Create stickers or self-adhesive signs and posters in seconds with this dual adhesive film. One side permanently adheres to the back of print while the other features a pressure-sensitive adhesive covered by a release liner.

This dual-adhesive film features low-melt DigiSeal® adhesive on one side and a permanent pressure-sensitive adhesive with release liner on the other side. The pressure-sensitive backing is aggressive enough to adhere to most substrates.

Optically clear mounting adhesive. Features double release liner with permanent adhesive on both sides. Great for applications requiring see-through graphics

"Premium general purpose white mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.
"

Two-sided white adhesive designed for applications that require mounting to thin media. The opaque backing diminishes the effect of light as it shows through the finished piece leaving a smooth and polished print. Excellent for back lit applications and materials that are especially sensitive to heat.

Premium pressure-sensitive adhesive suitable for image decal and high-volume mounting applications, including pre-coated mounting boards. Also ideal for mounting prints to smooth porous substrates such as foam boards, cardstock, and tempered hardboard. Provides a strong permanent bond and can be used in all your applications. Aqueous acrylic adhesive on both sides of a clear polyester 0.5mil carrier and single release paper. The new non-slip release liner allows pre-coated boards to stack safely without slippage. Also available in a variety of widths and lengths.

Premium general purpose clear mounting film. Features single release liner. Two-sided high peel adhesive with a good tack. Water-based acrylic adhesive.

Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available.Contains Box of 10 Boards

Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available. Available in boxes of 10 and 25.

The gold standard by which the professionals measure quality. USI's ProMount™ Ultra is simply the best - bar none. Individually hand crafted, each board is thoroughly inspected and signed by our skilled craftsmen to guarantee you are getting the ultimate in quality heat-activated mounting board. ProMount™ Ultra's 1/4" thick ultra-rigid foam board is made of high-density expanded polystyrene and double-thick clay-coated paper that is water resistant. Does not warp or bow when working with prints and wide-format graphics. Black. Additional sizes and colors also available.Contains Box of 10 Boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with cold adhesive. Available in boxes of 5 and 10.

Sponge Overlay required for smooth even lamination. Moderately reflective finish enhances colors while reducing glare for clear, easy viewing. Available in Gloss & Satin Matte

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.