3 chamber EnduraGlide dry erase markers deliver strong, bold colors. They give you the ability to write in thick or thin lines with a versatile chisel tip. The see through ink gauge on the barrel shows you exactly how much ink is left. Available in packs of 4 and 12.

This is a durable and versatile eraser which wipes away dirt fast. Eraser can be clean with water after use.

Remove ink from your marker board in an instant with this super, non-toxic product. It is specially formulated to clean, condition and restore melamine and porcelain marker board surfaces.

Transparent PVC tube with 2-3/4" inside diameter. The moisture-proof tube comes with adjustable nylon web shoulder strap. Available in multiple colors and sizes.

Holds 12 rolls of 2-1/4" core media. Three rows of four pegs each 1-1/4" square and 11" high. 6" space between pegs. Powder-coated silver-vein finish. Heavy-duty 3" nylon casters with brakes make for easy moving and secure placement. Easy Assembly.

Mobile Rack for 2-1/4" Core Media (12 Rolls) - #8836

Holds 16 rolls of 3" core media. Four rows of four pegs each 2"> square and 11" high. 6" space between pegs. Powder-coated silver-vein finish. Heavy-duty 3" nylon casters with brakes make for easy moving and secure placement. Easy Assembly.

Mobile Rack for 3" Core Media (16 Rolls) - #8837

This Standard Laminator Cabinet is constructed of heavy-duty high-impact molded plastic which will not dent, chip, scratch or rust. It is designed to fit CSL or ARL Pro 2700 Heated Roll Laminator ARL Series roll laminators.
Features a locking cabinet and includes 3 outlet power strip with cord and 2 locking casters. Limited lifetime warranty. 27"H x 32" W x 24"D
Note: This product is not eligible for discounts.

Standard Laminator Cabinet/Cart - #9195

This functional, economical cart has an extra-large top to accommodate most laminators. The supply rack holds prints and the convenient film rack stores rolls of film up to 27" wide. Grey laminate tabletop and frame with 2" lockable casters. Supports up to 125 lbs. Assembly required. 42"W x 27"H x 26"D.

Lightweight Laminator Stand - #7448

Unique patented interlocking rail and drawer system that prevents shifting off the rails. Molded stops on the 3 smoke colored drawers prevent drawer from pushing through the back of cart. Unit has deep drawers (drawer dimensions 13 5⁄8"l x 9¾"w x 5"h) Each drawer can hold up to 3 lbs. Cart has four casters (two locking). Assembled dimensions 15 ½"d x 13"w x 26"h.

Replacement motor control PC board. Fits all ARL Series 120 Volt roll laminators equipped with variable speed motor. For classic/squared profile ARL roll laminators with serial numbers 9252-999 or lower see item 4764. May be listed as part number N020 or A6101 in Owner's Manual.

Replacement friction disk. Fits all USI ARL and CSL/Classroom Series roll laminators except CSL/Classroom Series I. May be used as upper or lower. May be listed as part number 906B or A5104 in Owner's Manual.

Replacement heat guard for all USI ARL Series 18" roll laminators. May be listed as part number 512B or A4662 in Owner's Manual.

Replacement 18", 120V AC, 800 Watt heater cartridge for all USI ARL Series 18" roll laminators. May be listed as part number 517P or A4729 in Owner's Manual.

Replacement upper roller shaft. Fits all 18" ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A4659 in Owner's Manual.

Replacement complete feed table assembly for all USI ARL Series 12"> roll laminators. Includes feed table, guide and guide hardware. May be listed as part number 900C in Owner's Manual.

Replacement heat guard for all USI ARL Series 12"> roll laminators. May be listed as part number 512B or A4611 in Owner's Manual.

Replacement upper roller shaft. Fits all 12"> ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A5728 in Owner's Manual.

Replacement lower roller shaft for 12"> USI ARL Series roll laminators. May be used as lower laminating (front) or pull (rear) roller. Note: may be used as lower laminating (front) only on machines equipped with manual reverse crank. May be listed as part number 102B or A5729 in Owner's Manual.

Replacement upper heat shoe for all 12"> USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 12"> ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement upper heat shoe for all 18" USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 18" USI ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not contain heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Heater assembly for USI 31" roll laminating machine. Equivalent part number: 800ELX

Replacement slitter blade for all MRL Series roll laminators. Note: blade only, see item 5119 for complete blade holder assembly.

Replacement feed table for MRL42 roll laminator. Note: does not include feed guide. See items 5851 and 3928 for feed guide and hardware.

Replacement upper 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement lower 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement core gripper for 2 1/4" supply mandrel. Fits CSL/Classroom Series II and MRL Series roll laminators. Note: does not include mounting hardware.

Replacement control knob for ARL and CSL/Classroom roll laminators. May be used as speed control knob on ARL Series machines equipped with variable speed motor, heat control knob on ARL Digital Series machines, or heat control knob on CSL/Classroom Series III and CSL/Classroom machines with new/round profile. May be listed as part number N021 or A5846 in Owner's Manual.

Replacement deep/extended feed guide for MRL42 roll laminator. Note: does not include mounting hardware, see item 3928 for mounting hardware.