Brightly colored, fade-resistant paper is great for bulletin boards, murals and large art projects. Heavyweight 50lb. paper is colored throughout so it will not erase off. Specially coated on one side, acid-free and recyclable. Comes in convenient dispenser box. Other Colors Available.

Designed for use with direct thermal printers like Varitronics/FujiFilm poster printers, MCSI/Minnesota Western chart printers and others. Actual roll width is 23-3/8"> Paper is chemically treated to react to the heated print heads.

Also available in 29"> and 36" width by special order. Please CALL for availability and pricing.

A variety of base options are available to display your Sail Sign. Cross Base for indoor and short-term outdoor use. Recommend using round water ballast (SAB03) for added stability.

A variety of base options are available to display your Sail Sign. Vehicle Base allows you to display Sail Sign next to a vehicle.

A variety of base options are available to display your Sail Sign. Heavy-Duty Cross Base for indoor and short-term outdoor use. Recommend using square water ballast (SAB04) for added stability.

These 4 Steel Dowels are 24" in length and are meant to be used with items 8826, 8827, 8787 USI's versatile banner displays.

Specially designed case for the Versatile Everyday and Heavy-Duty Banner Displays with sqare base. Made from luggage-quality polyester with heavy-duty shoulder straps for easy transport.

Offers the quickest change of graphic for the Superb Retractor (SKU 9072). Allows you to keep a library of your frequent repeating messages.

Grommet Die #0. Inner Diameter: 1/4" Outer Diameter: 9/16" Machine not included. Other die sizes available.

Grommet Die #2. Inner Diameter: 3/8" Outer Diameter: 3/4" Machine not included. Other die sizes available.

Grommet Die #3. Inner Diameter: 7/16" Outer Diameter: 7/8"> Machine not included. Other die sizes available.

Grommet Die #1. Inner Diameter: 5/16" Outer Diameter: 5/8"> Machine not included. Other die sizes available.

This state-of-the-art system is designed to withstand the elements. The base is made of rust-free cast aluminum with fiberglass arms.The fiberglass arms flex in strong winds transferring some of the wind load off the banner sign. Stainless steel bands make installation easy. Also available in 24", 30", and 36" widths as well as double bracket models. Maximum banner size recommended is 24 square feet. The unique base will fit square, round, or multi-sided sign poles.

The stainless steel spring arm design bends up to 60-degrees to deflect the strongest winds, helping banners last longer. Use this system exclusively when you are mounting banners to old wooden or steel poles as the spring arm also significantly reduces wind load on the pole. Banner change out is super easy too. Just bend the rod, slip off the banner and slip on a new one. Also available in double bracket version.

The Wall Mount Bracket is used to hang banners on walls and other flat surfaces. The cast aluminum bracket does not corrode or rust from being outdoors. This bracket uses many of the components of our Boulevard Bracket System to secure the fiberglass poles to the base. Also available with 24", 30", and 36" poles. Maximum recommended banner size is 24 square feet. Mounting hardware not included.

The everyday banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/4" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 12" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 3/8" diameter dowels. Sturdy 13" square base. Folding base (#8787) also available. **Hardware Only.  No Banner Included.**

The heavy-duty banner stand is designed to accommodate one or two pocketed banners or rigid substrate signs up to 1/8" thick. Thumbscrews make is easily adjustable. Easy-to-assembly with snap together parts. Use just one side or put two signs/banners back to back. Height adjusts to hold displays 48" to 90" high. Holds banners 18" to 36" wide. Finish banners with pole pockets using banner tape and 1/2" diameter dowels. Sturdy 14" square base.

The most economical retractor on the market. Its lighter duty mechanism makes it appropriate for temporary displays or for advertising seasonal specials. Five widths available, all hold a 78" tall graphic. The banner snaps into the top display bar. Use banner tape to attach graphic to the base. Unit is black in color and includes a carry case. **Hardware Only, No Banner Included**

The sleek design of the Superb Retractor offers the perfect mix of form and function. The fully telescoping pole allows you to display banners from 34.5" to 86" in height. The Superb is also small enough to be used as a table top display also. The Superb allows you to keep multiple graphics on hand by using the convenient Graphic Replacement Kit (SKU 9081) as a quick change solution. Includes nylon carry case. **Hardware Only, No Banner Included**

Never worry about your losing your banner's spring tension again. The pop out wheel with release button gives you complete control over the banner's tension. Easily reapply the tension with a turn of the wheel at any time. The banner pulls out and retracts smoothly and the telescoping pole allows you to display banners from 36" to 86" tall. The retractor accepts a 33.5" wide graphic and attaches to top display bar and base with snap rails. Unit is silver in color and includes a carry case. Looks great as a tabletop too. **Hardware Only, No Banner Included**

The Signicade Deluxe improves on the best selling Signicade sandwich board sign design by now making it easier than ever to change your graphics. Your 24" x 36" rigid signage simply slides into the grooves on the face of the A-frame. The hinges are designed to lock the display in the open position to prevent it from tipping over. Includes molded handle for easy transport. Fill with water or sand for ballast. Available in Black and White.  **Hardware only, No Print Included.**

Economical and long lasting, Made of rustproof steel, these sign holders display corrugated plastic signboards. Available in 3 sizes, Step Stake, Handheld and Tabletop.

• Step Take 10"W x 30"H
• Handheld measure 1-3/4"W x 28"H
• Tabletop measure 8"W x 3"H (base).

The easel that goes anywhere. Lightweight, black steel design sets up in seconds and can support up to 5 lbs. Conveniently folds down to fit into briefcase. Available in Tabletop (14" tall) and Full Height (63" tall).

Ideal for painting, sketching, and commercial display. Lightweight and portable, folds easily to a compact 36" closed size. Durable aluminum construction features ¾"> diameter two-section telescoping legs with non-skid rubber feet and quick-release leg locks. Height is 63" when fully extended and 34" in its lowest position. Features include a central cross brace for extra rigidity and height adjustable lower canvas support brackets. Holds canvas from 3" to 33" in height and 1" thick.

This fits the Lassco Desktop Corner Rounder machine. This is for the Die only. Availabe in 4 sizes, 1/8", 14", 3/8" and 1/2".

Handles paper and plastic products up to 1/2" thick. Sear action cutting. Set includes cutter and die. Available with 4 size dies, 1/8", 14", 3/8" and 1/2".

Modular stand for the Titan 40 Substrate Trimmer (#9176, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

Modular stand for the Titan 60 Substrate Trimmer (#9177, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

Modular stand for the Titan 80 Substrate Trimmer (#9178, sold seperately). Includes waste catcher, roll film holder, and locking wheels.

Modular stand for the Titan 100 Substrate Trimmer (#9179, sold seperately). Includes waste catcher, roll film holder, and locking wheels.