Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

This is our largest outdoor display!  Adjusts up to 17 feet high! Get your message noticed with a custom full color digitally printed flag. You supply the art, we print it. Full color flag (42" x 120" viewable size) printed on polyester fabric. Double-folded & double-stitched hems and finished with #2 grommets for the Giant Outdoor Flag Display (included). Available in Single and Double sided.

Need to capture attention for an upcoming event, indoors or outdoors? We have the solution! A custom full color digitally printed banner. You supply the art, we print it and ship it. Banner is single side printed on our 13-oz semi-gloss vinyl. The first dimension is the height and the second is the width. Banner is finished with double-folded & double-stitched hems with grommets and 1/4" polypropylene rope.

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner double-side printed on our 18-oz opaque vinyl and formatted for the Versatile Boulevard Bracket. Finished with stitched pole pockets and grommet top and bottom.

Note: Stand is not included in this price.

A custom full color digitally printed flag is a great attention getter and can be used inside or outside. You supply the art, we print it and ship it. Flag is single side printed on dacron (front side correct - back side reverse). The first dimension is the height and the second is the width. Flag is finished with double-stitched hems with canvas leader and grommets.

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner printed on our 10-oz semi-gloss vinyl and formatted for the Versatile Series Banner Stands (SKUs 8787, 8826, & 8827). 24" x 71" viewable size, finished with stitched pole pockets top and bottom. Stand not included.

MakerBot PLA Filament is a first-class filament optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.
 

Compatibility

MakerBot Natural PLA Filament is compatible with the MakerBot Replicator 2 and Earlier Models,MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is a set of filaments optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.

Compatibility

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is compatible with the MakerBot Replicator 2 and Earlier Models, MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) Available in Large and Small spools.

Modular squaring arm assembly that can be added to any Fletcher Terry Titan Substrate Trimmer.

Wall Mount For item 9344

Clamping bar for Dahle rotary (rolling) trimmer Model 558 #5430 50"

Clamping bar for Dahle rotary (rolling) trimmer Model 556 #5429 37-1/2"

Black blade assembly for 12 inch and 18 inch new style (square glide bar) Dahle hobby trimmer. Also available in Gray #0751. For old style trimmer (round glide bar) use part #5738.

Clamping bar for 12 inch new style (square glide bar) Dahle hobby trimmer. For old style trimmer (round glide bar) use part #5743.

Clamping bar for 18 inch new style (square glide bar) Dahle hobby trimmer. For old style trimmer (round glide bar) use part #5773.

For use in Dahle rotary (rolling) trimmers Models 551, 553, 555, 557, 559. Blade only. For blade assembly use item #6610 or #6609.

Blade assembly for 12 inch and 18 inch old style (round glide bar) Dahle hobby trimmer. For new style trimmer (square glide bar) use part #0703.

Clamping bar for 12 inch old style (round glide bar) Dahle hobby trimmer. For new style trimmer (square glide bar) use part #0709.

Clamping bar for Dahle rotary (rolling) trimmer Model 554 #0936 28-1/4"

Rotary blade assembly for Dahle rotary (rolling) trimmers Model 556 = #5429 37-1/2"> or Model 558 = #5430 50">

Rotary blade assembly for Dahle rotary (rolling) trimmers Model 552 = #5350 20-1/8"> or Model 554 = #0936 28-1/4"

Clamping bar for Dahle rotary (rolling) trimmer Model 552 #5350 20-1/8"> Non-stock item - Allow 1-2 week lead time. Please confirm base length of trimmer 25-3/4" = older 18-1/4&quot model; 27-3/4" = newer 20-1/8"> model.

MAXIMIZE OUTPUT. MINIMIZE TOLERANCE.
• VECT 65 Thermal Regulation gives you 2X the dimensional accuracy in real polymers and composites.
• Print continuously for hours, days, or weeks, thanks to METHOD’s unmatched industrial build quality.
• Configurable to meet your needs, METHOD’s compact footprint allows for desktop, benchtop, and racked setups.
EASILY PROTOTYPE IN THE SAME MATERIAL AS YOUR PRODUCTION PARTS
• Sure we’ve got PLA, but we’ve also got PETG, Nylon, Nylon Carbon Fiber – and they all print beautifully.
• Plug in the LABS GEN 2 Experimental Extruder for unbridled 3rd party material printing.
• ClimateSeal™ Filament Bays protect materials from the elements bag to print with pristine quality.
• 4-in-1 Modular Performance Extruders allow for quick change between material groups, preventing cross-contamination.
JUST PRINT.
• 5” capacitive touchscreen provides an intuitive step-by-step setup and real-time controls on your jobs.
• SmartAssist™ Material Loading makes material changing a breeze from material bay to extruder, hands-free.
• MakerBot CloudPrint™ Software brings intuitive printing for even the toughest jobs.
• Safely Print anywhere with Greenguard-certified MakerBot Clean Air™ Smart Filtration System.
• MakerCare Live Training will take you seamlessly from unboxing to advanced printing

Features
• Dual Performance Extruders
• Dry-sealed material bays
• Wifi Connectivity and 21 on-board sensors
• Remote Monitoring & Printing
• 25 compatible CAD file types
• 5" Full-color capacitive touch screen
• Over 300,000 hours of reliability testing

Includes
• 1 MakerBot METHOD 3D Printer
• 1 Spring Steel Build Plate
• 1 Performance Extruder 1 Model (Version 1)
• 1 Performance Extruder 2 Support (Version 1)
• 1 Nozzle Brush
• 1 Hex Key
• 1 USB A-to-B Cable
• 1 US Power Cord
• 1 EU Power Cord

The Support 2A Performance Extruder is optimized for printing with soluble support material such as MakerBot Precision PVA. Features • Smart sensors for material management and print protection • Greater torque with a 19:1 dual-drive gear ratio • Lengthened thermal core with less than 60-second heat up time • Quick-release locking extruder mount for high stability printing and easy swapability • 1-year expected lifetime based on typical usage (Typical usage is estimated at 1,500 hours of printing for the Support 2 Performance Extruder)

The Performance Extruder for Method is built for high-speed printing without compromising part accuracy. The Model 1 Performance Extruder is optimized for printing with model materials such as MakerBot Precision PLA and MakerBot Precision Tough. Features • Smart sensors for material management and print protection • Greater torque with a 19:1 dual-drive gear ratio • Lengthened thermal core with less than 60-second heat up time • Quick-release locking extruder mount for high stability printing and easy swapability • 1-year expected lifetime based on typical usage (Typical usage is estimated at 800 hours of printing for the Model 1 Performance Extruder)