Product Search

- Optional

This is our largest outdoor display!  Adjusts up to 17 feet high! Get your message noticed with a custom full color digitally printed flag. You supply the art, we print it. Full color flag (42" x 120" viewable size) printed on polyester fabric. Double-folded & double-stitched hems and finished with #2 grommets for the Giant Outdoor Flag Display (included). Available in Single and Double sided.

View Details

Need to capture attention for an upcoming event, indoors or outdoors? We have the solution! A custom full color digitally printed banner. You supply the art, we print it and ship it. Banner is single side printed on our 13-oz semi-gloss vinyl. The first dimension is the height and the second is the width. Banner is finished with double-folded & double-stitched hems with grommets and 1/4" polypropylene rope.

View Details

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner double-side printed on our 18-oz opaque vinyl and formatted for the Versatile Boulevard Bracket. Finished with stitched pole pockets and grommet top and bottom.

Note: Stand is not included in this price.

View Details

A custom full color digitally printed flag is a great attention getter and can be used inside or outside. You supply the art, we print it and ship it. Flag is single side printed on dacron (front side correct - back side reverse). The first dimension is the height and the second is the width. Flag is finished with double-stitched hems with canvas leader and grommets.

View Details

Get your message noticed with a custom full color digitally printed banner. You supply the art, we print it. Full color banner printed on our 10-oz semi-gloss vinyl and formatted for the Versatile Series Banner Stands (SKUs 8787, 8826, & 8827). 24" x 71" viewable size, finished with stitched pole pockets top and bottom. Stand not included.

View Details

Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.

View Details

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

View Details

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

View Details

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

View Details

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

View Details

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

View Details

A complete professional document finishing system. Perfect for posters, displays, and documents up to 25" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat or electricity. Simply feed the item in, turn the handle, and trim. No smell, no mess, no waiting.

View Details

A wide format cold encapsulating laminator has arrived. Perfect for posters and displays up to 42" wide. Instantly applies dual laminate or a laminate/adhesive combination without heat. Unit has an emergency stop and a reversible motor to quickly clear a misfeed. Stand and foot switch included.

View Details

Complete replacement lower heat shoe assembly including heat shoe with heater and thermistor installed. Fits all USI ARL2700 Digital and CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number A4745DTF in Owner's Manual.

View Details

Replacement upper roller retaining ring for all ARL and CSL/Classroom Series II, III and 2700 roll laminators.

View Details

Replacement right switch label for all ARL2700 Digital model roll laminators with new/rounded profile. May be listed as part number A5927 in Owner's Manual.

View Details

Replacement 27" lower laminating roller for ARLPRO2700 roll laminators.

View Details

Replacement 27" upper laminating roller for ARLPRO2700 roll laminators.

View Details

Replacement upper digital temperature control board for all USI ARLPRO2700 Series roll laminators.

View Details

Replacement upper thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

View Details

Replacement lower thermal fuse assembly for all USI ARLPRO2700 Series roll laminators.

View Details

Replacement shoulder screw for mounting lower heat shoe assembly. Fits all USI ARL2700 Digital and CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-****, 4****-****, 5****-****, 9****-****, G****-****, or W****-****. May be listed as part number G4510 in Owner's Manual.

View Details

Replacement digital temperature control board. Fits all USI ARL2700 Digital and ARL4000 Digital roll laminators with new/rounded profile with the following serial number sequences: 40845-**** or higher, 50789-**** or higher, 8901****-****. May be listed as part number G4689B in Owner's Manual.

View Details

Replacement thermistor assembly for all USI ARL2700 Digital, ARL4000 Digital and CSL/Classroom 2700 Series roll laminators with the following serial number sequences: 00625-**** and higher, 10609-**** and higher, 40845-**** and higher, 50789-**** and higher, 90869-**** and higher, G0909-**** and higher, W0665-**** and higher, or 8901-****-****.

View Details

Replacement digital temperature control board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 90870-**** or higher, 00626-**** or higher, 10610-**** or higher, and G0910-**** or higher. May be listed as part number S4690B in Owner's Manual.

View Details

Replacement motor power supply board. Fits all USI CSL/Classroom 2700 Series roll laminators with new/rounded profile with the following serial number sequences: 0****-****, 1****-**** or, 9****-****. May be listed as part number S6102 in Owner's Manual.

View Details

Replacement motor power supply fuse for all 120Volt ARL, ARL Digital, ARLPRO and CSL/Classroom Series laminators equipped with a motor power supply.

View Details

Replacement motor control PC board. Fits all ARL Series 120 Volt roll laminators equipped with variable speed motor. For classic/squared profile ARL roll laminators with serial numbers 9252-999 or lower see item 4764. May be listed as part number N020 or A6101 in Owner's Manual.

View Details

Replacement friction disk. Fits all USI ARL and CSL/Classroom Series roll laminators except CSL/Classroom Series I. May be used as upper or lower. May be listed as part number 906B or A5104 in Owner's Manual.

View Details

Replacement slitter block assembly for all MRL Series roll laminators. Note: for replacement blade only, see item 5816.

View Details