Offers the quickest change of graphic for the Superb Retractor (SKU 9072). Allows you to keep a library of your frequent repeating messages.

The most economical retractor on the market. Its lighter duty mechanism makes it appropriate for temporary displays or for advertising seasonal specials. Five widths available, all hold a 78" tall graphic. The banner snaps into the top display bar. Use banner tape to attach graphic to the base. Unit is black in color and includes a carry case. **Hardware Only, No Banner Included**

The sleek design of the Superb Retractor offers the perfect mix of form and function. The fully telescoping pole allows you to display banners from 34.5" to 86" in height. The Superb is also small enough to be used as a table top display also. The Superb allows you to keep multiple graphics on hand by using the convenient Graphic Replacement Kit (SKU 9081) as a quick change solution. Includes nylon carry case. **Hardware Only, No Banner Included**

Never worry about your losing your banner's spring tension again. The pop out wheel with release button gives you complete control over the banner's tension. Easily reapply the tension with a turn of the wheel at any time. The banner pulls out and retracts smoothly and the telescoping pole allows you to display banners from 36" to 86" tall. The retractor accepts a 33.5" wide graphic and attaches to top display bar and base with snap rails. Unit is silver in color and includes a carry case. Looks great as a tabletop too. **Hardware Only, No Banner Included**

Kit includes printed display and retractor stand. Full color banner printed on our 13-oz super smooth opaque vinyl and formatted for the Superb Retractor. 33.5" x 77" viewable size.

Kit includes printed display and retractor stand. Full color banner printed on our 13-oz super smooth opaque vinyl and formatted for the Supreme Retractor. 33.5" x 85" viewable size.

A complete professional document finishing system. Perfect for posters, displays, and documents up to 25" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat or electricity. Simply feed the item in, turn the handle, and trim. No smell, no mess, no waiting.

A wide format cold encapsulating laminator has arrived. Perfect for posters and displays up to 42" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat. Unit has an emergency stop and a reversible motor to quickly clear a misfeed. Stand and foot switch included.

More than 3,400 regulatory compliant predesigned signs, labels and tags:

• All available in English, Spanish, Canadian French, and Brazilian Portuguese. Standard “signal” words in 25 additional languages. Bilingual formats - combinations of any two languages.




• Includes all twenty-six ANSI Z535.2 formats, OSHA compliant design.




• Customization is easy and reliable with numerous built-in formats




• Edit predetermined signs or create your own




• Complete user control of text formatting




• Editing dialogs include built-in compliance information for quick and reliable editing




• Easily import your company logo, symbols and other graphics




• Print to your desired media




• Available on CD-ROM or via web-based digital distribution. Safety Softworks is a perpetual license that can be installed on up to 2 computers. The user-friendly, Windows-based software is easy to understand with simple point and click menus and features.

Complete replacement lower heat shoe assembly including heat shoe with heater and thermistor installed. Fits all USI ARL2700 Digital and CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number A4745DTF in Owner's Manual.

Replacement upper roller retaining ring for all ARL and CSL/Classroom Series II, III and 2700 roll laminators.

Replacement right switch label for all ARL2700 Digital model roll laminators with new/rounded profile. May be listed as part number A5927 in Owner's Manual.

Replacement 27" lower laminating roller for ARLPRO2700 roll laminators.

Replacement 27" upper laminating roller for ARLPRO2700 roll laminators.

Replacement upper digital temperature control board for all USI ARLPRO2700 Series roll laminators.

Replacement upper thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

Replacement lower thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

Replacement shoulder screw for mounting lower heat shoe assembly. Fits all USI ARL2700 Digital and CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number G4510 in Owner's Manual.

Replacement digital temperature control board. Fits all USI ARL2700 Digital and ARL4000 Digital roll laminators with new/rounded profile with the following serial number sequences: 40845-**** or higher, 50789-**** or higher, 8901****-****. May be listed as part number G4689B in Owner's Manual.

Replacement thermistor assembly for all USI ARL2700 Digital, ARL4000 Digital and CSL/Classroom 2700 Series roll laminators with the following serial number sequences: 00625-**** and higher, 10609-**** and higher, 40845-**** and higher, 50789-**** and higher, 90869-**** and higher, G0909-**** and higher, W0665-**** and higher, or 8901-****-****.

Replacement digital temperature control board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 90870-**** or higher, 00626-**** or higher, 10610-**** or higher, and G0910-**** or higher. May be listed as part number S4690B in Owner's Manual.

Replacement motor power supply board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-**** or, 9****-****. May be listed as part number S6102 in Owner's Manual.

Replacement motor power supply fuse for all 120Volt ARL, ARL Digital, ARLPRO and CSL/Classroom Series laminators equipped with a motor power supply.

Replacement motor control PC board. Fits all ARL Series 120 Volt roll laminators equipped with variable speed motor. For classic/squared profile ARL roll laminators with serial numbers 9252-999 or lower see item 4764. May be listed as part number N020 or A6101 in Owner's Manual.

Replacement friction disk. Fits all USI ARL and CSL/Classroom Series roll laminators except CSL/Classroom Series I. May be used as upper or lower. May be listed as part number 906B or A5104 in Owner's Manual.

Replacement heat guard for all USI ARL Series 18" roll laminators. May be listed as part number 512B or A4662 in Owner's Manual.

Replacement 18", 120V AC, 800 Watt heater cartridge for all USI ARL Series 18" roll laminators. May be listed as part number 517P or A4729 in Owner's Manual.

Replacement upper roller shaft. Fits all 18" ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A4659 in Owner's Manual.

Replacement complete feed table assembly for all USI ARL Series 12"> roll laminators. Includes feed table, guide and guide hardware. May be listed as part number 900C in Owner's Manual.

Replacement heat guard for all USI ARL Series 12"> roll laminators. May be listed as part number 512B or A4611 in Owner's Manual.