USI Standard thermal roll laminating film is a quality thermal roll laminating film. It is excellent for projects that have heavier ink coverage and need additional bonding strength. The adhesive bonds at 260-280 degrees (F)). Rolls of USI Standard film are Color Coded for easy installation and use.

USI Standard thermal roll laminating film is a quality thermal roll laminating film. It is excellent for projects that have heavier ink coverage and need additional bonding strength. The adhesive bonds at 260-280 degrees (F)). Rolls of USI Standard film are Color Coded for easy installation and use.

USI Standard thermal roll laminating film is a quality thermal roll laminating film. It is excellent for projects that have heavier ink coverage and need additional bonding strength. The adhesive bonds at 260-280 degrees (F)). Rolls of USI Standard film are Color Coded for easy installation and use.

Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.

USI DigiSeal® UV is a low-melt thermal roll laminating film designed to adhere to the specialty inks used with today's inkjet, electrostatic, laser and thermal transfer technologies. USI DigiSeal® features a premium-grade polyester film base with an aggressive co-polymer that adheres at low temperatures (185-210 degrees (F)). The UV inhibitors reduce fading and extend the life of prints up to five times longer.

Note: Laminating films with 3" cores are not supplied with USI Color Coded rolls.

USI DigiSeal® UV is a low-melt thermal roll laminating film designed to adhere to the specialty inks used with today's inkjet, electrostatic, laser and thermal transfer technologies. USI DigiSeal® features a premium-grade polyester film base with an aggressive co-polymer that adheres at low temperatures (185-210 degrees (F)). The UV inhibitors reduce fading and extend the life of prints up to five times longer.

Note: Laminating films with 3" cores are not supplied with USI Color Coded rolls.

Specially formulated for 21st-century digital imaging. It is designed to adhere to the specialty inks used in today's inkjet, electrostatic, laser and thermal transfer technologies. USI DigiSeal® features a premium-grade polyester film base with an aggressive co-polymer that adheres at low temperatures (185-200 degrees F). The UV inhibitors reduce fading and extend the life of prints up to five times longer.

Specially formulated for 21st-century digital imaging. It is designed to adhere to the specialty inks used in today's inkjet, electrostatic, laser and thermal transfer technologies. USI DigiSeal® features a premium-grade polyester film base with an aggressive co-polymer that adheres at low temperatures (185-200 degrees F). The UV inhibitors reduce fading and extend the life of prints up to five times longer.

This quality film offers all the benefits of USI DigiSeal®, but with a non-reflective finish that is softer than gloss and not as granular as matte. Excellent choice for backdrop prints or display pieces located in brightly lit areas.

This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.

Particle cleaning roller quickly collects and transfers dust and lint off your foam board or working surface for a clean, "dimple" free display. Perfect for cleaning foam board surface before placing document. (Pads sold separately item #7179

Replacement tacky pad for cleaning roller (#7178). 50 Sheets/Pad.

Heavy-duty 7-lb. metal weight with handles keep processed materials completely flat while cooling. Mounted prints present professional results -- no curling.

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 4 mm thick white corrugated plastic board
• Permanent short term outdoor adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white foam board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per box

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white gator board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB

Each white foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Gloss finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available.Contains Box of 10 Boards

Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available. Available in boxes of 10 and 25.

The gold standard by which the professionals measure quality. USI's ProMount™ Ultra is simply the best - bar none. Individually hand crafted, each board is thoroughly inspected and signed by our skilled craftsmen to guarantee you are getting the ultimate in quality heat-activated mounting board. ProMount™ Ultra's 1/4" thick ultra-rigid foam board is made of high-density expanded polystyrene and double-thick clay-coated paper that is water resistant. Does not warp or bow when working with prints and wide-format graphics. Black. Additional sizes and colors also available.Contains Box of 10 Boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with cold adhesive. Available in boxes of 5 and 10.

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Satin Finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Luster (matte) finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Perfect for mounting artwork from lightweight layouts to heavyweight posters. Just peel back the easy-release protective liner to reveal the pressure-sensitive adhesive. Position the artwork, and press. The 3/16" board is strong, durable and warp resistant. It cuts easily and precisely, leaving clean, sharp and finished edges. Mounts without a ripple, leaving the surface smooth and flawless. Black and other sizes also available.Contains Box of 10 boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with heat activated adhesive. Available in boxes of 5 and 10.

These lightweight PVC boards have a uniform, fine, closed-cell structure that provide a low gloss luster finished surface. The moisture, scratch, and dent resistance characteristics of Sintra® make it a great choice for framing, signage, exhibits, and POP applications. Also available without adhesive.Contains Box of 10 Boards

An economical lightweight solution for outdoor signage. These 4mm (3/16") boards perfectly fit our plastic and metal sign holders.

Achieve superior results with these high-quality 3/16" boards. Designed to meet all mounting requirements. Black and other sizes also available.Contains Box of 10 Boards

This high-quality board delivers a smooth edge for all mounting applications. Use for display, mounting, graphics and craft applications. White and other sizes also available.Contains Pack of 5 Boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. It also provides a good flat surface than can be screen or digitally printed. Also available with cold or heat activated adhesive. Available in boxes of 5 and 10.