Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available.Contains Box of 10 Boards

Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available. Available in boxes of 10 and 25.

The gold standard by which the professionals measure quality. USI's ProMount™ Ultra is simply the best - bar none. Individually hand crafted, each board is thoroughly inspected and signed by our skilled craftsmen to guarantee you are getting the ultimate in quality heat-activated mounting board. ProMount™ Ultra's 1/4" thick ultra-rigid foam board is made of high-density expanded polystyrene and double-thick clay-coated paper that is water resistant. Does not warp or bow when working with prints and wide-format graphics. Black. Additional sizes and colors also available.Contains Box of 10 Boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with cold adhesive. Available in boxes of 5 and 10.

MakerBot PLA Filament is a first-class filament optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.
 

Compatibility

MakerBot Natural PLA Filament is compatible with the MakerBot Replicator 2 and Earlier Models,MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is a set of filaments optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.

Compatibility

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is compatible with the MakerBot Replicator 2 and Earlier Models, MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) Available in Large and Small spools.

Replacement motor control PC board. Fits all ARL Series 120 Volt roll laminators equipped with variable speed motor. For classic/squared profile ARL roll laminators with serial numbers 9252-999 or lower see item 4764. May be listed as part number N020 or A6101 in Owner's Manual.

Replacement friction disk. Fits all USI ARL and CSL/Classroom Series roll laminators except CSL/Classroom Series I. May be used as upper or lower. May be listed as part number 906B or A5104 in Owner's Manual.

Replacement heat guard for all USI ARL Series 18" roll laminators. May be listed as part number 512B or A4662 in Owner's Manual.

Replacement 18", 120V AC, 800 Watt heater cartridge for all USI ARL Series 18" roll laminators. May be listed as part number 517P or A4729 in Owner's Manual.

Replacement upper roller shaft. Fits all 18" ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A4659 in Owner's Manual.

Replacement complete feed table assembly for all USI ARL Series 12"> roll laminators. Includes feed table, guide and guide hardware. May be listed as part number 900C in Owner's Manual.

Replacement heat guard for all USI ARL Series 12"> roll laminators. May be listed as part number 512B or A4611 in Owner's Manual.

Replacement upper roller shaft. Fits all 12"> ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A5728 in Owner's Manual.

Replacement lower roller shaft for 12"> USI ARL Series roll laminators. May be used as lower laminating (front) or pull (rear) roller. Note: may be used as lower laminating (front) only on machines equipped with manual reverse crank. May be listed as part number 102B or A5729 in Owner's Manual.

Replacement upper heat shoe for all 12"> USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 12"> ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement upper heat shoe for all 18" USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 18" USI ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not contain heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Heater assembly for USI 31" roll laminating machine. Equivalent part number: 800ELX

Replacement slitter blade for all MRL Series roll laminators. Note: blade only, see item 5119 for complete blade holder assembly.

Replacement feed table for MRL42 roll laminator. Note: does not include feed guide. See items 5851 and 3928 for feed guide and hardware.

Replacement upper 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement lower 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement core gripper for 2 1/4" supply mandrel. Fits CSL/Classroom Series II and MRL Series roll laminators. Note: does not include mounting hardware.

Replacement control knob for ARL and CSL/Classroom roll laminators. May be used as speed control knob on ARL Series machines equipped with variable speed motor, heat control knob on ARL Digital Series machines, or heat control knob on CSL/Classroom Series III and CSL/Classroom machines with new/round profile. May be listed as part number N021 or A5846 in Owner's Manual.

Replacement deep/extended feed guide for MRL42 roll laminator. Note: does not include mounting hardware, see item 3928 for mounting hardware.

Shipping carton with foam inserts and pallet for MRL42 roll laminator.

Key lock kit for all classic/squared profile ARL Series roll laminators. Includes grey left side housing with key lock installed.

Shipping carton with foam inserts for USI CSL/Classroom 27 Series II or MiniKote roll laminators.