This is our largest outdoor display!  Adjusts up to 17 feet high! Get your message noticed with a custom full color digitally printed flag. You supply the art, we print it. Full color flag (42" x 120" viewable size) printed on polyester fabric. Double-folded & double-stitched hems and finished with #2 grommets for the Giant Outdoor Flag Display (included). Available in Single and Double sided.

Need to capture attention for an upcoming event, indoors or outdoors? We have the solution! A custom full color digitally printed banner. You supply the art, we print it and ship it. Banner is single side printed on our 13-oz semi-gloss vinyl. The first dimension is the height and the second is the width. Banner is finished with double-folded & double-stitched hems with grommets and 1/4" polypropylene rope.

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner double-side printed on our 18-oz opaque vinyl and formatted for the Versatile Boulevard Bracket. Finished with stitched pole pockets and grommet top and bottom.

Note: Stand is not included in this price.

A custom full color digitally printed flag is a great attention getter and can be used inside or outside. You supply the art, we print it and ship it. Flag is single side printed on dacron (front side correct - back side reverse). The first dimension is the height and the second is the width. Flag is finished with double-stitched hems with canvas leader and grommets.

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner printed on our 10-oz semi-gloss vinyl and formatted for the Versatile Series Banner Stands (SKUs 8787, 8826, & 8827). 24" x 71" viewable size, finished with stitched pole pockets top and bottom. Stand not included.

Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

Accepts light and medium weight materials. Self-sharpening blade assures consistent cutting quality. Features see through clamp, adjustable backstop and metal base. Available in several sizes:

• 20 1/8"
• 28 1/4"
• 37 1/2"
• 37 1/2" With Stand
• 51"
• 51 1/8" With Stand

Self-sharpening blade cuts in both directions. Grid surface will not chip or scratch. Easily cuts light- to medium-weight paper material up to 8 sheets thick of standard 20# stock.  Can cut medium-thickness laminates made with up to 3 mil thick films. Features metal base with preprinted guides. Available in 12" & 18".

Dahle's Premium Rolling Trimmers are designed for heavy duty applications where precision is essential. Whether you are cutting mat board or a single sheet of paper, you can expect to receive the same burr free cut each and every time. This cutting capacity is made possible by a thick walled square aluminum guide rod which provides maximum strength with minimal side movement of the cutting head. Available in several sizes:

• 20 1/8"
• 26 3/8"
• 36 1/4"
• 36 1/8" With Stand
• 51 1/8"
• 51" With Stand

Heavy duty tabletop trimmer cuts through everything from cardboard, mount board and 1/16" hardboard to film, paper and dry-mount tissue. The housing fits the hand comfortably, enclosing the self-sharpening steel rotary blade to avoid accidents. Double steel-tube suspension makes for ease of use. (Trimmer only. Stand not included.) Available in several sizes:

• 18"
• 24"
• 30"
• 36"
• 42"
• 54"

"Ergonomic power grip cutting head designed for right or left-handed push or pull cutting
Convenient built-in handle for increased portability
Switch from cutter to trimmer in a matter of seconds
Cut And Trim On The Same Machine
"

The Titan is a unique bench top cutting and trimming machine. Designed to cut a wide variety of rigid material and trim a wide range of flexible material. The Titan's one piece aluminum base and robust rail assembly incorporates both a blade cutting track for rigid material up to ½" thick and trimming base for roll stock flexible materials. The Titan delivers efficiency, accuracy and the added value of knife cutting and trimming on the same unit. It can be used to cut foam board, corrugated plastic and PVC as well as trim Films, Laminates, Banners, Fabrics, Textiles and Magnetic Sheeting. Adapts to optional Stand with waste catcher, roll holder and locking wheels and optional squaring arm (sold seperately). Includes 100 blades (#5624).

Cut a variety of semi-rigid/flexible materials with the new and affordable F-60 Cutter from Fletcher-Terry. Cuts foamboard, canvas, cardboard, matboard and a variety of other digital media up to 60" in length. Best of all you have the option to use the F-60 as a table top or wall mount trimmer. Unit features a plastic knife blade cartridge (see insert) for quick and safe blade changes, as well as a “lock & cut"> feature where the cutting head lowers and locks during the cutting process.

Perfect for signmakers, designers and crafters, this mat protects both table tops and the sharpness of knife blades. Features translucent non-glare 5/32"-thick surface with an imprinted grid undermat to better align projects for straighter cuts.