Secured reinforcement for hanging or mounted artwork, signs, and more whether indoors or out. Includes grommet die, cutting punch, cutting board, 3 dozen grommets and washers. #2 Grommet with 3/8" inner diameter.

This heavy-duty machine punches the hole and sets the grommet simultaneously. Cuts laminates, foam board, plastics and more. Machine and Die included. Grommet Die #2. Inner Diameter: 1/4" Outer Diameter: 9/16" . Available in Red and Blue.

For Grommet Kit #5455.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Brass Finish. Also available in nickel finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8" Machine not included. Brass finish.

Pierce materials up to 6mm (1/4") thick without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Brass finish.

Pierce materials without pre-punching a hole. Simply place grommet on the top die and the washer on the bottom die, position work, then pierce and set in 1 motion. Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Available in black, brass & Nickel finishes.

Pink rhinestone lanyard on black lanyard material with lobster claw

Pink ribbon 3/8" (10 mm) lanyard w/ nickel-plated steel swivel hook. Support a cause w/ these unique lanyards. 36" (914 mm) cut length prior to assembly.

3 chamber EnduraGlide dry erase markers deliver strong, bold colors. They give you the ability to write in thick or thin lines with a versatile chisel tip. The see through ink gauge on the barrel shows you exactly how much ink is left. Available in packs of 4 and 12.

This is a durable and versatile eraser which wipes away dirt fast. Eraser can be clean with water after use.

Remove ink from your marker board in an instant with this super, non-toxic product. It is specially formulated to clean, condition and restore melamine and porcelain marker board surfaces.

Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Other die sizes available.

Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Other die sizes available.

Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8"> Machine not included. Other die sizes available.

Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8"> Machine not included. Other die sizes available.

This fits the Lassco Desktop Corner Rounder machine. This is for the Die only. Availabe in 4 sizes, 1/8", 14", 3/8" and 1/2".

Handles paper and plastic products up to 1/2" thick. Sear action cutting. Set includes cutter and die. Available with 4 size dies, 1/8", 14", 3/8" and 1/2".

Top load (on long side) heavy duty vinyl with 2-hole badge clip. Maximum insert size: 2-1/4" x 3-3/8" (data/credit card size)

Top load (on short side) heavy duty vinyl with 2-hole badge clip. Maximum insert size: 2-1/4" x 3-3/8" (data/credit card size)

Top load (on long side) heavy duty vinyl with 5/8" slot and two 5/16" holes. Maximum insert size: 2-1/4" x 3-3/8" (data/credit card size)

Top load (on short side) heavy duty vinyl with 5/8" slot and two 5/16" holes. Maximum insert size: 2-1/4" x 3-3/8" (data/credit card size)

Metal alligator clip riveted to the end of a flexible vinyl or rugged Mylar strap. 100/Box

Adhesive backing securely attaches to ID badges without pre-cut slots. Available in Square, Rectangular, Pin and Aligator Clips.

Metal alligator clip riveted to the end of a flexible vinyl or rugged Mylar strap.

Strap cannot be pulled apart. Detach by cutting with scissors. Clear. (50/Box)

Indestructible 6" airline-safe loops secure tags to luggage.

Strong, durable and won't harm fabric. 30" long. Available in Solid Brass, Nickel Plated Steel and Aluminum.

Lightweight and Comfortable tubular strap has breakaway connector designed to release when tension becomes too great. Available in 30". Clear in color.