Operations manual for ARL1800 and 2700 Digital model roll laminators with new/rounded profile. Serial numbers: ARL2700 0602-0001 to 0905-0950; ARL1800 all.

Operations manual for ARL2700 Digital model roll laminators with new/rounded profile. Serial numbers 40001-0708 and up or 50001-0708 and up.

Operations manual for classic/squared profile Digital ARL and CSL/Classroom Series III roll laminating machines.

Operations manual for classic/squared profile ARL and CSL/Classroom Series II laminator.

Shipping carton with foam inserts for classic/squared profile ARL 18" roll laminating machine; machine skus #0013, #7544, or #6217. Note: for new/rounded profile ARL1800 machines built 2002 or later, please use item #0612.

Replacement "snap-in" style heat power switch. Fits all USI ARL and CSL/Classroom Series roll laminators with new/rounded profile. Switch and bezel only, does not include wires. See item 3933 for replacement wire. May be listed as part number A5510 in Owner's Manual.

Replacement "snap-in" style motor drive switch. Fits all USI ARL roll laminators with new/rounded profile, and CSL/Classroom Series machines with the following serial number sequences: 0****-****, 1****-****, or 9****-****. Switch and bezel only, does not include wires. May be listed as part number A5511 in Owner's Manual

Replacement keylock switch for USI ARL roll laminating machine. Keys are included. May be listed as part number A5533 in Owner's Manual.

Replacement gray left side housing for classic/squared profile USI ARL roll laminating machines. Has hole for keylock for machines so equipped; keylock not included. May be listed as part number 703B in Owner's Manual. Note: for side housing for machines without a keylock, see part number 3914.

Replacement top friction stud. Fits all ARL & CSL/Classroom Series II, III and 2700 roll laminating machines. May be listed as part number 902B or A0970RD in Owner's Manual.

Replacement bottom friction stud. Fits all ARL & CSL/Classroom Series II, III and 2700 roll laminating machines. May be listed as part number 902B or A0970BU in Owner's Manual.

Shipping carton with foam inserts for ARL1800 roll laminator with new/rounded profile; machines skus #7762 or #7763. Note: for classic /squared profile ARL 18" roll laminating machines, please use item #0048.

Shipping carton with foam inserts for ARL2700 or CSL/Classroom 2700 roll laminator new/rounded profile; machine skus #7759, #7760, #7761, #7764 or #7765. Note: for classic/square profile ARL27" or CSL/Classroom 27" roll laminating machines, please use item #1813.
 

Shipping carton with foam inserts for classic/squared profile ARL25 or CSL/Classroom 25 Series III roll laminating machines.

Single speed AC gearmotor for classic/squared profile USI ARL and CSL/Classroom Series II roll laminating machines with preset, non-variable speed. May be listed as part number 300P or A0907 in Owner's Manual.

Note: part shown in photo is for identification purposes, appearance of actual service part may vary.

Replacement non-lighted rocker switch for all USI ARL classic/squared profile and CSL/Classroom Series II roll laminators equipped with single speed drive motors. Can be used as heat switch or drive switch; switch only, wires not included. If wires are required when using as a heat switch, see item number 3933. May be listed as part number 800P in Owner's Manual.

Replacement 25" rubber roller for 25" ARL and Series II and III CSL/Classroom roll laminators. Can be used as laminating (front) or pull (rear) roller. May be listed as part number 100C or A4556 in Owner's Manual.

Replacement plastic deflector for 25" ARL and Series III CSL/Classroom roll laminators. May be listed as part number 715C or A4565 in Owner's Manual.

Replacement temperature controlling thermoswitch for all USI ARL classic/squared profile and CSL/Classroom Series II roll laminating machines except ARL Digital. May be listed as part number 518P in Owner's Manual.

Shipping Carton w/Foam Inserts for ARL/CSL 27" Roll Laminator - Classic/Squared Profile

Heat switch kit with wires for all CSL/Classroom Series II and III roll laminators and classic/squared profile ARL roll laminators equipped with single speed drive motor and non-lighted heat switch. Kit includes one non-lighted rocker switch and two switch wires.

Heat switch kit with wires for all classic/squared profile ARL roll laminators equipped with variable speed drive motor and lighted heat power switch. Kit includes one lighted rocker switch and three switch wires.

Heat switch kit with wires for all new/rounded profile ARL and CSL/Classroom roll laminators equipped with lighted heat power switch. Kit includes one lighted rocker switch with bezel and three switch wires.

Replacement "snap-in" style heat poser switch kit. Fits all USI ARL and CSL/Classroom Series roll laminators with new/rounded profile. Includes switch, bezel and wires. Note: will fit machines equipped with or without auto shut-off timer.

Replacement upper 1" diameter supply mandrel for all 18" ARL roll laminating machines. May be listed as part number 907B or A4577 in Owner's Manual.

Lighted heat switch for all USI ARL classic/squared profile roll laminating machines equipped with variable speed motor. Switch wires not included; if switch wires are required see item number 3933.

Replacement lower 1" diameter supply mandrel for all 18" ARL roll laminating machines. May be listed as part number 907B or A4578 in Owner's Manual.

Replacement upper 1" diameter supply mandrel for all 25" ARL Series and 25" CSL/Classroom Series II and III roll laminating machines. May be listed as part number 907B or A4575 in Owner's Manual.

Replacement lower 1" diameter supply mandrel for all 25" ARL Series and 25" CSL/Classroom Series II and III roll laminating machines. May be listed as part number 907B or A4576 in Owner's Manual.

Heat shoe hanger assembly for USI ARL and CSL/Classroom roll laminators. May be listed as part number 608P in Owner's Manual.