Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Other die sizes available.

Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Other die sizes available.

Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8"> Machine not included. Other die sizes available.

Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8"> Machine not included. Other die sizes available.

Secured reinforcement for hanging or mounted artwork, signs, and more whether indoors or out. Includes grommet die, cutting punch, cutting board, 3 dozen grommets and washers. #2 Grommet with 3/8" inner diameter.

This heavy-duty machine punches the hole and sets the grommet simultaneously. Cuts laminates, foam board, plastics and more. Machine and Die included. Grommet Die #2. Inner Diameter: 1/4" Outer Diameter: 9/16" . Available in Red and Blue.

For Grommet Kit #5455.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Brass Finish. Also available in nickel finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8" Machine not included. Brass finish.

Pierce materials up to 6mm (1/4") thick without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Available in black, brass & Nickel finishes.

Operations manual for ARL1800 and 2700 Digital model roll laminators with new/rounded profile. Serial numbers: ARL2700 0602-0001 to 0905-0950; ARL1800 all.

Operations manual for CSL/Classroom 2700 roll laminating machine with new/rounded profile. Serial numbers: Blue 0602-0001 to 0805-0871; Green 0602-0001 to 0705-0878; Purple 0702-0001 to 0605-0743.

Operations manual for ARL2700 Digital model roll laminators with new/rounded profile. Serial numbers 40001-0708 and up or 50001-0708 and up.

Operations manual for CSL/Classroom 2700 model roll laminators with new/rounded profile. Serial numbers 90001-0708 and up; 00001-0708 and up; or 10001-0708 and up.

Operations manual for ClearTek2700 Digital model roll laminators with new/rounded profile. Serial numbers WO665-0708 and up or GO909-0708 and up.

Operations manual for classic/squared profile Digital ARL and CSL/Classroom Series III roll laminating machines.

Operations manual for classic/squared profile ARL and CSL/Classroom Series II laminator.

Motor for SM-330 Pouch Laminator.

Motor for use with the BigMouth mounting pouch laminating machine.

Side plate set for use with the BigMouth mounting pouch laminator. Includes five 1/4" push nuts, two side plates (one with metal pin and one without), and four P-shaped plastic arms.

Motor side plate for use with CT4, CT400, USI400, CT12, CT 1200, USI1200 pouch laminating machines.

Gear Side Plate for use with CT4, CT400, USI400, CT12, CT 1200, USI1200 pouch laminating machines. Includes five 1/4" push nuts.

Thermostat for use with CT400, USI400, CT 1200, USI1200 and BigMouth pouch laminators. Must be modified to be used with CT4 or CT12 pouch laminating machines - special order.

Motor for use with CT400, USI400, CT 1200, and USI1200 pouch laminators. Must be modified to be used with CT4 or CT12 pouch laminating machines - special order.

12" pouch Laminator Pressure Roller for use with CT12 (white), CT 1200 (black), USI1200, RC1200, XL1200, and BigMouth pouch laminating machines. Equivalent part number: 6103030

12" pouch Laminator Heater Assembly for use with CT 1200 and USI1200 pouch laminating machines. Must be modified for CT12 (white) - special order.

New style drive motor designed for use with the PL 4-10 pouch laminating machine with serial number #39933 or higher.

Drive motor upgrade for use with the PL 4-10 pouch laminating machine with serial number #39933 or lower.