Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.

This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.

For 3M models 1711, 1720, 1730, 1740, 1760, 1780, 1810, 1820, 1830, 1840, 1850, 1860, 1870, 1880, 9050, 9060, 9070, 9080, 9100, as well as the 900 Series, 213, 300, 400 series, 2770T, and other brands specifying this lamp.

For 3M 2000AG and 2000GT as well as other brands specifying this lamp.

For Highland 1610 overhead projector as well as other brands specifying this lamp.

These 4mm (3/16") clear plastic corners are perfect for foam board signs & maps. Preserve and protect, make sure your work gets to your customer undamaged. Will not mark boards yet stays firmly in place. Packed 100 per box.

Sponge Overlay required for smooth even lamination. Moderately reflective finish enhances colors while reducing glare for clear, easy viewing. Available in Gloss & Satin Matte

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

210M Dry Mount Press Heater Kit

Operations manual for ARL1800 and 2700 Digital model roll laminators with new/rounded profile. Serial numbers: ARL2700 0602-0001 to 0905-0950; ARL1800 all.

Operations manual for CSL/Classroom 2700 roll laminating machine with new/rounded profile. Serial numbers: Blue 0602-0001 to 0805-0871; Green 0602-0001 to 0705-0878; Purple 0702-0001 to 0605-0743.

Operations manual for ARL2700 Digital model roll laminators with new/rounded profile. Serial numbers 40001-0708 and up or 50001-0708 and up.

Operations manual for CSL/Classroom 2700 model roll laminators with new/rounded profile. Serial numbers 90001-0708 and up; 00001-0708 and up; or 10001-0708 and up.

Operations manual for ClearTek2700 Digital model roll laminators with new/rounded profile. Serial numbers WO665-0708 and up or GO909-0708 and up.

Operations manual for classic/squared profile Digital ARL and CSL/Classroom Series III roll laminating machines.

Operations manual for classic/squared profile ARL and CSL/Classroom Series II laminator.

Motor for SM-330 Pouch Laminator.

Motor for use with the BigMouth mounting pouch laminating machine.

Side plate set for use with the BigMouth mounting pouch laminator. Includes five 1/4" push nuts, two side plates (one with metal pin and one without), and four P-shaped plastic arms.

Motor side plate for use with CT4, CT400, USI400, CT12, CT 1200, USI1200 pouch laminating machines.

Gear Side Plate for use with CT4, CT400, USI400, CT12, CT 1200, USI1200 pouch laminating machines. Includes five 1/4" push nuts.

Thermostat for use with CT400, USI400, CT 1200, USI1200 and BigMouth pouch laminators. Must be modified to be used with CT4 or CT12 pouch laminating machines - special order.

Motor for use with CT400, USI400, CT 1200, and USI1200 pouch laminators. Must be modified to be used with CT4 or CT12 pouch laminating machines - special order.

12" pouch Laminator Pressure Roller for use with CT12 (white), CT 1200 (black), USI1200, RC1200, XL1200, and BigMouth pouch laminating machines. Equivalent part number: 6103030

12" pouch Laminator Heater Assembly for use with CT 1200 and USI1200 pouch laminating machines. Must be modified for CT12 (white) - special order.

New style drive motor designed for use with the PL 4-10 pouch laminating machine with serial number #39933 or higher.

Drive motor upgrade for use with the PL 4-10 pouch laminating machine with serial number #39933 or lower.

Rubber Foot for use with CT4, CT400, USI400, CT12, CT 1200, USI1200, RC1200, XL1200, BigMouth and Lil BigMouth pouch laminating machines. Each machines requires four. NOT sold individually. Equivalent part number: 1103022