USI Laminate offers precision crafted clear push pins in a tub of 200. They have a .375" hardened steel point and the heads are .5" in length and .25" in diameter.

Pack of 4, 50-count 3"x3" yellow stick-on notes. Total of 200 notes.

Pack of 144 pencils. Budget #2 pencils with eraser top.

For 3M models 1711, 1720, 1730, 1740, 1760, 1780, 1810, 1820, 1830, 1840, 1850, 1860, 1870, 1880, 9050, 9060, 9070, 9080, 9100, as well as the 900 Series, 213, 300, 400 series, 2770T, and other brands specifying this lamp.

For 3M 2000AG and 2000GT as well as other brands specifying this lamp.

For Highland 1610 overhead projector as well as other brands specifying this lamp.

3 chamber EnduraGlide dry erase markers deliver strong, bold colors. They give you the ability to write in thick or thin lines with a versatile chisel tip. The see through ink gauge on the barrel shows you exactly how much ink is left. Available in packs of 4 and 12.

This is a durable and versatile eraser which wipes away dirt fast. Eraser can be clean with water after use.

Remove ink from your marker board in an instant with this super, non-toxic product. It is specially formulated to clean, condition and restore melamine and porcelain marker board surfaces.

These 4 Steel Dowels are 24" in length and are meant to be used with items 8826, 8827, 8787 USI's versatile banner displays.

Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

Economical and long lasting, Made of rustproof steel, these sign holders display corrugated plastic signboards. Available in 3 sizes, Step Stake, Handheld and Tabletop.

• Step Take 10"W x 30"H
• Handheld measure 1-3/4"W x 28"H
• Tabletop measure 8"W x 3"H (base).

The easel that goes anywhere. Lightweight, black steel design sets up in seconds and can support up to 5 lbs. Conveniently folds down to fit into briefcase. Available in Tabletop (14" tall) and Full Height (63" tall).

Ideal for painting, sketching, and commercial display. Lightweight and portable, folds easily to a compact 36" closed size. Durable aluminum construction features ¾"> diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a central cross brace for extra rigidity and height adjustable lower canvas support brackets. Holds canvas from 3" to 33" in height and 1" thick.

This fits the Lassco Desktop Corner Rounder machine. This is for the Die only. Availabe in 4 sizes, 1/8", 14", 3/8" and 1/2".

Turn a desktop printer into an instant business-card maker. This manual machine quickly and easily cuts pre-printed 8-1/2" x 11" sheets of business-card stock, creating 60 cards in 60 seconds. Lightweight and economical.

Handles paper and plastic products up to 1/2" thick. Sear action cutting. Set includes cutter and die. Available with 4 size dies, 1/8", 14", 3/8" and 1/2".

Fits all Brother P-Touch Systems. Resistant to most chemicals, water, abrasion and temperatures from -50º to 200ºF. Each cartridge contains 26' of tape for indoor or outdoor use.

For Intimus Model 302 shredders.

For Intimus Model 502 shredders.

Ideal for signage, presentation, and commercial display. Lightweight and portable, it folds easily to a compact 36" closed size. Durable aluminum construction features 3/4" diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a 24" long, springloaded top clamp to securely hold signs, pads, and posters up to 3/4" thick, a central cross brace for extra rigidity, and height adjustable lower canvas support brackets. Materials up to 30" high can fit between the lower support brackets and top clamp.

These powder coated steel feet are ideal for standing up either single or double-sided rigid substrates. Simply slide your board or other substrate into the opening and instantly you have a stand up display. Great for trade shows or marketing displays.

Sold in eaches. Available in 1/4" and 1/2".

Dowels can be used where a strong rod is needed such as for a banner. This wood dowel from USI Laminate is best used with pocketed banners. Available in 2' and 3'. Also available in 1/2" diameter. 4/pk.

The highest tack two-sided banner tape available on the market. Makes banner finishing easy.

Single-sided tape for hemming banners. Use to create a super strong banner, no need to sew hems.