Replacement upper 1" diameter supply mandrel for all 18" ARL roll laminating machines. May be listed as part number 907B or A4577 in Owner's Manual.

Lighted heat switch for all USI ARL classic/squared profile roll laminating machines equipped with variable speed motor. Switch wires not included; if switch wires are required see item number 3933.

Replacement lower 1" diameter supply mandrel for all 18" ARL roll laminating machines. May be listed as part number 907B or A4578 in Owner's Manual.

Replacement upper 1" diameter supply mandrel for all 25" ARL Series and 25" CSL/Classroom Series II and III roll laminating machines. May be listed as part number 907B or A4575 in Owner's Manual.

Replacement lower 1" diameter supply mandrel for all 25" ARL Series and 25" CSL/Classroom Series II and III roll laminating machines. May be listed as part number 907B or A4576 in Owner's Manual.

Complete replacement feed table assembly including feed table and feed guide with knob, screw and washer. Fits USI 25" ARL and CSL/Classroom Series II and III roll laminating machines. May be listed as part number 900C in Owner's Manual.

Complete replacement feed table assembly including feed table and feed guide with knob, screw and washer. Fits USI 18" ARL laminating machines. May be listed as part number 900C in Owner's Manual.

Variable speed 90VDC gearmotor for USI ARL Series roll laminating machines. May be listed as part number 300PVSR or A3225 in Owner's Manual. Does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, W****-****, or machines with serial numbers beginning with ">H.">

Replacement idler roller for all 12"> ARL laminating machines; may be used as upper or lower. Note: does not include dowel pins or nylon idler washers. May be listed as part number 013B in Owner's Manual.

Replacement idler roller dowel pin for USI ARL and CSL/Classroom Series roll laminating machines. Does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number 014A or A4552 in Owner's Manual.

Replacement idler roller for 25" ARL and CSL/Classroom Series I, II, and III laminating machines, may be used as upper or lower. Note: does not include dowel pins or nylon idler washers. May be listed as part number 013B in Owner's Manual.

Replacement 23 tooth motor drive output sprocket for machines equipped with footage counter. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. May be listed as part number 301P or A3874 in Owner's Manual.

Replacement 19 tooth pull roll sprocket for roll laminators. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. May be listed as part number 303P or A3876 in Owner's Manual.

Replacement pressure adjustment plate for all classic/squared profile USI ARL and CSL/Classroom Series III roll laminating machines. May be listed as part number 400B in Owner's Manual.

Replacement pressure adjustment bracket for all ARL and CSL/Classroom series roll laminators except CSL/Classroom Series I and does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, W****-****, or machines with with serial numbers beginning with ">H."> May be listed as part number 401B or A3881 in Owner's Manual.

Replacement pressure adjustment spring. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. May be listed as part number 402P or A3882 in Owner's Manual.

Replacement pressure adjustment screw for all ARL and CSL/Classroom series roll laminators except CSL/Classroom Series I and does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, W****-****, or machines with with serial numbers beginning with ">H."> May be listed as part number 403B or A3883 in Owner's Manual.

Replacement upper roller bushing. Fits all ARL and CSL/Classroom Series roll laminating machines except ARL4000, ARL4000Pro, and CSL/Classroom Series I. Note: only use as upper pull roller bushing on ARLPro2700. May be listed as part number 404B or A3884 in Owner's Manual.

Replacement lower roller bushing. Fits all ARL and CSL/Classroom Series roll laminating machines except ARL4000, ARL4000Pro, and CSL/Classroom Series I. Note: only use as lower pull roller bushing on ARLPro2700. May be listed as part number 405B or A3885 in Owner's Manual.

Replacement heat shoe mounting bracket. Fits all ARL and CSL/Classroom Series roll laminating machines except ARL4000, and CSL/Classroom Series I. May be listed as part number 505B or A3886 in Owner's Manual.

Replacement upper heat shoe spacer for all ARL and CSL/Classroom 25" and 27" heat shoe roll laminators except CSL/Classroom Series I and ARL4000. May be listed as part number 507P or A3887 in Owner's Manual.

Replacement lower heat shoe spacer for all ARL and CSL/Classroom 25" and 27" heat shoe roll laminators except CSL/Classroom Series I and ARL4000. May be listed as part number 506P or A3888 in Owner's Manual.

Replacement heat guard for all 25" ARL and CSL/Classroom Series II, and III laminating machines. May be listed as part number 512B in Owner's Manual.

Replacement lower heat shoe for all 25" ARL and CSL/Classroom Series II laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement base channel/foot bracket. Fits all ARL classic/squared profile machines except Digital. Fits CSL/Classroom Series II and gray Series III machines. Fits all new/round profile ARL and CSL/Classroom machines except machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, W****-****, or machines with with serial numbers beginning with ">H."> May be listed as part number 602B or A9905 in Owner's Manual.

Replacement base channel. Fits all ARL classic/squared profile roll laminators except Digital. May be listed as part number 607C in Owner's Manual.

Replacement tinnerman bracket. Fits all ARL and CSL/Classroom series roll laminators except CSL/Classroom Series I and does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number 609P or A4503 in Owner's Manual.

Replacement reinforcing bar for all 25" ARL and CSL/Classroom Series laminating machines. Does not include mounting hardware. May be listed as part number 616B in Owner's Manual.

Replacement left feed guide. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. Does not include mounting hardware. May be listed as part number701C or A3899 in Owner's Manual.

Replacement motor housing. Fits all 25" ARL and CSL/Classroom Series II and III roll laminators. May be listed as part number 702C in Owner's Manual.