Handle cover / axle sleeve for USI Combo Plastic and Wire Binding Machine (#3629). Metallic cylinder with square cut out.

Paper stop for all Renz office binding machines.

Handle assembly for Manual Punch and Bind Machine (#0144). For newer style machines where handle is mounted on side. Beige.

Right cover plate for Manual Punch and Bind Machine (#0144). Cream. Non-stock item. Please allow additional time for processing.

Right cover plate for Manual Punch and Bind Machine (#0144). Brown. Non-stock item. Please allow additional time for processing.

Back cover plate for Manual Punch and Bind Machine (#0144). Non-stock item. Please allow additional time for processing.

Handle assembly for Manual Punch and Bind Machine (#0144). For old style machines where handle is mounted in slot. Handle includes screw. Beige. Non-stock item. Please allow additional time for processing.

Paper guide for Manual Punch and Bind Machine (#0144). Non-stock item. Please allow additional time for processing.

Spring for Manual Punch and Bind Machine (#0144). Non-stock item. Please allow additional time for processing.

Operations manual for ClearTek2700 Digital model roll laminators with new/rounded profile. Serial numbers WO665-0708 and up or GO909-0708 and up.

Power cord for FX400 or FX1200 pouch laminating machine.

Harness assembly includes motor, heater and line cord for use with PL400 and PL900 pouch laminating machines only.

Side plate for use with PL400 and PL900 pouch laminating machines. Not to be used with PL4, PL10, or PL12 pouch laminating machines.

XL1200 Pouch Laminator Gear Side Plate with five 1/4" push nuts.

XL1200 Pouch Laminator Motor Side Plate

XL1200 Pouch Laminator Heater Assembly

Replacement motor drive switch for MRL Series roll laminators.

Replacement blue right side housing for CRL40 roll laminator. Does not include mounting screws.

Replacement blue left side housing for CRL40 roll laminator. Does not include mounting screws.

Heater element for CRL40 roll laminating machine.

Replacement heater cartridge for MRL42 roll laminator. Note: single heater cartridge only.

Replacement temperature sensing thermal couple for MRL42 roll laminator. Note: may be used as upper or lower.

Replacement motor noise suppression capacitor for MRL Series roll laminators.

Replacement temperature display PC board for MRL42 roll laminator equipped with LCD display. Note: if retrofitting to machine originally equipped with LED temperature display PC board, the main heat control PC board must also be replaced to be LCD compatible, see item 0651.

Replacement temperature display bezel/lens for all MRL42 roll laminators equipped with LCD temperature display PC board. Includes one bezel and one lens.

Replacement thermal cut-off for MRL42 roll laminator. May be used in upper or lower heat shoe.

Replacement motor control PC board for MRL series roll laminators. PC board only, does not include noise suppression capacitor; see item 0616 for capacitor.

Replacement double pole main power switch for MRL Series roll laminators.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "round" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.

Replacement supply mandrel end cap for 2 1/4 supply mandrel; "square" end. Fits CSL/Classroom Series II roll laminators and MRL42 waste rewind mandrel.