Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available. Available in boxes of 10 and 25.

The gold standard by which the professionals measure quality. USI's ProMount™ Ultra is simply the best - bar none. Individually hand crafted, each board is thoroughly inspected and signed by our skilled craftsmen to guarantee you are getting the ultimate in quality heat-activated mounting board. ProMount™ Ultra's 1/4" thick ultra-rigid foam board is made of high-density expanded polystyrene and double-thick clay-coated paper that is water resistant. Does not warp or bow when working with prints and wide-format graphics. Black. Additional sizes and colors also available.Contains Box of 10 Boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with cold adhesive. Available in boxes of 5 and 10.

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Satin Finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Luster (matte) finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Perfect for mounting artwork from lightweight layouts to heavyweight posters. Just peel back the easy-release protective liner to reveal the pressure-sensitive adhesive. Position the artwork, and press. The 3/16" board is strong, durable and warp resistant. It cuts easily and precisely, leaving clean, sharp and finished edges. Mounts without a ripple, leaving the surface smooth and flawless. Black and other sizes also available.Contains Box of 10 boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with heat activated adhesive. Available in boxes of 5 and 10.

These lightweight PVC boards have a uniform, fine, closed-cell structure that provide a low gloss luster finished surface. The moisture, scratch, and dent resistance characteristics of Sintra® make it a great choice for framing, signage, exhibits, and POP applications. Also available without adhesive.Contains Box of 10 Boards

An economical lightweight solution for outdoor signage. These 4mm (3/16") boards perfectly fit our plastic and metal sign holders.

Achieve superior results with these high-quality 3/16" boards. Designed to meet all mounting requirements. Black and other sizes also available.Contains Box of 10 Boards

This high-quality board delivers a smooth edge for all mounting applications. Use for display, mounting, graphics and craft applications. White and other sizes also available.Contains Pack of 5 Boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. It also provides a good flat surface than can be screen or digitally printed. Also available with cold or heat activated adhesive. Available in boxes of 5 and 10.

USI ProMount™ PVC is a high-performance, moderately expanded PVC foam sheet for high-end graphics and architectural applications. The fine cell structure and smooth surface finish makes it a superior choice for professional printers, sign makers and exhibition contractors. Each board has a polyethylene masking on one side which removes cleanly revealing a smooth surface finish ideally suited for screen and digital printing applications.Contains Box of 10 boards

USI ProMount™ PVC is a high-performance, moderately expanded PVC foam sheet for high-end graphics and architectural applications. The fine cell structure and smooth surface finish makes it a superior choice for professional printers, sign makers and exhibition contractors. Each board has a polyethylene masking on one side which removes cleanly revealing a smooth surface finish ideally suited for screen and digital printing applications.Contains Box of 10 boards

These lightweight PVC boards have a uniform, fine, closed-cell structure that provide a low gloss luster finished surface. The moisture, scratch, and dent resistance characteristics of Sintra® make it a great choice for framing, signage, exhibits, and POP applications. Also available coated with cold adhesive. Contains box of 10 boards

These lightweight PVC boards have a uniform, fine, closed-cell structure that provide a low gloss luster finished surface. The moisture, scratch, and dent resistance characteristics of Sintra® make it a great choice for framing, signage, exhibits, and POP applications. Also available coated with cold adhesive. Contains box of 5 boards

Sponge Overlay required for smooth even lamination. Moderately reflective finish enhances colors while reducing glare for clear, easy viewing. Available in Gloss & Satin Matte

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

High gloss finish, protects and enhances visual images. This one mil film is great for one-way window graphics on flat surfaces.

High gloss finish, protects and enhances visual images. This one mil film is great for one-way window graphics on flat surfaces.

UV vinyl pressure-sensitive overlaminate with up to 3-year outdoor durability. Also available in luster, satin, and matte, all with UV inhibitors.

UV vinyl pressure-sensitive overlaminate with up to 3-year outdoor durability. Also available in gloss, satin, and luster, all with UV inhibitors.

UV vinyl pressure-sensitive overlaminate with up to 3-year outdoor durability. Also available in gloss, luster, and matte, all with UV inhibitors.

UV vinyl pressure-sensitive overlaminate with up to 3-year outdoor durability. Also available in gloss, satin, and matte, all with UV inhibitors.

Optically clear mounting adhesive. Features double release liner with permanent adhesive on both sides. Great for applications requiring see-through graphics

"Premium general purpose white mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
"

Two-sided white adhesive designed for applications that require mounting to thin media. The opaque backing diminishes the effect of light as it shows through the finished piece leaving a smooth and polished print. Excellent for back lit applications and materials that are especially sensitive to heat.

An extremely sturdy textured vinyl (PVC) film perfect for trade show graphics, pop-up displays and floor graphics. 6 mil.