MakerBot PLA Filament is a first-class filament optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.
 

Compatibility

MakerBot Natural PLA Filament is compatible with the MakerBot Replicator 2 and Earlier Models,MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is a set of filaments optimized for Fifth Generation MakerBot Replicator 3D Printers and the MakerBot Replicator 2 Desktop 3D Printer. Like all MakerBot 3D Filaments, it's made in the USA and tested in-house to help produce the finest 3D prints, reduce filament problems, and minimize downtime.

Explore your creativity with a wide variety of colors and special properties in a filament with a consistently round diameter to ensure consistent flow through the extruder nozzle and smooth, even layers. When used with MakerBot Replicator 3D Printers, MakerBot PLA Filament helps produce higher quality prints, reduce filament problems, and minimize downtime.

Compatibility

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) is compatible with the MakerBot Replicator 2 and Earlier Models, MakerBot Replicator 5th Generation and MakerBot Replicator Z18.

MakerBot True Color Large PLA Filament 10 Pack (Black, White, Red, Orange, Yellow, Green, Blue, Purp) Available in Large and Small spools.

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 4 mm thick white corrugated plastic board
• Permanent short term outdoor adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white foam board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per box

Self Adhesive Pouch Boards are self stick boards with attached gloss or matte laminate film. Use Self Adhesive Pouch Boards for mounting and laminating prints in one process. With the laminate pre-attached smoothly at the leading edge of the board, no set-up is required. You will achieve fast, consistent and professional laminating results. Great for on-demand and small runs of less than 10 prints. Can be used in any roll laminator or applied by hand. For sizes larger than 12"x18" we recommend using a laminator. Features include:

• 3/16" thick white gator board
• Permanent adhesive both on the board and laminate sheet to allow flush trimming
• 1/4" leading edge where film is attached to the self-stick board
• One piece construction let's you know your costs
• Easy to use in any Laminator
• 10 pouch boards per boxVJ42XLKB

Each white foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Gloss finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available.Contains Box of 10 Boards

Made of 3/16" white foam board coated with heat-activated adhesive. Simply center print on adhesive board, and cover with release paper. Secure the top edge with 2 small pieces of tape and feed through the laminator for a professionally mounted print. Additional sizes and colors also available. Available in boxes of 10 and 25.

The gold standard by which the professionals measure quality. USI's ProMount™ Ultra is simply the best - bar none. Individually hand crafted, each board is thoroughly inspected and signed by our skilled craftsmen to guarantee you are getting the ultimate in quality heat-activated mounting board. ProMount™ Ultra's 1/4" thick ultra-rigid foam board is made of high-density expanded polystyrene and double-thick clay-coated paper that is water resistant. Does not warp or bow when working with prints and wide-format graphics. Black. Additional sizes and colors also available.Contains Box of 10 Boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with cold adhesive. Available in boxes of 5 and 10.

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Satin Finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Each foam board is coated with a heat-activated adhesive and a 5mil film-laminate hinged at the top edge to form a pouch. To mount and laminate, slide a print between the film and board, then feed it through the laminator. Luster (matte) finish. Additional color, sizes and finishes also available. Contains Box of 10 Boards

Perfect for mounting artwork from lightweight layouts to heavyweight posters. Just peel back the easy-release protective liner to reveal the pressure-sensitive adhesive. Position the artwork, and press. The 3/16" board is strong, durable and warp resistant. It cuts easily and precisely, leaving clean, sharp and finished edges. Mounts without a ripple, leaving the surface smooth and flawless. Black and other sizes also available.Contains Box of 10 boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. Also available plain or with heat activated adhesive. Available in boxes of 5 and 10.

These lightweight PVC boards have a uniform, fine, closed-cell structure that provide a low gloss luster finished surface. The moisture, scratch, and dent resistance characteristics of Sintra® make it a great choice for framing, signage, exhibits, and POP applications. Also available without adhesive.Contains Box of 10 Boards

An economical lightweight solution for outdoor signage. These 4mm (3/16") boards perfectly fit our plastic and metal sign holders.

Achieve superior results with these high-quality 3/16" boards. Designed to meet all mounting requirements. Black and other sizes also available.Contains Box of 10 Boards

This high-quality board delivers a smooth edge for all mounting applications. Use for display, mounting, graphics and craft applications. White and other sizes also available.Contains Pack of 5 Boards

Look no further if you need a light-weight board with extra rigidity. Gator's wood based facers keep the board flat and resist warping. Gator will provide excellent mounting and laminating performance with all standard equipment. It also provides a good flat surface than can be screen or digitally printed. Also available with cold or heat activated adhesive. Available in boxes of 5 and 10.

USI ProMount™ PVC is a high-performance, moderately expanded PVC foam sheet for high-end graphics and architectural applications. The fine cell structure and smooth surface finish makes it a superior choice for professional printers, sign makers and exhibition contractors. Each board has a polyethylene masking on one side which removes cleanly revealing a smooth surface finish ideally suited for screen and digital printing applications.Contains Box of 10 boards

USI ProMount™ PVC is a high-performance, moderately expanded PVC foam sheet for high-end graphics and architectural applications. The fine cell structure and smooth surface finish makes it a superior choice for professional printers, sign makers and exhibition contractors. Each board has a polyethylene masking on one side which removes cleanly revealing a smooth surface finish ideally suited for screen and digital printing applications.Contains Box of 10 boards

These lightweight PVC boards have a uniform, fine, closed-cell structure that provide a low gloss luster finished surface. The moisture, scratch, and dent resistance characteristics of Sintra® make it a great choice for framing, signage, exhibits, and POP applications. Also available coated with cold adhesive. Contains box of 10 boards

These lightweight PVC boards have a uniform, fine, closed-cell structure that provide a low gloss luster finished surface. The moisture, scratch, and dent resistance characteristics of Sintra® make it a great choice for framing, signage, exhibits, and POP applications. Also available coated with cold adhesive. Contains box of 5 boards

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

Each white ProMountCor foam board is coated with a heat-activated adhesive and a 5mil film laminate hinged at the top edge to form a pouch. Available in gloss, satin and luster finishes. To mount and laminate, slide a print between the film and board, then feed it through the laminator. ProMountCor is made of 3/16" white, dense, foam board coated with heat-activated adhesive. ProMountCor's adhesive forms a strong, permanent bond in the press as it reaches its low 130°F bonding temperature making it safe to mount: all digital printing, toner copiers, laser, plotters, water borne, solvent, UV and latex inkjet, resin coated and digital photo papers, posters and prints, synthetic papers and substrates, and polyester encapsulated charts and maps. Its permanent bond also means no edge lift when removed from the press, no mess, and it is perfect for bonding using multiple bites in a mechanical press. No removable HA board offers that option. It offers the lowest bonding temperature of any heat activated board available. Its specially formulated neutral pH adhesive is stable, inert and has revolutionized the industry with its dependable 130°F (54°C) low temperature/short dwell bond time in mount presses. ProMountCor aggressively mounts all porous papers, photographs, and previously heat sensitive digitals in dry mount presses or rollers. This makes it the perfect choice for both long term picture framing and short term sign/display mounting applications.

MAXIMIZE OUTPUT. MINIMIZE TOLERANCE.
• VECT 65 Thermal Regulation gives you 2X the dimensional accuracy in real polymers and composites.
• Print continuously for hours, days, or weeks, thanks to METHOD’s unmatched industrial build quality.
• Configurable to meet your needs, METHOD’s compact footprint allows for desktop, benchtop, and racked setups.
EASILY PROTOTYPE IN THE SAME MATERIAL AS YOUR PRODUCTION PARTS
• Sure we’ve got PLA, but we’ve also got PETG, Nylon, Nylon Carbon Fiber – and they all print beautifully.
• Plug in the LABS GEN 2 Experimental Extruder for unbridled 3rd party material printing.
• ClimateSeal™ Filament Bays protect materials from the elements bag to print with pristine quality.
• 4-in-1 Modular Performance Extruders allow for quick change between material groups, preventing cross-contamination.
JUST PRINT.
• 5” capacitive touchscreen provides an intuitive step-by-step setup and real-time controls on your jobs.
• SmartAssist™ Material Loading makes material changing a breeze from material bay to extruder, hands-free.
• MakerBot CloudPrint™ Software brings intuitive printing for even the toughest jobs.
• Safely Print anywhere with Greenguard-certified MakerBot Clean Air™ Smart Filtration System.
• MakerCare Live Training will take you seamlessly from unboxing to advanced printing

Features
• Dual Performance Extruders
• Dry-sealed material bays
• Wifi Connectivity and 21 on-board sensors
• Remote Monitoring & Printing
• 25 compatible CAD file types
• 5" Full-color capacitive touch screen
• Over 300,000 hours of reliability testing

Includes
• 1 MakerBot METHOD 3D Printer
• 1 Spring Steel Build Plate
• 1 Performance Extruder 1 Model (Version 1)
• 1 Performance Extruder 2 Support (Version 1)
• 1 Nozzle Brush
• 1 Hex Key
• 1 USB A-to-B Cable
• 1 US Power Cord
• 1 EU Power Cord

The Support 2A Performance Extruder is optimized for printing with soluble support material such as MakerBot Precision PVA. Features • Smart sensors for material management and print protection • Greater torque with a 19:1 dual-drive gear ratio • Lengthened thermal core with less than 60-second heat up time • Quick-release locking extruder mount for high stability printing and easy swapability • 1-year expected lifetime based on typical usage (Typical usage is estimated at 1,500 hours of printing for the Support 2 Performance Extruder)

The Performance Extruder for Method is built for high-speed printing without compromising part accuracy. The Model 1 Performance Extruder is optimized for printing with model materials such as MakerBot Precision PLA and MakerBot Precision Tough. Features • Smart sensors for material management and print protection • Greater torque with a 19:1 dual-drive gear ratio • Lengthened thermal core with less than 60-second heat up time • Quick-release locking extruder mount for high stability printing and easy swapability • 1-year expected lifetime based on typical usage (Typical usage is estimated at 800 hours of printing for the Model 1 Performance Extruder)

The MakerBot SKETCH supplies you with what you need to integrate 3D printing into the new school year successfully – whether that’s back in the classroom or teaching from home. With over 15 hours of online student curriculum and a cloud-based software to manage your students’ projects you can unlock students' creative potential with accessible 3D printing.

Features:

• Easy to use MakerBot SKETCH with reliable, tinker-free performance.
• ISTE-Certified self-paced 3D printer training for one teachers and five students.
• Cloud-based, 3D printing file management with MakerBot Cloud printing file management software, integrated with TinkerCad & Fusion 360.
• 600+ certified lesson plans from educators all across the country.

Includes:

• Sketch Printer
• Spools of PLA
• Build Plates
• Spatula
• Snip
• Seat in Teacher Certifications
• Seats in Student Certifications
• MakerBot Cloud with Print Queuing
• 1-year warranty
• FREE MakerBot Educators Guidebook for a limited time