Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.

This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.

For 3M models 1711, 1720, 1730, 1740, 1760, 1780, 1810, 1820, 1830, 1840, 1850, 1860, 1870, 1880, 9050, 9060, 9070, 9080, 9100, as well as the 900 Series, 213, 300, 400 series, 2770T, and other brands specifying this lamp.

For 3M 2000AG and 2000GT as well as other brands specifying this lamp.

For Highland 1610 overhead projector as well as other brands specifying this lamp.

Manufacturer warranties typically cover defects in parts and workmanship typically for a specified time period. USI's Extended Warranty Plan offers customers of its CSL 2700 (#7759), ARL 2700 (#7764) and ARL 2700 with Fans (#7765) roll laminators additional protection that both enhances and extends the manufacturer's warranty. With USI Extended Warranty Plan, your product will be repaired or serviced to like-new working condition. The Plan provides unlimited email, phone and web-based support, as well as replacement parts, equipment, and return shipping due to normal wear and tear and accidental damage during the Coverage Period, subject to some limitations. The Extended Warranty is available in lengths of 1 and 3 years. You can view the Terms and Conditions of the Extended Warranty Plan online here.

Variable speed 90VDC gearmotor for USI ARL Series roll laminating machines. Fits machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, W****-****, or machines with serial numbers beginning with ">H.">
 

The innovative design of the HeatSeal Ultima 65 EzLoad laminator reduces film-loading time and prevents the user from loading the film upside-down, thus eliminating costly down-time and service calls. Features include a mill thickness range of 1.7mil to 3mil, a paper feed guide, heat protection shield and more.  This laminator uses EZLoad roll laminating film #9441.

A complete professional document finishing system. Perfect for posters, displays, and documents up to 25" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat or electricity. Simply feed the item in, turn the handle, and trim. No smell, no mess, no waiting.

A wide format cold encapsulating laminator has arrived. Perfect for posters and displays up to 42" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat. Unit has an emergency stop and a reversible motor to quickly clear a misfeed. Stand and foot switch included.

Optically clear mounting adhesive. Features double release liner with permanent adhesive on both sides. Great for applications requiring see-through graphics

"Premium general purpose white mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
"

Two-sided white adhesive designed for applications that require mounting to thin media. The opaque backing diminishes the effect of light as it shows through the finished piece leaving a smooth and polished print. Excellent for back lit applications and materials that are especially sensitive to heat.

Premium pressure-sensitive adhesive suitable for image decal and high-volume mounting applications, including pre-coated mounting boards. Also ideal for mounting prints to smooth porous substrates such as foam boards, cardstock, and tempered hardboard. Provides a strong permanent bond and can be used in all your applications. Aqueous acrylic adhesive on both sides of a clear polyester 0.5mil carrier and single release paper. The new non-slip release liner allows pre-coated boards to stack safely without slippage. Also available in a variety of widths and lengths.

Premium general purpose clear mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.

Complete replacement lower heat shoe assembly including heat shoe with heater and thermistor installed. Fits all USI ARL2700 Digital and CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number A4745DTF in Owner's Manual.

Replacement upper roller retaining ring for all ARL and CSL/Classroom Series II, III and 2700 roll laminators.

Replacement right switch label for all ARL2700 Digital model roll laminators with new/rounded profile. May be listed as part number A5927 in Owner's Manual.

Replacement 27" lower laminating roller for ARLPRO2700 roll laminators.

Replacement 27" upper laminating roller for ARLPRO2700 roll laminators.

Replacement upper digital temperature control board for all USI ARLPRO2700 Series roll laminators.

Replacement upper thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

Replacement lower thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

Replacement shoulder screw for mounting lower heat shoe assembly. Fits all USI ARL2700 Digital and CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number G4510 in Owner's Manual.

Replacement digital temperature control board. Fits all USI ARL2700 Digital and ARL4000 Digital roll laminators with new/rounded profile with the following serial number sequences: 40845-**** or higher, 50789-**** or higher, 8901****-****. May be listed as part number G4689B in Owner's Manual.

Replacement thermistor assembly for all USI ARL2700 Digital, ARL4000 Digital and CSL/Classroom 2700 Series roll laminators with the following serial number sequences: 00625-**** and higher, 10609-**** and higher, 40845-**** and higher, 50789-**** and higher, 90869-**** and higher, G0909-**** and higher, W0665-**** and higher, or 8901-****-****.

Replacement digital temperature control board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 90870-**** or higher, 00626-**** or higher, 10610-**** or higher, and G0910-**** or higher. May be listed as part number S4690B in Owner's Manual.

Replacement motor power supply board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-**** or, 9****-****. May be listed as part number S6102 in Owner's Manual.