A variety of base options are available to display your Sail Sign. Cross Base for indoor and short-term outdoor use. Recommend using round water ballast (SAB03) for added stability.

A variety of base options are available to display your Sail Sign. Vehicle Base allows you to display Sail Sign next to a vehicle.

A variety of base options are available to display your Sail Sign. Heavy-Duty Cross Base for indoor and short-term outdoor use. Recommend using square water ballast (SAB04) for added stability.

Kit Includes: Either a Spike or Cross Base, Banner Hardware and Printed Banner. Dye sublimated banner Tear Drop Sail Sign. Printed on knit flag polyester, front correct - back reverse. Available in Single and Double Sided. You suppy the print ready art file and we print it.

Kit Includes: Either a Spike or Cross Base, Banner Hardware and Printed Banner. Dye sublimated banner Razor Sail Sign. Printed on knit flag polyester, front correct - back reverse. Available in Single and Double Sided. You suppy the print ready art file and we print it.

Replacement Graphic ONLY - Custom Printed Banner for the Tear Drop Sail Sign. Printed on knit flag polyester, front correct - back reverse. You suppy the print ready art file and we print it.

Replacement Graphic ONLY - Custom Printed Banner for the Razor Sail Sign. Printed on knit flag polyester, front correct - back reverse. You suppy the print ready art file and we print it.

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 4 mm thick white corrugated plastic board
• Permanent short term outdoor adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white foam board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per box

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white gator board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB

Each white foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Gloss finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Satin Finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Luster (matte) finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

A variety of base options are available to display your Sail Sign. Use with Cross Base (SAB02) for indoor and short-term outdoor use.

A variety of base options are available to display your Sail Sign. Use with Heavy-Duty Cross Base (SAB06) for indoor and short-term outdoor use.