Operations manual for ARL1800 and 2700 Digital model roll laminators with new/rounded profile. Serial numbers: ARL2700 0602-0001 to 0905-0950; ARL1800 all.

Operations manual for CSL/Classroom 2700 roll laminating machine with new/rounded profile. Serial numbers: Blue 0602-0001 to 0805-0871; Green 0602-0001 to 0705-0878; Purple 0702-0001 to 0605-0743.

Operations manual for ARL2700 Digital model roll laminators with new/rounded profile. Serial numbers 40001-0708 and up or 50001-0708 and up.

Operations manual for CSL/Classroom 2700 model roll laminators with new/rounded profile. Serial numbers 90001-0708 and up; 00001-0708 and up; or 10001-0708 and up.

Operations manual for ClearTek2700 Digital model roll laminators with new/rounded profile. Serial numbers WO665-0708 and up or GO909-0708 and up.

Operations manual for classic/squared profile Digital ARL and CSL/Classroom Series III roll laminating machines.

Operations manual for classic/squared profile ARL and CSL/Classroom Series II laminator.

Shipping carton with foam inserts for classic/squared profile ARL 18" roll laminating machine; machine skus #0013, #7544, or #6217. Note: for new/rounded profile ARL1800 machines built 2002 or later, please use item #0612.

Replacement motor drive switch for MRL Series roll laminators.

Replacement "snap-in" style heat power switch. Fits all USI ARL and CSL/Classroom Series roll laminators with new/rounded profile. Switch and bezel only, does not include wires. See item 3933 for replacement wire. May be listed as part number A5510 in Owner's Manual.

Replacement "snap-in" style motor drive switch. Fits all USI ARL roll laminators with new/rounded profile, and CSL/Classroom Series machines with the following serial number sequences: 0****-****, 1****-****, or 9****-****. Switch and bezel only, does not include wires. May be listed as part number A5511 in Owner's Manual

Replacement blue right side housing for CRL40 roll laminator. Does not include mounting screws.

Replacement blue left side housing for CRL40 roll laminator. Does not include mounting screws.

Replacement keylock switch for USI ARL roll laminating machine. Keys are included. May be listed as part number A5533 in Owner's Manual.

Replacement gray left side housing for classic/squared profile USI ARL roll laminating machines. Has hole for keylock for machines so equipped; keylock not included. May be listed as part number 703B in Owner's Manual. Note: for side housing for machines without a keylock, see part number 3914.

Heater element for CRL40 roll laminating machine.

Replacement top friction stud. Fits all ARL & CSL/Classroom Series II, III and 2700 roll laminating machines. May be listed as part number 902B or A0970RD in Owner's Manual.

Replacement bottom friction stud. Fits all ARL & CSL/Classroom Series II, III and 2700 roll laminating machines. May be listed as part number 902B or A0970BU in Owner's Manual.

Replacement heater cartridge for MRL42 roll laminator. Note: single heater cartridge only.

Replacement temperature sensing thermal couple for MRL42 roll laminator. Note: may be used as upper or lower.

Shipping carton with foam inserts for ARL1800 roll laminator with new/rounded profile; machines skus #7762 or #7763. Note: for classic /squared profile ARL 18" roll laminating machines, please use item #0048.

Shipping carton with foam inserts for ARL2700 or CSL/Classroom 2700 roll laminator new/rounded profile; machine skus #7759, #7760, #7761, #7764 or #7765. Note: for classic/square profile ARL27" or CSL/Classroom 27" roll laminating machines, please use item #1813.
 

Replacement motor noise suppression capacitor for MRL Series roll laminators.

Replacement temperature display PC board for MRL42 roll laminator equipped with LCD display. Note: if retrofitting to machine originally equipped with LED temperature display PC board, the main heat control PC board must also be replaced to be LCD compatible, see item 0651.

Replacement temperature display bezel/lens for all MRL42 roll laminators equipped with LCD temperature display PC board. Includes one bezel and one lens.

Replacement thermal cut-off for MRL42 roll laminator. May be used in upper or lower heat shoe.

Replacement motor control PC board for MRL series roll laminators. PC board only, does not include noise suppression capacitor; see item 0616 for capacitor.

Replacement double pole main power switch for MRL Series roll laminators.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "round" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "square" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.