Key lock kit for all classic/squared profile ARL Series roll laminators. Includes grey left side housing with key lock installed.

Shipping carton with foam inserts for USI CSL/Classroom 27 Series II or MiniKote roll laminators.

Shipping carton with foam inserts for USI CSL/Classroom 25 Series II or MiniKote roll laminators.

Replacement slitter block assembly for USI in-line slitter/trimmer kits. Includes slitter mounting block, hardware and instructions. Note: replacement blades are not included; use standard number 11 blade.

Complete replacement lower heat shoe assembly including heat shoe with heater and thermistor installed. Fits all USI ARL2700 Digital and CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number A4745DTF in Owner's Manual.

Replacement upper roller retaining ring for all ARL and CSL/Classroom Series II, III and 2700 roll laminators.

Replacement right switch label for all ARL2700 Digital model roll laminators with new/rounded profile. May be listed as part number A5927 in Owner's Manual.

Replacement 27" lower laminating roller for ARLPRO2700 roll laminators.

Replacement 27" upper laminating roller for ARLPRO2700 roll laminators.

Replacement upper digital temperature control board for all USI ARLPRO2700 Series roll laminators.

Replacement upper thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

Replacement lower thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

Replacement shoulder screw for mounting lower heat shoe assembly. Fits all USI ARL2700 Digital and CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number G4510 in Owner's Manual.

Replacement digital temperature control board. Fits all USI ARL2700 Digital and ARL4000 Digital roll laminators with new/rounded profile with the following serial number sequences: 40845-**** or higher, 50789-**** or higher, 8901****-****. May be listed as part number G4689B in Owner's Manual.

Replacement thermistor assembly for all USI ARL2700 Digital, ARL4000 Digital and CSL/Classroom 2700 Series roll laminators with the following serial number sequences: 00625-**** and higher, 10609-**** and higher, 40845-**** and higher, 50789-**** and higher, 90869-**** and higher, G0909-**** and higher, W0665-**** and higher, or 8901-****-****.

Replacement digital temperature control board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 90870-**** or higher, 00626-**** or higher, 10610-**** or higher, and G0910-**** or higher. May be listed as part number S4690B in Owner's Manual.

Replacement motor power supply board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-**** or, 9****-****. May be listed as part number S6102 in Owner's Manual.

Replacement motor power supply fuse for all 120Volt ARL, ARL Digital, ARLPRO and CSL/Classroom Series laminators equipped with a motor power supply.

Replacement thermometer for all classic/squared profile ARL, and all CSL/Classroom Series roll laminating machines. May be listed as part number 915P or A4506 in Owner's Manual.

Replacement non-lighted rocker switch for all USI ARL classic/squared profile and CSL/Classroom Series II roll laminators equipped with single speed drive motors. Can be used as heat switch or drive switch; switch only, wires not included. If wires are required when using as a heat switch, see item number 3933. May be listed as part number 800P in Owner's Manual.

Replacement 25" rubber roller for 25" ARL and Series II and III CSL/Classroom roll laminators. Can be used as laminating (front) or pull (rear) roller. May be listed as part number 100C or A4556 in Owner's Manual.

Replacement plastic deflector for 25" ARL and Series III CSL/Classroom roll laminators. May be listed as part number 715C or A4565 in Owner's Manual.

Replacement temperature controlling thermoswitch for all USI ARL classic/squared profile and CSL/Classroom Series II roll laminating machines except ARL Digital. May be listed as part number 518P in Owner's Manual.

Shipping Carton w/Foam Inserts for ARL/CSL 27" Roll Laminator - Classic/Squared Profile

Heat switch kit with wires for all CSL/Classroom Series II and III roll laminators and classic/squared profile ARL roll laminators equipped with single speed drive motor and non-lighted heat switch. Kit includes one non-lighted rocker switch and two switch wires.

Heat switch kit with wires for all classic/squared profile ARL roll laminators equipped with variable speed drive motor and lighted heat power switch. Kit includes one lighted rocker switch and three switch wires.

Heat switch kit with wires for all new/rounded profile ARL and CSL/Classroom roll laminators equipped with lighted heat power switch. Kit includes one lighted rocker switch with bezel and three switch wires.

Replacement "snap-in" style heat poser switch kit. Fits all USI ARL and CSL/Classroom Series roll laminators with new/rounded profile. Includes switch, bezel and wires. Note: will fit machines equipped with or without auto shut-off timer.

Replacement upper 1" diameter supply mandrel for all 18" ARL roll laminating machines. May be listed as part number 907B or A4577 in Owner's Manual.

Lighted heat switch for all USI ARL classic/squared profile roll laminating machines equipped with variable speed motor. Switch wires not included; if switch wires are required see item number 3933.