Replacement pressure adjustment spring. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. May be listed as part number 402P or A3882 in Owner's Manual.

Replacement pressure adjustment screw for all ARL and CSL/Classroom series roll laminators except CSL/Classroom Series I and does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, W****-****, or machines with with serial numbers beginning with ">H."> May be listed as part number 403B or A3883 in Owner's Manual.

Replacement upper roller bushing. Fits all ARL and CSL/Classroom Series roll laminating machines except ARL4000, ARL4000Pro, and CSL/Classroom Series I. Note: only use as upper pull roller bushing on ARLPro2700. May be listed as part number 404B or A3884 in Owner's Manual.

Replacement lower roller bushing. Fits all ARL and CSL/Classroom Series roll laminating machines except ARL4000, ARL4000Pro, and CSL/Classroom Series I. Note: only use as lower pull roller bushing on ARLPro2700. May be listed as part number 405B or A3885 in Owner's Manual.

Replacement heat shoe mounting bracket. Fits all ARL and CSL/Classroom Series roll laminating machines except ARL4000, and CSL/Classroom Series I. May be listed as part number 505B or A3886 in Owner's Manual.

Replacement upper heat shoe spacer for all ARL and CSL/Classroom 25" and 27" heat shoe roll laminators except CSL/Classroom Series I and ARL4000. May be listed as part number 507P or A3887 in Owner's Manual.

Replacement lower heat shoe spacer for all ARL and CSL/Classroom 25" and 27" heat shoe roll laminators except CSL/Classroom Series I and ARL4000. May be listed as part number 506P or A3888 in Owner's Manual.

Replacement heat guard for all 25" ARL and CSL/Classroom Series II, and III laminating machines. May be listed as part number 512B in Owner's Manual.

Replacement lower heat shoe for all 25" ARL and CSL/Classroom Series II laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement base channel/foot bracket. Fits all ARL classic/squared profile machines except Digital. Fits CSL/Classroom Series II and gray Series III machines. Fits all new/round profile ARL and CSL/Classroom machines except machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, W****-****, or machines with with serial numbers beginning with ">H."> May be listed as part number 602B or A9905 in Owner's Manual.

Replacement left mandrel support bracket. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. May be listed as part number 603B or A3893 in Owner's Manual.

Replacement base channel. Fits all ARL classic/squared profile roll laminators except Digital. May be listed as part number 607C in Owner's Manual.

Replacement tinnerman bracket. Fits all ARL and CSL/Classroom series roll laminators except CSL/Classroom Series I and does not fit machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number 609P or A4503 in Owner's Manual.

Replacement reinforcing bar for all 25" ARL and CSL/Classroom Series laminating machines. Does not include mounting hardware. May be listed as part number 616B in Owner's Manual.

Replacement left feed guide. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. Does not include mounting hardware. May be listed as part number701C or A3899 in Owner's Manual.

Replacement motor housing. Fits all 25" ARL and CSL/Classroom Series II and III roll laminators. May be listed as part number 702C in Owner's Manual.

Replacement 27" rubber roller for 27" ARL and CSL/Classroom roll laminators. Can be used as laminating (front) or pull (rear) roller; pull roller only on ARLPro2700. May be listed as part number 100C or A3905 in Owner's Manual.
 

**To ensure a proper fit of the new rubber roller we recommend also purchasing the corresponding roller shaft

Upper Shaft: Sku# 3908

Lower Shaft: Sku# 3909

Replacement idler roller for all 27" ARL and CSL/Classroom Series roll laminators except ARLPro2700. May be used as upper or lower, includes dowel pins and nylon washers. May be listed as part number 013B or A3907 in Owner's Manual.

Replacement upper roller shaft. Fits all 27" ARL and CSL/Classroom roll laminators. Can be used with upper laminating (front) or pull (rear) roller; pull roller only on ARLPro2700. May be listed as part number 101B or A3908 in Owner's Manual.

Replacement lower roller shaft for machines not equipped with manual reverse crank. Fits all 27" ARL and CSL/Classroom roll laminators. Can be used with lower laminating (front) or pull (rear) roller; pull roller only on ARLPro2700. May be listed as part number 102B or A3909 in Owner's Manual.

Replacement lower roller shaft for 27" ARL classic/squared profile and CSL/Classroom 27 Series II machines equipped with manual reverse crank. Can be used with lower pull (rear) roller only. May be listed as part number 102BMR in Owner's Manual.

Replacement 1/2" roll pin for supporting feed table or heat guard. Fits all ARL and CSL/Classroom Series roll laminating machines except CSL/Classroom Series I. May be listed as part number 7R or A4546 in Owner's Manual.

Gray left side housing for classic/squared profile USI ARL and Gray CSL/Classroom Series III roll laminating machines. Does not have a hole for keylock switch. May be listed as part number 703B in Owner's Manual. Note: for side housing for machines with a keylock, see item 0559.

Gray right side housing for classic/squared profile USI ARL and Gray CSL/Classroom Series III roll laminating machines. Does not have a hole for manual reverse crank. May be listed as part number 908BG in Owner's Manual. Note: for side housing for machines with a manual reverse crank, see part number 3915.

Gray right side housing for classic/squared profile USI ARL roll laminating machines. For machines equipped with a manual reverse crank. May be listed as part number 908BGMR in Owner's Manual. Note: for side housing for machines without a manual reverse crank, see part number 3914.

Replacement 18" rubber roller for all 18" ARL roll laminators. Can be used as laminating (front) or pull (rear) roller. May be listed as part number 100C or A4666 in Owner's Manual.

Replacement drive chain for new/rounded profile USI ARL and CSL/Classroom Series roll laminating machines excpet ARL4000 and ARLPro Series. May be listed as part number A9978 in Owner's Manual.

Replacement upper heat shoe fits all 27" ARL and CSL/Classroom Series laminating machines except machines with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C A4772 in Owner's Manual.

Replacement lower heat shoe for all 27" ARL and CSL/Classroom Series II laminating machines equipped with thermoswitch; not compatible with digital or capillary type thermostats. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement upper 1" diameter supply mandrel for all 27" ARL Series, 27" CSL/Classroom Series II and III, or CSL/Classroom2700 roll laminating machines. May be listed as part number 907B or A3920 in Owner's Manual.