Replacement motor control PC board. Fits all ARL Series 120 Volt roll laminators equipped with variable speed motor. For classic/squared profile ARL roll laminators with serial numbers 9252-999 or lower see item 4764. May be listed as part number N020 or A6101 in Owner's Manual.

Replacement friction disk. Fits all USI ARL and CSL/Classroom Series roll laminators except CSL/Classroom Series I. May be used as upper or lower. May be listed as part number 906B or A5104 in Owner's Manual.

Replacement heat guard for all USI ARL Series 18" roll laminators. May be listed as part number 512B or A4662 in Owner's Manual.

Replacement 18", 120V AC, 800 Watt heater cartridge for all USI ARL Series 18" roll laminators. May be listed as part number 517P or A4729 in Owner's Manual.

Replacement upper roller shaft. Fits all 18" ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A4659 in Owner's Manual.

Replacement complete feed table assembly for all USI ARL Series 12"> roll laminators. Includes feed table, guide and guide hardware. May be listed as part number 900C in Owner's Manual.

Replacement heat guard for all USI ARL Series 12"> roll laminators. May be listed as part number 512B or A4611 in Owner's Manual.

Replacement upper roller shaft. Fits all 12"> ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A5728 in Owner's Manual.

Replacement lower roller shaft for 12"> USI ARL Series roll laminators. May be used as lower laminating (front) or pull (rear) roller. Note: may be used as lower laminating (front) only on machines equipped with manual reverse crank. May be listed as part number 102B or A5729 in Owner's Manual.

Replacement upper heat shoe for all 12"> USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 12"> ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement upper heat shoe for all 18" USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 18" USI ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not contain heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Heater assembly for USI 31" roll laminating machine. Equivalent part number: 800ELX

Replacement slitter blade for all MRL Series roll laminators. Note: blade only, see item 5119 for complete blade holder assembly.

Replacement feed table for MRL42 roll laminator. Note: does not include feed guide. See items 5851 and 3928 for feed guide and hardware.

Replacement upper 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement lower 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement core gripper for 2 1/4" supply mandrel. Fits CSL/Classroom Series II and MRL Series roll laminators. Note: does not include mounting hardware.

Replacement control knob for ARL and CSL/Classroom roll laminators. May be used as speed control knob on ARL Series machines equipped with variable speed motor, heat control knob on ARL Digital Series machines, or heat control knob on CSL/Classroom Series III and CSL/Classroom machines with new/round profile. May be listed as part number N021 or A5846 in Owner's Manual.

Replacement deep/extended feed guide for MRL42 roll laminator. Note: does not include mounting hardware, see item 3928 for mounting hardware.

Shipping carton with foam inserts and pallet for MRL42 roll laminator.

Key lock kit for all classic/squared profile ARL Series roll laminators. Includes grey left side housing with key lock installed.

Shipping carton with foam inserts for USI CSL/Classroom 27 Series II or MiniKote roll laminators.

Shipping carton with foam inserts for USI CSL/Classroom 25 Series II or MiniKote roll laminators.

Replacement slitter block assembly for USI in-line slitter/trimmer kits. Includes slitter mounting block, hardware and instructions. Note: replacement blades are not included; use standard number 11 blade.

For USI all-purpose cart sku #0617. Consists of metal side frame pieces (one back panel, two side panel and front door assembly). Includes key lock with two keys.

For USI all-purpose cart sku #0617. Consists of key lock with two keys.

All black assembly for USI colored carts sku #7701 - blue, #7702 - purple, #7777 - green. Consists of metal side frame pieces (one back panel, two side panel and front door assembly). Includes key lock with two keys.

The ARL 2700 thermal roll laminator series is USI's most popular line of laminators and once you own one you'll know why. A favorite of thousands of schools and businesses for decades, the USI ARL 2700 series offers all of the performance of the user-friendly USI CSL 2700 laminator with additional features for professionals with larger demand applications.

Features:

• Laminates films up to 27" wide and 5 mil thick on 1" core
• Adjustable temperature with digital readout 
• Variable speed motor
• Electric reverse
• Automatic shutoff feature
• Wraparound prevention bar
• Motor key lock
• UL Listed
• Industry-best 2-year warranty (Learn more)
• Free lifetime technical support
• Free Standard Shipping

*To purchase 4 rolls of Opti Clear film with your machine at a discounted price, select:

                #2697 for 27" x 500', 1.5 mil film

                #2707 for 27" x 250', 3 mil film

USI ARL Series Product Manual
USI ARL Series Spec Sheet
USI ARL with Fans Spec Sheet
USI ARL Wiring Diagram
Watch a demonstration video
How to Thread and Load a USI Laminator