For machines beginning with serial # 0,1,2,3,6,7,8 & 9

For machines beginning with serial # 4 & 5

The Spiral Speedy-Lam 330R10 10 Roller Laminator is the fastest pouch laminator available. It is capable of laminating up to 12' per minute. This allows you to run a letter-sized pouch every 5 seconds. The Speedy-Lam 330R10 offers 6 heated rollers, 2 cooling rollers and 2 outlet rollers. This unique 10-roller system offers super-fast lamination speeds while assuring high quality results even on difficult to laminate items such as photos, inkjet prints and color copies. Its patented cooling system keeps the exterior of the laminator cool to the touch even when doing long production runs. The Speedy-Lam 330R10 offers a cool down cycle. Just press and hold the power button to active it. The cooling fans will continue to run until the machine has reached the correct shut down temperature. When the system is cool, it will automatically shut itself off thus preventing damage to the heated rollers. The easy to remove top roller cover makes maintenance on the system simple.

Features:

• Temperature Control
• Speed Control
• Reverse Switch
• Electrical is CE Approved!

LCD Display Features:

• Temp. - variable heat controls
• Speed - variable speed controls
• Reverse - to clear jams
• Hot & Cold - allows for both types of lamination
• Counter & Reset - measure amount of lamination produced in a session
• Memory - to preset jobs
• Measure - measure actual roller temperature

Spiral Speedy-Lam 330R10 Informational Sheet

The Spiral Sprinter 335R6 Pouch Laminator is a professional 6-roller laminator that is designed for laminating photos and digital images bubble free. The advanced hot 6-roller system with adjustable speed ensures quality and trouble-free operation. The Sprinter comes complete with a reverse function and solid state digital temperature controls. The advanced 6-roller design features 4 heated and 2 cold rollers to ensure perfect document lamination without the use of a carrier. The memory function helps to select the perfect temperature and speed for individual requirements. Laminating pouches from 3 to 10 mil and handling pouches up to 12" x 18", the 335R6 offers all-metal construction with a smooth, quiet motor and indicator lights that inform the operator when it is ready to use. 

Features:

• Auto Power Off - If not used for more than 2 hours continuously, the power will automatically shut off.
• Strong Air Cooling System - For fast, high quality laminating.
• Super Clean Rollers (international patented) - Special anti-static treatment resists dust and resin build up.
• Temperature Control.
• Speed Control.
• Reverse Switch.
• Electrical is CE Approved.

LCD Display:

• MEAS - Measures actual roller temp.
• STOP - Stops roller for emergency
• REV - Reverse action
• SB - Stand by function
• HOT - Initial setting to 110 C , Speed 4
• COLD - Cold film lamination
• MEMO - Memory function
• SPEED - Variable speed from 1 to 9

Spiral Sprinter 335R6 Information Sheet

Replacement motor control PC board. Fits all ARL Series 120 Volt roll laminators equipped with variable speed motor. For classic/squared profile ARL roll laminators with serial numbers 9252-999 or lower see item 4764. May be listed as part number N020 or A6101 in Owner's Manual.

Replacement friction disk. Fits all USI ARL and CSL/Classroom Series roll laminators except CSL/Classroom Series I. May be used as upper or lower. May be listed as part number 906B or A5104 in Owner's Manual.

Replacement heat guard for all USI ARL Series 18" roll laminators. May be listed as part number 512B or A4662 in Owner's Manual.

Replacement 18", 120V AC, 800 Watt heater cartridge for all USI ARL Series 18" roll laminators. May be listed as part number 517P or A4729 in Owner's Manual.

Replacement upper roller shaft. Fits all 18" ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A4659 in Owner's Manual.

Replacement complete feed table assembly for all USI ARL Series 12"> roll laminators. Includes feed table, guide and guide hardware. May be listed as part number 900C in Owner's Manual.

Replacement heat guard for all USI ARL Series 12"> roll laminators. May be listed as part number 512B or A4611 in Owner's Manual.

Replacement upper roller shaft. Fits all 12"> ARL Series roll laminators. Can be used with upper laminating (front) or pull (rear) roller. May be listed as part number 101B or A5728 in Owner's Manual.

Replacement lower roller shaft for 12"> USI ARL Series roll laminators. May be used as lower laminating (front) or pull (rear) roller. Note: may be used as lower laminating (front) only on machines equipped with manual reverse crank. May be listed as part number 102B or A5729 in Owner's Manual.

Replacement upper heat shoe for all 12"> USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 12"> ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not include heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Replacement upper heat shoe for all 18" USI ARL Series laminating machines. Does not include heater, thermostat or mounting hardware. May be listed as part number 515C in Owner's Manual.

Replacement lower heat shoe for all 18" USI ARL Series laminating machines equipped with thermoswitch; not compatible with digital type thermostats. Does not contain heater, thermostat or mounting hardware. May be listed as part number 516C in Owner's Manual.

Heater assembly for USI 31" roll laminating machine. Equivalent part number: 800ELX

Replacement slitter blade for all MRL Series roll laminators. Note: blade only, see item 5119 for complete blade holder assembly.

Replacement feed table for MRL42 roll laminator. Note: does not include feed guide. See items 5851 and 3928 for feed guide and hardware.

Replacement upper 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement lower 2 1/4" supply mandrel for MRL42 roll laminator.

Replacement core gripper for 2 1/4" supply mandrel. Fits CSL/Classroom Series II and MRL Series roll laminators. Note: does not include mounting hardware.

Replacement control knob for ARL and CSL/Classroom roll laminators. May be used as speed control knob on ARL Series machines equipped with variable speed motor, heat control knob on ARL Digital Series machines, or heat control knob on CSL/Classroom Series III and CSL/Classroom machines with new/round profile. May be listed as part number N021 or A5846 in Owner's Manual.

Replacement deep/extended feed guide for MRL42 roll laminator. Note: does not include mounting hardware, see item 3928 for mounting hardware.

Shipping carton with foam inserts and pallet for MRL42 roll laminator.

Key lock kit for all classic/squared profile ARL Series roll laminators. Includes grey left side housing with key lock installed.

Shipping carton with foam inserts for USI CSL/Classroom 27 Series II or MiniKote roll laminators.

Shipping carton with foam inserts for USI CSL/Classroom 25 Series II or MiniKote roll laminators.

Replacement slitter block assembly for USI in-line slitter/trimmer kits. Includes slitter mounting block, hardware and instructions. Note: replacement blades are not included; use standard number 11 blade.