and can be used in all your applications. Aqueous acrylic adhesive on both sides of a clear polyester 0.5mil carrier and single release paper. The new non-slip release liner allows pre-coated boards to stack safely without slippage. Also available in a variety of widths and lengths.

Premium general purpose clear mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.

Particle cleaning roller quickly collects and transfers dust and lint off your foam board or working surface for a clean, "dimple" free display. Perfect for cleaning foam board surface before placing document. (Pads sold separately item #7179

Replacement tacky pad for cleaning roller (#7178). 50 Sheets/Pad.

Heavy-duty 7-lb. metal weight with handles keep processed materials completely flat while cooling. Mounted prints present professional results -- no curling.

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 4 mm thick white corrugated plastic board
• Permanent short term outdoor adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white foam board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per box

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white gator board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB