The Signicade Deluxe improves on the best selling Signicade sandwich board sign design by now making it easier than ever to change your graphics. Your 24" x 36" rigid signage simply slides into the grooves on the face of the A-frame. The hinges are designed to lock the display in the open position to prevent it from tipping over. Includes molded handle for easy transport. Fill with water or sand for ballast. Available in Black and White.  **Hardware only, No Print Included.**

Our kit comes with one or two custom printed boards along with the A-Frame equipment. The boards are interchangeable giving you the freedom to change up your message as often as you like. Available in Black or White, Single Sided or Double Sided.

A simple way to add extra allure to any table throw. Made of a polyester poplin fabric, this runner is available in 28" and 57" widths and is also available either blank, with thermal imprint or as a full bleed dye sub. It is perfect for promotional and school events. The fabric is flame retardant and wrinkle resistant. Available colors: black, blueberry, royal blue, ivory, yellow, burgundy, charcoal, kelly green, navy blue, white, beige, red, gray, hunter green, and purple.

A simple way to add extra allure to any table throw. Made of a polyester poplin fabric, this runner is available in 28" and 57" widths and is also available either blank, with thermal imprint or as a full bleed dye sub. It is perfect for promotional and school events. The fabric is flame retardant and wrinkle resistant. Available colors: black, blueberry, royal blue, yellow, burgundy, charcoal, navy blue, white, red, gray, hunter green, and purple.

Enhance our stylish and elegant table throws with a full-color dye sublimation on the front panel of a white throw to maximize the impact of your image at events and shows. Dye Sublimation allows you to show detailed or photographic images on the throw. Made from premium quality polyester twil, they are easy to care for and can be easily washed. The stain and wrinkle resistant fabric is also flame retardant. Easy to store and ship with addition of optional carry case (#9336). Also available in 8' size.

Enhance our stylish and elegant table throws with a full-color thermal imprint on the front panel to professionally present your image at events and shows. The open back of the economy or 3-sided throw allows for easy access to storage under the table or for seating. Made from premium quality polyester twill and available in multiple colors, they are easy to care for and can be easily washed. The stain and wrinkle resistant fabric is also flame retardant. Easy to store and ship with addition of optional carry case (#9336). Also available in 8' size.

Enhance our stylish and elegant table throws with a full-color thermal imprint on the front panel to professionally present your image at events and shows. Made from premium quality polyester twill and available in multiple colors, they are easy to care for and can be easily washed. The stain and wrinkle resistant fabric is also flame retardant. Easy to store and ship with addition of optional carry case (#9336). Also available in 8' size.

Replacement motor control PC board. Fits all ARL Series 120 Volt roll laminators equipped with variable speed motor. For classic/squared profile ARL roll laminators with serial numbers 9252-999 or lower see item 4764. May be listed as part number N020 or A6101 in Owner's Manual.

Replacement friction disk. Fits all USI ARL and CSL/Classroom Series roll laminators except CSL/Classroom Series I. May be used as upper or lower. May be listed as part number 906B or A5104 in Owner's Manual.

Replacement heat guard for all USI ARL Series 18" roll laminators. May be listed as part number 512B or A4662 in Owner's Manual.

Replacement 18", 120V AC, 800 Watt heater cartridge for all USI ARL Series 18" roll laminators. May be listed as part number 517P or A4729 in Owner's Manual.

Replacement upper roller shaft. Fits all 18" ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A4659 in Owner's Manual.

Replacement complete feed table assembly for all USI ARL Series 12"> roll laminators. Includes feed table, guide and guide hardware. May be listed as part number 900C in Owner's Manual.

Replacement heat guard for all USI ARL Series 12"> roll laminators. May be listed as part number 512B or A4611 in Owner's Manual.

Replacement upper roller shaft. Fits all 12"> ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A5728 in Owner's Manual.

Replacement lower roller shaft for 12"> USI ARL Series roll laminators. May be used as lower laminating (front) or pull (rear) roller. Note: may be used as lower laminating (front) only on machines equipped with manual reverse crank. May be listed as part number 102B or A5729 in Owner's Manual.

Replacement upper heat shoe for all 12"> USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 12"> ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement upper heat shoe for all 18" USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 18" USI ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not contain heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Heater assembly for USI 31" roll laminating machine. Equivalent part number: 800ELX

Replacement slitter blade for all MRL Series roll laminators. Note: blade only, see item 5119 for complete blade holder assembly.

Replacement feed table for MRL42 roll laminator. Note: does not include feed guide. See items 5851 and 3928 for feed guide and hardware.

Replacement upper 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement lower 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement core gripper for 2 1/4" supply mandrel. Fits CSL/Classroom Series II and MRL Series roll laminators. Note: does not include mounting hardware.

Replacement control knob for ARL and CSL/Classroom roll laminators. May be used as speed control knob on ARL Series machines equipped with variable speed motor, heat control knob on ARL Digital Series machines, or heat control knob on CSL/Classroom Series III and CSL/Classroom machines with new/round profile. May be listed as part number N021 or A5846 in Owner's Manual.

Replacement deep/extended feed guide for MRL42 roll laminator. Note: does not include mounting hardware, see item 3928 for mounting hardware.

Shipping carton with foam inserts and pallet for MRL42 roll laminator.

Key lock kit for all classic/squared profile ARL Series roll laminators. Includes grey left side housing with key lock installed.