The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

The most economical retractor on the market. Its lighter duty mechanism makes it appropriate for temporary displays or for advertising seasonal specials. Five widths available, all hold a 78" tall graphic. The banner snaps into the top display bar. Use banner tape to attach graphic to the base. Unit is black in color and includes a carry case. **Hardware Only, No Banner Included**

The sleek design of the Superb Retractor offers the perfect mix of form and function. The fully telescoping pole allows you to display banners from 34.5" to 86" in height. The Superb is also small enough to be used as a table top display also. The Superb allows you to keep multiple graphics on hand by using the convenient Graphic Replacement Kit (SKU 9081) as a quick change solution. Includes nylon carry case. **Hardware Only, No Banner Included**

Never worry about your losing your banner's spring tension again. The pop out wheel with release button gives you complete control over the banner's tension. Easily reapply the tension with a turn of the wheel at any time. The banner pulls out and retracts smoothly and the telescoping pole allows you to display banners from 36" to 86" tall. The retractor accepts a 33.5" wide graphic and attaches to top display bar and base with snap rails. Unit is silver in color and includes a carry case. Looks great as a tabletop too. **Hardware Only, No Banner Included**

The Signicade Deluxe improves on the best selling Signicade sandwich board sign design by now making it easier than ever to change your graphics. Your 24" x 36" rigid signage simply slides into the grooves on the face of the A-frame. The hinges are designed to lock the display in the open position to prevent it from tipping over. Includes molded handle for easy transport. Fill with water or sand for ballast. Available in Black and White.  **Hardware only, No Print Included.**

Economical and long lasting, Made of rustproof steel, these sign holders display corrugated plastic signboards. Available in 3 sizes, Step Stake, Handheld and Tabletop.

• Step Take 10"W x 30"H
• Handheld measure 1-3/4"W x 28"H
• Tabletop measure 8"W x 3"H (base).

The easel that goes anywhere. Lightweight, black steel design sets up in seconds and can support up to 5 lbs. Conveniently folds down to fit into briefcase. Available in Tabletop (14" tall) and Full Height (63" tall).

Ideal for painting, sketching, and commercial display. Lightweight and portable, folds easily to a compact 36" closed size. Durable aluminum construction features ¾"> diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a central cross brace for extra rigidity and height adjustable lower canvas support brackets. Holds canvas from 3" to 33" in height and 1" thick.

Clamping bar for Dahle rotary (rolling) trimmer Model 558 #5430 50"

Clamping bar for Dahle rotary (rolling) trimmer Model 556 #5429 37-1/2"

Black blade assembly for 12 inch and 18 inch new style (square glide bar) Dahle hobby trimmer. Also available in Gray #0751. For old style trimmer (round glide bar) use part #5738.

Clamping bar for 18 inch new style (square glide bar) Dahle hobby trimmer. For old style trimmer (round glide bar) use part #5773.

For use in Dahle rotary (rolling) trimmers Models 551, 553, 555, 557, 559. Blade only. For blade assembly use item #6610 or #6609.

Blade assembly for 12 inch and 18 inch old style (round glide bar) Dahle hobby trimmer. For new style trimmer (square glide bar) use part #0703.

Clamping bar for 12 inch old style (round glide bar) Dahle hobby trimmer. For new style trimmer (square glide bar) use part #0709.

Clamping bar for Dahle rotary (rolling) trimmer Model 554 #0936 28-1/4"

Rotary blade assembly for Dahle rotary (rolling) trimmers Model 556 = #5429 37-1/2"> or Model 558 = #5430 50">

Rotary blade assembly for Dahle rotary (rolling) trimmers Model 552 = #5350 20-1/8"> or Model 554 = #0936 28-1/4"

Clamping bar for Dahle rotary (rolling) trimmer Model 552 #5350 20-1/8"> Non-stock item - Allow 1-2 week lead time. Please confirm base length of trimmer 25-3/4" = older 18-1/4&quot model; 27-3/4" = newer 20-1/8"> model.

The all-purpose knife features locking nose to firmly keep blade in place. Uses standard .025 utility blade.

Excellent precision cutting tool for light-to medium-duty work at home, office or studio. This Techni Edge Hobby Knife provides a soft grip for precision cutting, scoring, trimming, carving and more. \This tool uses #11 blades.

This 31" anodized aluminum ruler is difficult to misplace with its bright blue finish. Anodized finish leaves NO FINGERPRINTS. It features a nonskid bottom and easy-to-read numbers marked in graduated 16ths. A protective lip on the leading edge keeps cutting blade away from fingers. 2-1/2" wide. 

Made of hardenened aluminum and designed with a unique vertical protective guard to ensure safe, accurate cutting. Ideal for foam board. Precision ruled edge is graduated in inches (divided 16ths) and in centimeters (divided 1mm) for easy trimming jobs. Extra-wide 3-1/2" base has nonskid rubber backing to prevent slipping and accidental cuts. Convenient hanging ring.

A variety of base options are available to display your Sail Sign. Use with Cross Base (SAB02) for indoor and short-term outdoor use.

A variety of base options are available to display your Sail Sign. Use with Heavy-Duty Cross Base (SAB06) for indoor and short-term outdoor use.

Modular stand for the Titan 40 Substrate Trimmer (#9176, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

Modular stand for the Titan 60 Substrate Trimmer (#9177, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

Modular stand for the Titan 80 Substrate Trimmer (#9178, sold seperately). Includes waste catcher, roll film holder, and locking wheels.