Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Other die sizes available.

Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Other die sizes available.

Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8"> Machine not included. Other die sizes available.

Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8"> Machine not included. Other die sizes available.

Secured reinforcement for hanging or mounted artwork, signs, and more whether indoors or out. Includes grommet die, cutting punch, cutting board, 3 dozen grommets and washers. #2 Grommet with 3/8" inner diameter.

This heavy-duty machine punches the hole and sets the grommet simultaneously. Cuts laminates, foam board, plastics and more. Machine and Die included. Grommet Die #2. Inner Diameter: 1/4" Outer Diameter: 9/16" . Available in Red and Blue.

For Grommet Kit #5455.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Brass Finish. Also available in nickel finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8" Machine not included. Brass finish.

Pierce materials up to 6mm (1/4") thick without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Available in black, brass & Nickel finishes.

Print Media: ProMount OptiBond Premium
Laminate Media: USI Opti Clear Gloss 3-mil

Custom full color digitally printed Poster. You supply the art, we print it.

Print Media: ProMount OptiBond Premium
Laminate Media: USI Opti Clear Gloss 3-mil
Mounting Media: ProMount Ultra - White

Custom full color digitally printed Poster. You supply the art, we print it. Full color poster.

Replacement motor control PC board. Fits all ARL Series 120 Volt roll laminators equipped with variable speed motor. For classic/squared profile ARL roll laminators with serial numbers 9252-999 or lower see item 4764. May be listed as part number N020 or A6101 in Owner's Manual.

Replacement friction disk. Fits all USI ARL and CSL/Classroom Series roll laminators except CSL/Classroom Series I. May be used as upper or lower. May be listed as part number 906B or A5104 in Owner's Manual.

Replacement heat guard for all USI ARL Series 18" roll laminators. May be listed as part number 512B or A4662 in Owner's Manual.

Replacement 18", 120V AC, 800 Watt heater cartridge for all USI ARL Series 18" roll laminators. May be listed as part number 517P or A4729 in Owner's Manual.

Replacement upper roller shaft. Fits all 18" ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A4659 in Owner's Manual.

Replacement complete feed table assembly for all USI ARL Series 12"> roll laminators. Includes feed table, guide and guide hardware. May be listed as part number 900C in Owner's Manual.

Replacement heat guard for all USI ARL Series 12"> roll laminators. May be listed as part number 512B or A4611 in Owner's Manual.

Replacement upper roller shaft. Fits all 12"> ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A5728 in Owner's Manual.

Replacement lower roller shaft for 12"> USI ARL Series roll laminators. May be used as lower laminating (front) or pull (rear) roller. Note: may be used as lower laminating (front) only on machines equipped with manual reverse crank. May be listed as part number 102B or A5729 in Owner's Manual.

Replacement upper heat shoe for all 12"> USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 12"> ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement upper heat shoe for all 18" USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 18" USI ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not contain heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Heater assembly for USI 31" roll laminating machine. Equivalent part number: 800ELX

Replacement slitter blade for all MRL Series roll laminators. Note: blade only, see item 5119 for complete blade holder assembly.

Replacement feed table for MRL42 roll laminator. Note: does not include feed guide. See items 5851 and 3928 for feed guide and hardware.